Zobrazeno 1 - 10
of 257
pro vyhledávání: '"Kawulok R."'
Publikováno v:
Journal of Mining and Metallurgy. Section B: Metallurgy, Vol 55, Iss 3, Pp 413-426 (2019)
The CCT and two DCCT diagrams were constructed for the HSLA steel containing Cr, V, Nb, and N microadditions, taking into account industrial processing parameters of this material in a seamless tubes rolling mill. The typical finish hot rolling tempe
Externí odkaz:
https://doaj.org/article/77a2fcd87d674abaa691322bd36e28f3
Autor:
SCHINDLER, I., KAWULOK, P., KONEČNÁ, K., SAUER, M., NAVRÁTIL, H., OPĚLA, P., KAWULOK, R., RUSZ, S.
Publikováno v:
Archives of Metallurgy & Materials; 2023, Vol. 68 Issue 2, p741-747, 7p
Autor:
Schindler I., Hadasik E., Kopeček J., Kawulok P., Fabík R., Opěla P., Rusz S., Kawulok R., Jabłońska M.
Publikováno v:
Archives of Metallurgy and Materials, Vol 60, Iss 3, Pp 1693-1702 (2015)
Use of the protective steel capsules enabled to manage the laboratory hot flat rolling of the extremely brittle as-cast aluminide Fe-40at.%Al-Zr-B with the total height reduction of almost 70 %. The hot rolling parameters were optimized to obtain the
Externí odkaz:
https://doaj.org/article/c17aff82c7584d37aa769fa80c73e32a
Autor:
KAWULOK, R.1 rostislav.kawulok@vsb.cz, SCHINDLER, I.1, NAVRÁTIL, H.1, ŠEVČÁK, V.1, SOJKA, J.1, KONEČNÁ, K.1, CHMIEL, B.2
Publikováno v:
Archives of Metallurgy & Materials. 2020, Vol. 65 Issue 2, p727-734. 8p.
Autor:
KAWULOK, R.1 rostislav.kawulok@vsb.cz, SCHINDLER, I.1, MIZERA, J.2, KAWULOK, P.1, RUSZ, S.1, OPĚLA, P.1, PODOLÍNSKÝ, P.3, ČMIEL, K. M.3, MALIŠ, M.4
Publikováno v:
Archives of Metallurgy & Materials. 2018, Vol. 63 Issue 1, p55-60. 6p.
Publikováno v:
High Temperature Materials and Processes, Vol 32, Iss 2, Pp 149-155 (2013)
Influence of the methodology of mathematical processing of experimental data on the calculated value of the activation energy in hot forming was evaluated for three very different alloys: iron aluminide, low-alloyed steel and magnesium alloy. Applica
Externí odkaz:
https://doaj.org/article/004a38fc087041ba9cb3cabb1f704698
Autor:
KAWULOK, R.1, SCHINDLER, I.1, KAWULOK, P.1, RUSZ, S.1, OPĚLA, P.1, KLIBER, J., SOLOWSKI, Z.2, ČMIEL, K. M.2, PODOLÍNSKÝ, P.2, MALIŠ, M.3, VAŠEK, Z.3, VANČURA, F.4
Publikováno v:
Metalurgija. 2016, Vol. 55 Issue 3, p357-360. 4p.
Autor:
KAWULOK, R.1 rostislav.kawulok@vsb.cz, KAWULOK, P.1, SCHINDLER, I.1, OPĚLA, P.1, RUSZ, S.1, ŠEVČÁK, V.1, SOLOWSKI, Z.2
Publikováno v:
Archives of Metallurgy & Materials. 2018, Vol. 63 Issue 4, p1735-1741. 7p.
Autor:
KAWULOK, P.1, KAWULOK, R.1, SCHINDLER, I.1, RUSZ, S.1, KLIBER, J.1, UNUCKA, P.2, ČMIEL, K. M.3
Publikováno v:
Metalurgija. 2014, Vol. 53 Issue 3, p299-302. 4p.
Autor:
Sauer M; Liberty Ostrava, a.s., Vratimovská 689/117, 71900 Ostrava, Czech Republic.; Faculty of Materials Science and Technology, VŠB-Technical University of Ostrava, 17., 70800 Ostrava, Czech Republic., Fabík R; Liberty Ostrava, a.s., Vratimovská 689/117, 71900 Ostrava, Czech Republic., Schindler I; Faculty of Materials Science and Technology, VŠB-Technical University of Ostrava, 17., 70800 Ostrava, Czech Republic., Kawulok P; Faculty of Materials Science and Technology, VŠB-Technical University of Ostrava, 17., 70800 Ostrava, Czech Republic., Opěla P; Faculty of Materials Science and Technology, VŠB-Technical University of Ostrava, 17., 70800 Ostrava, Czech Republic., Kawulok R; Faculty of Materials Science and Technology, VŠB-Technical University of Ostrava, 17., 70800 Ostrava, Czech Republic., Vodárek V; Faculty of Materials Science and Technology, VŠB-Technical University of Ostrava, 17., 70800 Ostrava, Czech Republic., Rusz S; Faculty of Materials Science and Technology, VŠB-Technical University of Ostrava, 17., 70800 Ostrava, Czech Republic.
Publikováno v:
Materials (Basel, Switzerland) [Materials (Basel)] 2022 Dec 28; Vol. 16 (1). Date of Electronic Publication: 2022 Dec 28.