Zobrazeno 1 - 10
of 12
pro vyhledávání: '"Kürşad GÖV"'
Autor:
Edip ÖZTÜRK, Kürşad GÖV
Publikováno v:
Volume: 38, Issue: 3 1645-1660
Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi
Journal of the Faculty of Engineering and Architecture of Gazi University
Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi
Journal of the Faculty of Engineering and Architecture of Gazi University
Günümüzde teknolojinin gelişimiyle birlikte simülatörlerin kullanım alanları çeşitlenerek artmaktadır. Simülatörler her sektörde kendilerine yer bulabildikleri gibi havacılık ve uzay çalışmalarında da büyük rol oynamaktadırlar.
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::17e94ff98db1dba11c739239977858ef
https://doi.org/10.17341/gazimmfd.1103916
https://doi.org/10.17341/gazimmfd.1103916
Autor:
Omer Eyercioglu, Kürşad Göv
Publikováno v:
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 235:125-133
This study presents an experimental investigation of small hole electrical discharge machining of Al-Mg-Ti alloys. A series of drilling operations were carried out for exploring the effect of magnesium content. Holes of 2 mm diameter and 15 mm depth
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::13aec91963f0207b362696db7d59e4a1
https://doi.org/10.1177/0954405420949211
https://doi.org/10.1177/0954405420949211
Publikováno v:
Volume: 35, Issue: 3 1159-1170
Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi
Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi
Aşındırıcı macun ile yüzey işleme metodu geleneksel olmayan yüzey bitirme yöntemlerinden biridir. Üretim teknolojilerinin ilerlemesiyle birlikte endüstride kullanılan parçalar giderek daha karmaşık bir şekil almıştır. Özellikle ha
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::3b32c63651f39b0ae76d30edf1ea2ecc
https://doi.org/10.17341/gazimmfd.606484
https://doi.org/10.17341/gazimmfd.606484
Autor:
Kürşad Göv, Aykut Akbulut
Publikováno v:
El-Cezeri Fen ve Mühendislik Dergisi.
In this study, Electrical Discharge Micro Hole Drilling process applied to specific aerospace material of Ti-6Al-4V. Although Hole-EDM drilling uses the same principles as other EDM methods, a rotated hollow electrode and pumping of dielectric coolan
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::c7f1358ba9b0a089536c01ee61738085
https://doi.org/10.31202/ecjse.691532
https://doi.org/10.31202/ecjse.691532
Autor:
Kürşad Göv
Publikováno v:
The International Journal of Advanced Manufacturing Technology. 92:1255-1262
In this study, electrical discharge hole drilling processes was applied to DIN 1.2379 tool steel by using single-channel brass electrode and dielectric liquid which possess various level of temperature. In the study, the machining parameters were kep
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::eefad66b47090cb3f621ceaffa863ba9
https://doi.org/10.1007/s00170-017-0231-3
https://doi.org/10.1007/s00170-017-0231-3
Autor:
Omer Eyercioglu, Kürşad Göv
Publikováno v:
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 232:1044-1053
In this article, the effect of abrasive types on the abrasive flow machining process was investigated. Four groups of abrasive media were prepared with different types of abrasives: SiC, AL2O3, B4C and Garnet. An experimental study was performed on D
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::cbf14e4d628a16708e2f8d716c99d8c9
https://doi.org/10.1177/0954405416662080
https://doi.org/10.1177/0954405416662080
Autor:
Kürşad Göv
Publikováno v:
Volume: 32, Issue: 1
Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi
Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi
Bu calismada, havacilik malzemelerinden titanyum alasimina (Ti6Al4V) ve nikel alasimina (Inkonel 718), tek oluklu pirinc elektrotla, icerisinde farkli tiplerde sogutma sivisi (musluk suyu, saf su ve kerosen) kullanilarak elektro erozyon ile delik del
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::cfa6b05d294c98ed0ca16db232959d48
https://doi.org/10.17341/gazimmfd.300621
https://doi.org/10.17341/gazimmfd.300621
Publikováno v:
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 228:51-61
This study investigates the effects of electro-discharge parameters on the surface integrity in small-hole drilling. Discharge current, pulse on-time and pulse off-time were chosen as variable parameters. The gap voltage, dielectric flushing pressure
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::fa884f2c19b1fdb36bbe1959a1125736
https://doi.org/10.1177/0954405413498730
https://doi.org/10.1177/0954405413498730
2nd International Conference on Computational and Experimental Science and Engineering (ICCESEN)
WOS: 000384810700100
Science Citation Index Expanded
Conference Proceedings Citation Index- Science
Blanking operation is widely used
WOS: 000384810700100
Science Citation Index Expanded
Conference Proceedings Citation Index- Science
Blanking operation is widely used
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::880532da28c8c916a497e7a52ad3aa1f
https://hdl.handle.net/20.500.12508/864
https://hdl.handle.net/20.500.12508/864
