Zobrazeno 1 - 7
of 7
pro vyhledávání: '"Kazem Doosthosseini"'
Publikováno v:
تحقیقات علوم چوب و کاغذ ایران, Vol 29, Iss 3, Pp 368-375 (2014)
This study was conducted to investigate the effect of Cu nano particles addition on the density profile and mechanical properties of medium density fiberboard. One layer fiberboard (MDF) with the density of 0.58g/cm3and thickness of 17 mm were produc
Externí odkaz:
https://doaj.org/article/e479394635a8483aad10b45552243ed1
Autor:
Aliakbar Ramtin, Kazem Doosthosseini, Behnaz Dadkhah tehrani, Mohammad ali Podinehpoor, Majid Chaharmahali
Publikováno v:
تحقیقات علوم چوب و کاغذ ایران, Vol 21, Iss شماره 2, Pp 70-77 (2006)
The objective of this research was to characterize the physical and mechanical properties of Aspen OSB made with different percentage of resin as well as in different orientation of strand. Mechanical and physical properties such as bending strength.
Externí odkaz:
https://doaj.org/article/f9cac33bdc414559ad8e000682ebf1c2
Autor:
Abolfazl Kargarfard, Abdolrahman Hosseinzadeh, Kazem Doosthosseini, Ahmad Jahan latibari, Amir Nourbakhsh
Publikováno v:
تحقیقات علوم چوب و کاغذ ایران, Vol 20, Iss شماره 1, Pp 95-110 (2005)
In this investigation, experimental boards were produced using beech wood particle, mat moisture content gradient at 0,3 and 6%, two press temperature sat 165and 1850 C and two press times at 3 and 5 minutes. 36 sample boards produced and the physica
Externí odkaz:
https://doaj.org/article/57aee5793f93459b8e485b6b28c36742
Autor:
Amir Nourbakhsh, Abdolrahman Hosseinzadeh, Kazem Doosthosseini, Abolfazl Kargarfard, Mazyar Radkyan
Publikováno v:
تحقیقات علوم چوب و کاغذ ایران, Vol 20, Iss شماره 1, Pp 111-132 (2005)
In this investigation feasibility of Beech slabs in particleboards production were prepared at three different contents resin of 9, 10, and 11 percent, press temperatures of 165°C and 175°C and hardener contents of 1.5 and 2.5 percent.Based on the
Externí odkaz:
https://doaj.org/article/f03bb689807d4c34a00e565c79578456
Publikováno v:
تحقیقات علوم چوب و کاغذ ایران, Vol 19, Iss شماره 2, Pp 137-158 (2004)
Beneficial utilization of large quantity of paper sludge from Mazandaran Wood & Paper Industry in particleboard manufacturing has been studied. Single-layer and three-layer particleboard (paper sludge as a surface layer) were produced. Urea-formaldeh
Externí odkaz:
https://doaj.org/article/f8a0894950b448b9939c2b688393dd9f
Publikováno v:
Drvna industrija
Volume 69
Issue 3
Volume 69
Issue 3
The aim of this study was to evaluate some mechanical and physical properties of medium density fiberboards (MDF) made from different adhesive types. Five panel types were made from mixtures of tannin (T) to urea formaldehyde (UF) and tannin to melam
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::372f4ffe5ecf01ff15961d0058967a23
https://doi.org/10.5552/drind.2018.1726
https://doi.org/10.5552/drind.2018.1726
Publikováno v:
European Journal of Wood and Wood Products. 74:609-616
To diminish the formaldehyde emission, replacement of the formaldehyde by furfural in urea formaldehyde (UF) resin was investigated and its effect on formaldehyde emission and physical–mechanical properties of particleboard panels produced from pop
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::2e62cfc40f32fdaa100999fb293b5387
https://doi.org/10.1007/s00107-016-1005-6
https://doi.org/10.1007/s00107-016-1005-6