Zobrazeno 1 - 10
of 33
pro vyhledávání: '"Katica Sertić-Bionda"'
Publikováno v:
Petroleum Science and Technology. 36:68-74
The effect of reaction temperature, mixing speed and oxidant to catalyst volume ratio, including their interactions on the oxidative desulfurization of dibenzothiophene by using response surface methodology was studied. Hydrogen peroxide was used as
Publikováno v:
Applied Acoustics. 103:202-206
Very stringent environmental regulations have limited the level of sulfur in diesel, therefore deep desulfurization of fuels is required. For that purpose, the frequently used industrial process is hydrodesulfurization (HDS) which enables effective e
The ultrasound-assisted oxidative desulphurization (UAOD) process of diesel fuel has gained growing attention due to the strict regulation of sulphur content in the fuel. The goal of the present study was to investigate the impact of ultrasound (US)
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::746cb632569cbb41c95eaab77306f5d4
https://doi.org/10.1080/09593330.2015.1068870
https://doi.org/10.1080/09593330.2015.1068870
Publikováno v:
Petroleum Science and Technology. 29:2361-2371
Desulfurization of diesel fuel was investigated in a fixed bed adsorption column using activated carbon as an adsorbent. The experiments were carried out at different feed flow rates, bed depths, and temperatures, and each experiment resulted in at l
Publikováno v:
Chemical Engineering and Processing: Process Intensification. 50:409-416
Adsorptive removal of organosulfur compounds, lumped as total sulfur content, from a real diesel fuel was carried out in a packed bed adsorber. A novel approach was taken in the application of theoretical solutions to the differential mass balance eq
Increasing the purity of hydrogen-containing catalytic reforming gas by a physical absorption method
Publikováno v:
Chemistry and Technology of Fuels and Oils. 46:170-177
A new solution for obtaining high-purity hydrogen was developed at Rijeka Oil Refinery based on modern industrial technologies. This solution allows rapidly and inexpensively expanding the possibilities of the catalytic reforming process and as a res
Publikováno v:
Chemical Engineering & Technology. 33:1137-1145
Adsorptive desulfurization enables the attainment of ultra-low sulfur content in hydrocarbon fuels by removing the refractory sulfur compounds, which are difficult to remove in hydrodesulfurization (HDS) processing when sulfur concentrations below 10
Publikováno v:
Chemical Engineering Communications. 197:275-288
A five-lump kinetic model had been developed for modeling of gas oil catalytic cracking. The experiments were carried out in a standard fixed bed micro-activity test (MAT) reactor. Distribution of the cracking product components was determined as a f
Publikováno v:
Chemical Engineering & Technology. 31:355-364
Diesel fuel desulfurization by different commercial activated carbons was studied in a batch adsorber. Experiments, carried out to determine the sulfur adsorption dependency on time, were used to perform kinetic characterization and to screen the bes
Publikováno v:
Petroleum Chemistry. 48:6-14
Catalytic cracking of gas oils has been studied in a standard microactivity test (MAT) reactor. The cracking product distribution was measured as a function of temperature. Based on these experimental results, a four-lump kinetic model was developed.