Zobrazeno 1 - 10
of 66
pro vyhledávání: '"Jurij J. Sidor"'
Publikováno v:
Materials, Vol 16, Iss 17, p 5760 (2023)
The recrystallization (RX) kinetics of commercially pure Al alloy is studied under the scope of annealing temperature, time, and degree of deformation. To examine the distribution of recrystallization, Johnson–Mehl–Avrami–Kolmogorov (JMAK) theo
Externí odkaz:
https://doaj.org/article/0175249f07c64c78a693e3422c28c1a1
Publikováno v:
Applied Sciences, Vol 13, Iss 7, p 4359 (2023)
The behavior of technically pure aluminum was examined, and this investigation allowed the determination of the material constants by various models. The model parameters derived were subsequently used for the finite element simulations (FEM) of a co
Externí odkaz:
https://doaj.org/article/657857b540ff4127bc39760735d876d1
Autor:
Jurij J. Sidor
Publikováno v:
Metals, Vol 11, Iss 11, p 1759 (2021)
Experimental investigations of the thermomechanical processing (TMP) of metals clearly demonstrate that technological process-tuning parameters have a great influence on the evolution of both microstructure and texture, which determine the chemical,
Externí odkaz:
https://doaj.org/article/9f43a30e311f4208a4fac68d24806d00
Publikováno v:
Metals, Vol 11, Iss 10, p 1571 (2021)
This study examines the evolution of dislocation density in cold rolled 1050 Al alloy. Various techniques such as numerical approaches, indentation techniques, X-ray diffraction line profile analysis, and electron backscattering diffraction were empl
Externí odkaz:
https://doaj.org/article/e037f0b62d9b4cd68ca6c6f4886d08d1
Autor:
Jurij J. Sidor
Publikováno v:
Metals, Vol 11, Iss 8, p 1310 (2021)
This contribution presents the evolution of crystallographic texture during thermomechanical processing of Al alloys. It is shown that the nature of crystallographic changes involved in deformation and recrystallization is strongly affected by the va
Externí odkaz:
https://doaj.org/article/904f730472d14df9951da209007594d5
Autor:
Jurij J. Sidor
Publikováno v:
Metals, Vol 9, Iss 10, p 1098 (2019)
The nature of the thermomechanical processing of materials can be revealed by means of various numerical approaches. The accuracy of a particular model is linked to the boundary conditions employed. Intensive research activities over the past several
Externí odkaz:
https://doaj.org/article/9d03f95dee7a406783bee030608f075a
Publikováno v:
Acta Polytechnica Hungarica. 20:7-23
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::b996f2e3ee0fffe60dcba4c8b329f1a8
https://doi.org/10.12700/aph.20.2.2023.2.1
https://doi.org/10.12700/aph.20.2.2023.2.1
Publikováno v:
Acta Materialia Transylvanica. 5:6-9
The current study reports three different techniques to estimate the distribution of dislocation density at the mid thickness of 1050 Al alloy. It is well known that the strain distribution is inhomogeneous through the thickness of rolled materials,
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::8d927f4a3118e83bdfd3596902fab2b0
https://doi.org/10.33924/amt-2022-01-02
https://doi.org/10.33924/amt-2022-01-02
Autor:
János György Bátorfi, Jurij J. Sidor
Publikováno v:
Lecture Notes in Electrical Engineering ISBN: 9789819902354
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::bc34db7cdac6a4ae068e2f80e6010031
https://doi.org/10.1007/978-981-99-0236-1_31
https://doi.org/10.1007/978-981-99-0236-1_31
Publikováno v:
Mérnöki és Informatikai Megoldások.
The current as well as the future industrial market for Aluminium (Al) is huge and various research is being under work regarding the usability of Aluminium. However, during the deep drawing of Aluminium several issues can be developed and some of th
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::5d014cf137b73d9c725c557134fd6d93
https://doi.org/10.37775/eis.2022.2.6
https://doi.org/10.37775/eis.2022.2.6