Zobrazeno 1 - 10
of 14
pro vyhledávání: '"Junichi Kai"'
Autor:
Yasushi Takahashi, Kenichi Kawashima, Junichi Kai, Akio Yamada, Yoshihisa Oae, Hiroshi Yasuda, Takashi Kiuchi, Motoo Nakano
Publikováno v:
Microelectronic Engineering. 21:149-152
We have developed a variable shaped electron beam lithography system “NOWEL-2” [1,2]. Continuously moving stage exposure mode, which we call CM exposure mode, is used in the system. To achieve high butting and overlay accuracy in CM exposure mode
Autor:
Toshiaki Kawabata, Junichi Kai, Kouji Hosono, Eiichi Hoshino, Junji Hirumi, Tetsuya Hayashimoto
Publikováno v:
SPIE Proceedings.
The budget of reticle pattern placement error, using variable-shaped step and repeat electron beam writer has been studied. There are three major factors in the reticle writing process, the stage moving accuracy, the electron beam deflection accuracy
Autor:
Itaru Tsuge, MD, PhD, Miho Matsui, MD, PhD, Toru Kanno, MD, PhD, Junichi Kaisho, MD, Toshifumi Takahashi, MD, Hiroki Yamanaka, MD, PhD, Motoki Katsube, MD, PhD, Michiharu Sakamoto, MD, PhD, Naoki Morimoto, MD, PhD
Publikováno v:
Plastic and Reconstructive Surgery, Global Open, Vol 9, Iss 6, p e3625 (2021)
Summary:. Edwardsiella tarda is an anaerobe associated with freshwater and marine life. Necrotizing soft tissue infection caused by E. tarda is rare, but its mortality rate is extremely high (61.1%). We experienced a survival case of Fournier’s gan
Externí odkaz:
https://doaj.org/article/ba58f42c646e48cf9b6d0bc11152750a
Publikováno v:
Advances in Superconductivity IV ISBN: 9784431681977
Ag-sheathed Bi2Sr2CaCu2O8+δ (2212) superconducting tapes have been developed by growing the 2212 phase through a partially melted state. In this paper, the Bi2Sr2Ca1−XCu2−XO8+δ (X=0,0.18 and 0.36) powder were investigated. With these powders, s
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::55766b3395ba7ab46b7318ee4a021c9a
https://doi.org/10.1007/978-4-431-68195-3_123
https://doi.org/10.1007/978-4-431-68195-3_123
Publikováno v:
Acta Dermato-Venereologica, Vol 101, Iss 3, p adv00411 (2021)
Externí odkaz:
https://doaj.org/article/1feed44c5dc444ac8e123dfd4c7c3dfc
Publikováno v:
Advances in Superconductivity III ISBN: 9784431681434
We conducted researches on Bi-Pb-Sr-Ca-Cu-O powders, for preparing Ag-sheathed superconducting tapes with high critical current density (Jc) at 77.3 K. Three different powder compositions (Bi8Pb2Sr10Ca10Cu15Ox, Bi9Pb2Sr10Ca11Cu15Ox, and Bi10Pb2Sr10Ca
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::2035381df1162d614e6c752a1031bf0e
https://doi.org/10.1007/978-4-431-68141-0_146
https://doi.org/10.1007/978-4-431-68141-0_146
Publikováno v:
Acta Dermato-Venereologica, Vol 100, Iss 15, p adv00227 (2020)
Abstract is missing (Quiz)
Externí odkaz:
https://doaj.org/article/1eca0491939745b29e33bdbe586e72d1
Publikováno v:
Physica C: Superconductivity. :2323-2324
Polycrystalline oxide superconductors exhibit a complex magnetic susceptibility which is dependent on temperature. For a given applied magnetic field, the imaginary component of the observed susceptibility can be maximized at Tci, the peak temperatur
Autor:
Abe Tomohiko, Maruyama Shigeru, Takashi Kiuchi, Junichi Kai, Hiroshi Yasuda, Soichiro Arai, Yoshihisa Ooae
Publikováno v:
Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures. 14:3813
A blanking aperture array (BAA) has 1024, 25‐μm‐square apertures and blanking electrodes on a 20‐μm‐thick Si membrane with a total aperture ratio of 1/6. These apertures are irradiated with an electron beam, and the electrons passing throug
Autor:
Hiroshi Yasuda, Manabu Ohno, Akio Ookura, Akio Yamada, Kiichi Sakamoto, Shunsuke Fueki, Kobayashi Katsuhiko, Abe Tomohiko, Satoru Sagoh, Takemoto Akio, Junichi Kai, Takamasa Satoh, Yoshihisa Oae, Yamazaki Satoru, Hisayasu Nishino
Publikováno v:
Japanese Journal of Applied Physics. 32:6006
The NOWEL-3 block exposure system that we developed contains a data transaction system, high-speed exposure control hardware and a column which has a block mask and mask deflectors. The block patterns are taken from LSI design data. Three kinds of fo