Zobrazeno 1 - 10
of 90
pro vyhledávání: '"Kadhim K. Resan"'
Publikováno v:
Science and Technology Indonesia, Vol 9, Iss 4, Pp 806-817 (2024)
Obtaining novel scaffolds on bone disease-affected cells with osteoconductivity has recently been the focus of tissue engineering methodologies. Chemical treatment and microwave radiation form a novel strategy to create graphene oxide nanosheets (Gns
Externí odkaz:
https://doaj.org/article/75198d6910d249afb321e8431f15a3bd
Autor:
Zainab H. Zaier, Kadhim K. Resan
Publikováno v:
Journal of Engineering and Sustainable Development, Vol 26, Iss 4, Pp 63-69 (2022)
One of the most important problems that the components of the prosthetic limbs suffer from; the increase in walking speed leads to an increase in the ground reaction force. In this research, a new shank was design and manufactured using the porous fu
Externí odkaz:
https://doaj.org/article/988ef92773af4a3f8faef369190874b1
Publikováno v:
Journal of Engineering, Vol 20, Iss 3 (2023)
In this research an analysis for improving the fatigue behavior (safety factor of fatigue) of non- articular prosthetic foot (SACH) in the region (Bolt Adapter).The laser peening was carried to the fatigue specimens to improving the fatigue propertie
Externí odkaz:
https://doaj.org/article/a147b89e3bd048a6a4cf292fb29e7d7f
Autor:
Mustafa Saad Kadhim, Kadhim K. Resan
Publikováno v:
Journal of Engineering and Sustainable Development, Vol 27, Iss 3 (2023)
The influence of friction pressure on welding quality when friction stud welding 1017 low carbon steel with AISI 304 austenitic stainless steel is investigated in this study. friction stud welding is employed in industrial applications instead of con
Externí odkaz:
https://doaj.org/article/af901c5ce7234022b1aaf8a5084f00c9
Autor:
Ali A. Mnati, Kadhim K. Resan
Publikováno v:
Journal of Engineering and Sustainable Development, Vol 27, Iss 1 (2023)
Ductile cast iron is also called spheroidal graphite cast iron or nodular cast iron. It contains graphite in the semblance of nodules. Automobile scrap (i.e., the engine block) made from gray cast iron was used in this study. In this paper, the recyc
Externí odkaz:
https://doaj.org/article/348900e276e649729f908568845490d4
Publikováno v:
Journal of Biomimetics, Biomaterials and Biomedical Engineering. 58:3-12
In this study the effect of adding different weight ratio (0.5, 1, 1.5, 2)% of TiO2 nanoparticles powder extend the life of removable partial dentures made by PMMA was studied.The PMMA has low mechanical properties. Then the life is relatively short.
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::d5bd19be328fc096e911d00310ae7efb
https://doi.org/10.4028/p-i5yta0
https://doi.org/10.4028/p-i5yta0
Publikováno v:
Key Engineering Materials. 924:37-46
In this study, an attempt has been made to produce ductile iron or spheroidal graphite iron and to study its important properties with a view to reduce the import of machinery parts made of ductile iron. Locally available compressor scrap (i.e. the c
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::ceb8878b6583275d0609043e811b5dbf
https://doi.org/10.4028/p-oko587
https://doi.org/10.4028/p-oko587
Publikováno v:
مجلة النهرين للعلوم الهندسية, Vol 20, Iss 3 (2017)
A theoretical and experimental investigation pertaining to the buckling behavior of slender fiber reinforced polymer columns subjected to axial loading under varying temperatures (from room temperature to 50℃). Two groups of composite materials wer
Externí odkaz:
https://doaj.org/article/4d4a59ea487942758c452d33a699ffa3
Publikováno v:
مجلة النهرين للعلوم الهندسية, Vol 20, Iss 1 (2017)
Friction stir welding (FSW), a solid-state welding process, it’s involve a welding by friction between two metals or alloys, and also using for the joining of dissimilar materials due to the lower processing temperature over conventional fusion wel
Externí odkaz:
https://doaj.org/article/d9c6e8f48d9943139772d440e6e6d6c4
Publikováno v:
مجلة النهرين للعلوم الهندسية, Vol 20, Iss 1 (2017)
Abstract In this study a Nickel-Titanium-Cupper shape memory alloys was manufactured by powder metallurgy (PM) technique, powder mixture of 50% Ti , 47% Ni and 3% Cu was prepared by mixing for two hours and compacted in a press machine using vari
Externí odkaz:
https://doaj.org/article/39f3a9a750ff48babfdd5ee86d912982