Zobrazeno 1 - 10
of 15
pro vyhledávání: '"K. Vandierendonck"'
Publikováno v:
Surface and Coatings Technology. 113:80-85
Due to their high hardness and low friction coefficient, diamond-like carbon (DLC), amorphous hard carbon (HC), and diamond coatings have great potential for dry cutting operations. The main differences between these coatings can be found in their ha
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::3d993c39e17274ff42ff139ee1ff4284
https://doi.org/10.1016/s0257-8972(98)00831-7
https://doi.org/10.1016/s0257-8972(98)00831-7
Autor:
Lambert Stals, M. Van Stappen, Milos Nesladek, Carl Quaeyhaegens, K. Vandierendonck, S. Kadlec
Publikováno v:
Surface and Coatings Technology. 98:1060-1065
WC films are investigated for use as intermediate layers for adhesion improvement between the cemented carbide (WC-Co) substrate and a CVD diamond wear resistant layer. WC layers are prepared by reactive magnetron sputtering. Deposition conditions du
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::8083dbcb88932676fad6af43e0e21fbc
https://doi.org/10.1016/s0257-8972(97)00553-7
https://doi.org/10.1016/s0257-8972(97)00553-7
Autor:
M. Van Stappen, K. Vandierendonck
Publikováno v:
Surface and Coatings Technology. 97:218-223
The performance of PVD and PCVD coated cermets has been investigated for turning and milling applications. Two different cermet materials were used to have both harder and tougher substrates. The coatings used for the cutting tests were: TiN (PVD), (
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::8c5232e4eec9e45dfca6791ca6c4a071
https://doi.org/10.1016/s0257-8972(97)00552-5
https://doi.org/10.1016/s0257-8972(97)00552-5
Publikováno v:
Thin Solid Films. 300:189-196
The influence of the thickness of CVD diamond coatings on the adhesion to a substrate, after cooling down from deposition temperature to room temperature, has been studied experimentally and theoretically. Diamond layers have been deposited at 850°C
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::be69d64762f6a982fd39291f6d0dce08
https://doi.org/10.1016/s0040-6090(96)09497-7
https://doi.org/10.1016/s0040-6090(96)09497-7
Publikováno v:
Thin Solid Films. 270:184-188
WTCM,B-3590 DIEPENBEEK,BELGIUM.Nesladek, M, LIMBURGS UNIV CENTRUM,INST MAT RES,DIV MAT PHYS,CAMPUSLAAN 1,B-3590 DIEPENBEEK,BELGIUM.
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::bd8026239a72f49fc3958ff3644c5268
https://doi.org/10.1016/0040-6090(95)06914-3
https://doi.org/10.1016/0040-6090(95)06914-3
Autor:
J. Vlekken, Jan D'Haen, Carl Quaeyhaegens, Lambert Stals, Marc D'olieslaeger, K. Vandierendonck, Milos Nesladek
Publikováno v:
Surface and Coatings Technology. :819-826
CVD diamond coatings are expected to increase significantly the lifetime of cemented carbide tools. The preparation of such coatings is, however, hindered by the presence of the Co binder phase. Because of its catalyst function, Co promotes the forma
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::809010df96b700fa6491969287da768a
https://doi.org/10.1016/0257-8972(94)08202-2
https://doi.org/10.1016/0257-8972(94)08202-2
Publikováno v:
Surface and Coatings Technology. :143-145
Different types of anti-sticking coatings have been applied industrially on injection moulds for various types of plastics. Very often these tests are being done on a trial-and-error basis and results obtained are difficult to interpret. WTCM/CRIF ha
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::a85cf2ceac7dc67fedc6b947083a5e6c
https://doi.org/10.1016/s0257-8972(01)01062-3
https://doi.org/10.1016/s0257-8972(01)01062-3
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
K zobrazení výsledku je třeba se přihlásit.
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
K zobrazení výsledku je třeba se přihlásit.
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
K zobrazení výsledku je třeba se přihlásit.