Zobrazeno 1 - 10
of 251
pro vyhledávání: '"K. Radon"'
Publikováno v:
Metalurgija, Vol 63, Iss 1, Pp 53-56 (2024)
The paper presents the results of tribological tests of the Ti13Nb13Zr titanium alloy - carried out in the conditions of lubrication with liquids simulating body fluids. Artificial saliva solutions were used for the tests. Two pH values were used –
Externí odkaz:
https://doaj.org/article/32fc096dba3c4c4f9db90c53a58f796c
Publikováno v:
Metalurgija, Vol 63, Iss 1, Pp 57-60 (2024)
The HS6-5-2C steel samples with different surface roughness were used for the tests. After grinding had a roughness parameter of Ra = 0,03 μm, and after polishing Ra = 0,01 μm. A TiAlN coating was applied to the substrate prepared in this way. Usin
Externí odkaz:
https://doaj.org/article/bca42754432a41db900376d35356d136
Publikováno v:
Metalurgija, Vol 63, Iss 1, Pp 85-88 (2024)
This paper presents the tribological properties of diamond-like-carbon coatings (DLC) doped with tungsten. The hardness of the DLC coating was determined using a micro-hardness tester. Friction tests were carried out on a tribometer in rotational mot
Externí odkaz:
https://doaj.org/article/714a8dfeccd448cbaa610da3b975cd18
Autor:
K. Radon-Kobus, M. Madej
Publikováno v:
Metalurgija, Vol 61, Iss 3-4, Pp 657-660 (2022)
The paper presents the method of forming TiO2 coatings on 100Cr6 steel using the ALD method and assessing the properties of the obtained coatings. The coatings were assessed in terms of surface morphology, chemical composition, contact angle and trib
Externí odkaz:
https://doaj.org/article/a4d95eb55ade48bfb908180562e494a6
Autor:
G. Castaño-Vinyals, S. Sadetzki, R. Vermeulen, F. Momoli, M. Kundi, F. Merletti, M. Maslanyj, C. Calderon, J. Wiart, A.-K. Lee, M. Taki, M. Sim, B. Armstrong, G. Benke, R. Schattner, H.-P. Hutter, D. Krewski, C. Mohipp, P. Ritvo, J. Spinelli, B. Lacour, T. Remen, K. Radon, T. Weinmann, E.Th. Petridou, M. Moschovi, A. Pourtsidis, K. Oikonomou, P. Kanavidis, E. Bouka, R. Dikshit, R. Nagrani, A. Chetrit, R. Bruchim, M. Maule, E. Migliore, G. Filippini, L. Miligi, S. Mattioli, N. Kojimahara, N. Yamaguchi, M. Ha, K. Choi, H. Kromhout, G. Goedhart, A. 't Mannetje, A. Eng, C.E. Langer, J. Alguacil, N. Aragonés, M. Morales-Suárez-Varela, F. Badia, A. Albert, G. Carretero, E. Cardis
Publikováno v:
Environment International, Vol 160, Iss , Pp 107069- (2022)
In recent decades, the possibility that use of mobile communicating devices, particularly wireless (mobile and cordless) phones, may increase brain tumour risk, has been a concern, particularly given the considerable increase in their use by young pe
Externí odkaz:
https://doaj.org/article/c3179b3fbc054cb29edde58f7a883da8
Publikováno v:
Occupational Medicine. 66:471-477
Background The use of snap-fit fasteners in automotive assembly has increased in the last 10 years. Their impact on musculoskeletal function of the upper limbs in assembly workers is not well described. Aims To investigate the association between sna
Publikováno v:
Accident Prevention.
Introduction Garbage collector is a high-risk job, with exposure to a variety of occupational and non-occupational factors. Total injury rates of occupational accidents in these workers are not known in Paraguay, the aim of the study was to estimate
Publikováno v:
Das Gesundheitswesen. 76
Publikováno v:
ASU International. 2014
Publikováno v:
Allergy. 55:219-225
Background: The aim of the present study was to determine the distribution of mite allergens in pig-farming environments in comparison to urban homes and the relationship between exposure to mite allergens and sensitization to the respective allergen