Zobrazeno 1 - 10
of 12
pro vyhledávání: '"Jyoti Kaswan"'
Publikováno v:
Materials for Renewable and Sustainable Energy, Vol 7, Iss 4, Pp 1-13 (2018)
Abstract The higher methanol utilization efficiency in direct methanol fuel cell (DMFC) is one of the key factors that determine the performance of DMFC. Herein, we have synthesized bimetallic PtCo nano-particles (with optimized Pt:Co ratio) decorate
Externí odkaz:
https://doaj.org/article/ca97ce16d8cc4d5eb5464e3d5cb7cc81
Publikováno v:
Materials for Renewable and Sustainable Energy, Vol 8, Iss 2, Pp 1-1 (2019)
This erratum corrects the following typographical errors in the published article without affecting the scientific results and conclusions of the original article.
Externí odkaz:
https://doaj.org/article/65dc89a3ddbf4f4196a55f765562bb60
Autor:
Brajesh S. Yadav, Prashant Tyagi, A. K. Shukla, Jyoti Kaswan, Ch. Ramesh, Sunil Singh Kushvaha, M. Senthil Kumar
Publikováno v:
RSC Advances. 10:2113-2122
The effect of flexible Ti metal foil surface modification and laser repetition rate in laser molecular beam epitaxy growth process on the evolution of GaN nanorods and their structural, electronic and optical properties has been investigated. The GaN
Autor:
Somnath C. Roy, Senthil Kumar Muthusamy, Sunil Singh Kushvaha, Jyoti Kaswan, Prashant Tyagi, Ajay Kumar Shukla, Swati Dhua, Subish John, Ch. Ramesh
Publikováno v:
Journal of Alloys and Compounds. 805:97-103
We report the direct growth of self-aligned single crystalline GaN nanorod array on flexible Ta metal foil using laser molecular beam epitaxy. Scanning electron microscopy reveals the vertically aligned nanorods on Ta surface having diameters in the
Autor:
Shilpi Verma, Surinder P. Singh, Jyoti Kaswan, Anu Singh, Jaime E. Ramirez-Vick, Kavita Arora, Priti Singh, Ajay Kumar Shukla
Publikováno v:
ACS Applied Materials & Interfaces. 9:27462-27474
An efficient electrochemical transducer matrix for biosensing devices requires specific characteristics, such as fast electron transfer, stability, high surface area, biocompatibility, and presence of specific functional groups, to facilitate biomole
Publikováno v:
RSC Advances. 7:54111-54116
A robust unipolar resistive switching (URS) was successfully observed in sol–gel derived perovskite type Fe-doped strontium titanate (FeSTO) thin films, deposited on an ITO-coated glass substrate by a spin-coating technique. The surface topography
Autor:
Ashok Kumar, A. K. Shukla, Pallavi Kushwaha, Sandeep Singh, Kuldeep Maurya, Jyoti Kaswan, Vikas N. Thakur
Publikováno v:
Journal of Alloys and Compounds. 863:158317
Dielectric, impedance, electric modulus, and ac conductivity properties of KTaO3 (001) (KTO) single crystal have been investigated for temperature and frequency range of 573–973 K and 100 Hz - 1 MHz, respectively. Our results suggest two separate c
Autor:
Surinder P. Singh, Jyoti Kaswan, Shilpi Verma, Anu Singh, Ajay Kumar Shukla, Hemant R. Kushwaha, Priyanshu Arya, Shalini Gupta
Publikováno v:
Biosensors and Bioelectronics. 165:112347
We present a tyrosinase-conjugated zinc oxide-reduced graphene oxide (Tyr/ZnO-rGO) nanocomposite system as a biosensing test-bed for rapid and sensitive detection of dopamine (DA). The bioelectrodes (Tyr/ZnO-rGO/ITO) were designed by covalently immob
Autor:
Jyoti Kaswan, Anjana Dogra, A. K. Shukla, Biswarup Satpati, Bhasker Gahtori, Jiji Pulikkotil, Sumit Kumar
Publikováno v:
Applied Physics Letters. 116:051603
This work reports a quasi-two-dimensional electron gas (q-2DEG) system at the interface of two wideband-gap insulators, (TiO2-terminated) SrTiO3 and LaScO3, with a minimum thickness of 4-unit cell (uc). The highly crystalline and abrupt heterointerfa
Autor:
Jyoti Kaswan, Surinder P. Singh, Richa Baronia, Jyoti Goel, Ajay Kumar Shukla, Sunil K. Singhal
Publikováno v:
Materials for Renewable and Sustainable Energy, Vol 7, Iss 4, Pp 1-13 (2018)
The higher methanol utilization efficiency in direct methanol fuel cell (DMFC) is one of the key factors that determine the performance of DMFC. Herein, we have synthesized bimetallic PtCo nano-particles (with optimized Pt:Co ratio) decorated reduced