Zobrazeno 1 - 10
of 21
pro vyhledávání: '"Kazimierz Czechowski"'
Publikováno v:
Medžiagotyra, Vol 21, Iss 4, Pp 511-516 (2015)
D2 belongs to traditional steels, frequently used in metalworking industry. Shot peening and nitriding are known to improve the wear resistance of D2. In this work we focus on processes of slide burnishing and industrial low temperature gas nitriding
Externí odkaz:
https://doaj.org/article/d881d09261044bbdaab40107767407bc
Autor:
Piotr BEDNARSKI, Dionizy BIAŁO, Witold BROSTOW, Kazimierz CZECHOWSKI, Waldemar POLOWSKI, Piotr RUSEK, Daniel TOBOŁA
Publikováno v:
Medžiagotyra, Vol 19, Iss 4, Pp 367-372 (2013)
Burnishing of metal surfaces can affect positively tribological and mechanical properties such as fatigue strength, wear resistance, contact stiffness and bearing capacity. Burnishing affects the entire surface topography, including surface roughness
Externí odkaz:
https://doaj.org/article/6eebc24156fc48808b5ea3b5e902efe4
Autor:
Tadeusz Krzywda, Jolanta Laszkiewicz-Łukasik, Lucyna Jaworska, Maciej Dyzia, Kazimierz Czechowski, Piotr Putyra, Marcin Podsiadło
Publikováno v:
Journal of Applied Materials Engineering. 60:11-20
This paper presents the results of the processes of treating aluminum matrix casting materials with the addition of a ceramic phase. The matrix of the composite material was an Al-Si7 casting alloy with addition of 2 mass% Mg. The volume fraction of
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::6d52e577103772fc937c72811fe46784
https://doi.org/10.35995/jame60010002
https://doi.org/10.35995/jame60010002
Autor:
Kazimierz Czechowski
Publikováno v:
Mechanik. 92:406-409
Selected issues related to increasing the productivity of machining were presented. Examples of increasing the tool life by depositing nanostructured PVD coatings on blades are presented. The increase of productivity through selection of machining pa
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::c09d1aec06383efba8a776cc3a7428c6
https://doi.org/10.17814/mechanik.2019.7.45
https://doi.org/10.17814/mechanik.2019.7.45
Publikováno v:
Mechanik. 92:174-178
The state of the art of deposition of wear resistant coatings on cemented carbide and high speed steel cutting tools is presented with special regard to new possibilities in this field. On the ground of some results of research carried out at the Ins
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::a08e2f713ca1ef63f464ce92729d25c8
https://doi.org/10.17814/mechanik.2019.3.26
https://doi.org/10.17814/mechanik.2019.3.26
Publikováno v:
Wear. :29-39
There are two basic options for improvement of surfaces of heat treated tool steels for cold working: mechanical treatment such as burnishing, or else chemical modification such as nitriding. The latter is affected not only by the nature of the chemi
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::ea77e0adfcd85bb9f5de33c738122566
https://doi.org/10.1016/j.wear.2017.03.023
https://doi.org/10.1016/j.wear.2017.03.023
Autor:
Kazimierz Czechowski
Publikováno v:
Mechanik. 90:28-33
The state of the art of deposition of wear resistant coatings on cutting tools and cold forming tools is briefly reported. Some the PVD arc coatings developed and deposited at the Institute of Advanced Manufacturing Technology (IAMT) are discussed. T
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::14384d317d6cd2c101f77d6c50154ea8
https://doi.org/10.17814/mechanik.2017.1.27
https://doi.org/10.17814/mechanik.2017.1.27
Publikováno v:
Mechanik. :613-617
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::c21488c75316e7070ec7a014d75133ef
https://doi.org/10.17814/mechanik.2016.7.223
https://doi.org/10.17814/mechanik.2016.7.223
Autor:
Kazimierz Czechowski, Krzysztof Zagórski, Witold Brostow, Łukasz Janczewski, Haley E. Hagg Lobland, Daniel Toboła, Marcin Kot
Publikováno v:
Tribology International. 93:36-42
We have end milled surfaces and then applied ball burnishing to specimens of low density high molecular mass polyethylene (LDPE). An important objective was roughness minimization. For selected ball diameters, the influence of burnishing parameters s
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::56614bf51743842f61fe2b1f8e1b1637
https://doi.org/10.1016/j.triboint.2015.09.006
https://doi.org/10.1016/j.triboint.2015.09.006
Autor:
Kazimierz Czechowski, Daniel Toboła
Publikováno v:
Mechanik. 90:552-554
Results of the research performed at the Institute of Advanced Manufacturing Technology (IAMT) regarding the possibility of slide burnishing of metal alloys and metal matrix composites are presented. Results include among others, analysis of surface
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::849060b74b3135a991c870d2a33d2bdd
https://doi.org/10.17814/mechanik.2017.7.70
https://doi.org/10.17814/mechanik.2017.7.70