Zobrazeno 1 - 10
of 137
pro vyhledávání: '"Joseph J Beaman"'
Publikováno v:
International Journal of Ceramic Engineering & Science, Vol 5, Iss 6, Pp n/a-n/a (2023)
Abstract Previous studies have shown that selective laser flash sintering (SLFS) can be initiated in dielectrics that exhibit ionic or electronic conduction at high temperature. These materials required high laser powers to reach the temperatures whe
Externí odkaz:
https://doaj.org/article/62ff6de4fcca4209bf0745e8b990fa92
Publikováno v:
Additive Manufacturing Letters, Vol 2, Iss , Pp 100033- (2022)
The phenomena responsible particle fusion during selective laser sintering (SLS) have been modeled, but attempts at experimental validation have been limited to unrealistic conditions compared to those used in commercial SLS processes. We have design
Externí odkaz:
https://doaj.org/article/5df96d8ff842457caa3d1da73902997c
Publikováno v:
Journal of the American Ceramic Society. 105:6023-6040
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::d72e396d94659cc9d9d61979f799cae1
https://doi.org/10.1111/jace.18574
https://doi.org/10.1111/jace.18574
Publikováno v:
Journal of the American Ceramic Society.
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::4351adf6a9c7b2d5c03f47f8ba616df5
https://doi.org/10.1111/jace.19138
https://doi.org/10.1111/jace.19138
Publikováno v:
Rapid Prototyping Journal. 28:317-329
Purpose Additive manufacturing (AM) of thermoplastic polymers for powder bed fusion processes typically requires each layer to be fused before the next can be deposited. The purpose of this paper is to present a volumetric AM method in the form of de
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::3b94d8a0b137b0f86ca8cccf86a8e9c7
https://doi.org/10.1108/rpj-09-2020-0218
https://doi.org/10.1108/rpj-09-2020-0218
Publikováno v:
International Journal of Applied Ceramic Technology. 18:1988-1998
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::e9d7eaa31bd4f23e3f1ac169bef4ccbe
https://doi.org/10.1111/ijac.13840
https://doi.org/10.1111/ijac.13840
Publikováno v:
SSRN Electronic Journal.
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::b245a521b4962f108eb72681c6edbcfe
https://doi.org/10.2139/ssrn.4113345
https://doi.org/10.2139/ssrn.4113345
Publikováno v:
Additive Manufacturing. 59:103163
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::931bc5bdc97b69909e0420c25b4042d4
https://doi.org/10.1016/j.addma.2022.103163
https://doi.org/10.1016/j.addma.2022.103163
Publikováno v:
International Journal of Chemical Engineering, Vol 2015 (2015)
The most expensive component of a fuel cell is the membrane electrode assembly (MEA), which consists of an ionomer membrane coated with catalyst material. Best-performing MEAs are currently fabricated by depositing and drying liquid catalyst ink on t
Externí odkaz:
https://doaj.org/article/381172375cb1434dae2b5bf2248e17d6
Publikováno v:
Journal of the American Ceramic Society. 103:800-808
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::f42bb1b5862a4387b9f0d8105ff79114
https://doi.org/10.1111/jace.16771
https://doi.org/10.1111/jace.16771