Zobrazeno 1 - 10
of 12
pro vyhledávání: '"Jose Calaf-Chica"'
Publikováno v:
Results in Engineering, Vol 20, Iss , Pp 101465- (2023)
Estimation of the viscoelastic properties of rubber bushings at very high frequencies (up to 2 kHz) is a challenge for many damping component manufacturers in the design stage of a quality monitoring procedure. This investigation is focused on the ca
Externí odkaz:
https://doaj.org/article/dc6f702f281446f9b292869532cdeb0b
Autor:
Jose Calaf-Chica, Pedro-Miguel Bravo-Díez, Mónica Preciado-Calzada, María-José García-Tárrago
Publikováno v:
Materials
Volume 16
Issue 3
Pages: 1179
Volume 16
Issue 3
Pages: 1179
The Small Punch Creep-Recovery Test (SPCRT) is a novel miniature test used to estimate the viscoelastic properties of polymers and biomaterials. The current investigation related to the SPCRT is limited to Finite Element Method (FEM) simulations and
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::7c9705621bdf3a1523134ff19a86e4e8
https://doi.org/10.3390/ma16031179
https://doi.org/10.3390/ma16031179
Publikováno v:
Engineering Failure Analysis. 100:127-146
This study was focused on a metallic part from a dynamic seal of an ultra-high pressure intensifier. This part developed cracks originated at pressure relieving slots. Cracks were analyzed to get information about their origin and propagation mechani
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::302e9d8df01024d406727e871f28c523
https://doi.org/10.1016/j.engfailanal.2019.01.077
https://doi.org/10.1016/j.engfailanal.2019.01.077
Publikováno v:
International Journal of Mechanical Sciences. :299-309
The Small Punch Test (SPT) is a miniature mechanical characterization test used as an alternative method to obtain a wide selection of mechanical properties (Young's modulus, yield strength, ultimate tensile strength, fracture toughness, etc). These
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::f885475eee3434b11b212fbae1133e3c
https://doi.org/10.1016/j.ijmecsci.2019.02.013
https://doi.org/10.1016/j.ijmecsci.2019.02.013
Publikováno v:
Mechanics of Materials. 169:104295
The tubes and pipes manufacturing industry characterizes the mechanical properties of their products with a wide selection of standards, but most of them are qualitative testing methodologies. To estimate the mechanical properties from a quantitative
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::eb18a1cb0d2803a1286dfcdbcdea8c9f
https://doi.org/10.1016/j.mechmat.2022.104295
https://doi.org/10.1016/j.mechmat.2022.104295
Autor:
Maria-Jose Garcia-Tarrago, Pedro Miguel Bravo Díez, Jose Calaf-Chica, Mónica Preciado Calzada, David Curto-Cárdenas
Publikováno v:
Materials
Volume 13
Issue 23
Materials, Vol 13, Iss 5536, p 5536 (2020)
Volume 13
Issue 23
Materials, Vol 13, Iss 5536, p 5536 (2020)
Cold expansion technology is an extended method used in aeronautics to increase fatigue life of holes and hence extending inspection intervals. During the cold expansion process, a mechanical mandrel is forced to pass along the hole generating compre
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::528f14e5020434c44e89a5be1c987164
https://pubmed.ncbi.nlm.nih.gov/33291822
https://pubmed.ncbi.nlm.nih.gov/33291822
Publikováno v:
Materials
Volume 12
Issue 24
Volume 12
Issue 24
Cold expansion technology is a cold-forming process widely used in aeronautics to extend the fatigue life of riveted and bolted holes. During this process, an oversized mandrel is pushed through the hole in order to yield it and generate compressive
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::fb2c894af1a6b8bc872031b597fac543
http://europepmc.org/articles/PMC6947618
http://europepmc.org/articles/PMC6947618
Publikováno v:
AIP Conference Proceedings.
Small Punch Test (SPT) is a miniature mechanical characterization test used as an alternative method to obtain a wide selection of mechanical properties (modulus of elasticity, yield strength, ultimate tensile strength, fracture toughness, etc). The
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::6877947e86fcb544f605c881065d6ffa
https://doi.org/10.1063/1.5112728
https://doi.org/10.1063/1.5112728
Publikováno v:
Mechanics of Materials. 153:103696
There is a growing interest on the Small Punch Test (SPT) and its many applications in a broad range of industries and sectors. The miniature volume of the SPT specimen eases the mechanical characterization of components and structures when standard
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::15eacb19a4ee5eecca71bcf8c0129878
https://doi.org/10.1016/j.mechmat.2020.103696
https://doi.org/10.1016/j.mechmat.2020.103696
Publikováno v:
Fusion Engineering and Design. 160:112019
The Small Punch Test (SPT) was developed in the 80’s as an alternative miniature test for the characterization of mechanical properties in the nuclear industry. One of the key aspects that materials must fulfill to be used with this miniature test
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::b5b909657067bf03c0fba30589cad672
https://doi.org/10.1016/j.fusengdes.2020.112019
https://doi.org/10.1016/j.fusengdes.2020.112019