Zobrazeno 1 - 10 of 199 pro vyhledávání: '"Jon M. Molina"'
1
Akademický článek
Short fatigue crack growth and retained austenite in steels processed via quenching and partitioning
Autor: Pablo Garcia-Chao, Jon M. Molina-Aldareguia, Bernd M. Linke, Richard G. Thiessen, Ilchat Sabirov
Publikováno v: Materials & Design, Vol 245, Iss , Pp 113228- (2024)
Previous research has consistently found that introducing metastable retained austenite (RA) as a second phase retards the failure of steel under fatigue. However, the reasons for this benefit are not understood. Accordingly, the properties of RA mos
Externí odkaz: https://doaj.org/article/2eb34bd3a4534ce7b860883fbc8e8e2c
Zobrazit plný text záznamu
2
Akademický článek
Fracture resistance of binderless tungsten carbide consolidated by spark plasma sintering and flash sintering
Autor: Isacco Mazo, Miguel A. Monclus, Jon M. Molina-Aldareguia, Vincenzo M. Sglavo
Publikováno v: Open Ceramics, Vol 17, Iss , Pp 100533- (2024)
Binderless tungsten carbide (WC) consolidated by spark plasma sintering (SPS) and electrical resistance flash sintering (ERFS) has emerged as a promising alternative to materials obtained by traditional sintering methods. In this study, we investigat
Externí odkaz: https://doaj.org/article/32b9fbac050a4c9f990828d3fefeca9f
Zobrazit plný text záznamu
3
Akademický článek
Bioinspired antireflective flexible films with optimized mechanical resistance fabricated by roll to roll thermal nanoimprint
Autor: Alejandra Jacobo-Martín, Mario Rueda, Jaime J. Hernández, Iván Navarro-Baena, Miguel A. Monclús, Jon M. Molina-Aldareguia, Isabel Rodríguez
Publikováno v: Scientific Reports, Vol 11, Iss 1, Pp 1-15 (2021)
Abstract This work describes the fabrication process of moth eye antireflective poly (methyl methacrylate) transparent films via roll to roll thermal nanoimprint lithography. The process parameters are investigated and adjusted in order to obtain fro
Externí odkaz: https://doaj.org/article/959f855147ec4f2b8a96e8370388789a
Zobrazit plný text záznamu
5
Akademický článek
New instrumentation and analysis methodology for nano-impact testing
Autor: Mario Rueda-Ruiz, Ben D. Beake, Jon M. Molina-Aldareguia
Publikováno v: Materials & Design, Vol 192, Iss , Pp 108715- (2020)
The nano-impact test is a technique for high strain rate mechanical characterization of materials at the nano/microscale. However, its use has been limited so far due to the lack of appropriate methods to determine the dynamic hardness under impact c
Externí odkaz: https://doaj.org/article/ff2a33802e24484c8603ab0d68c69df1
Zobrazit plný text záznamu
6
Study of the effect of strain rate on the in-plane shear and transverse compression response of a composite ply using computational micromechanics
Autor: Mario Rueda-Ruiz, Miguel Herráez, Federico Sket, Francisco Gálvez, Carlos González, Jon M. Molina-Aldareguia
The use of composite materials for structures subjected to impacts requires a deep understanding about the dynamic behaviour of the material. To this end, a physically-based computational micromechanics simulation tool has been developed to predict f
Externí odkaz: https://explore.openaire.eu/search/publication?articleId=doi_dedup___::af8a2a438f997babd383a435047feee3
Zobrazit plný text záznamu
8
Anisotropy effect of bioinspired ceramic/ceramic composites: Can the platelet orientation enhance the mechanical properties at micro- and submicrometric length scale?
Autor: Hassan Saad, Joan Josep Roa, Sylvain Deville, Jon M. Molina-Aldareguia, Miguel A. Monclús, N. Abando
Publikováno v: Journal of the European Ceramic Society
Journal of the European Ceramic Society, Elsevier, 2020, ⟨10.1016/j.jeurceramsoc.2020.12.039⟩
UPCommons. Portal del coneixement obert de la UPC
Universitat Politècnica de Catalunya (UPC)
In advanced ceramics, improving toughness usually relies on the introduction of a soft metallic or polymeric ductile phase, which decreases the mechanical properties. Some natural materials are strong, stiff and tough due to a combination of mechanis
Externí odkaz: https://explore.openaire.eu/search/publication?articleId=doi_dedup___::b4a66d267f636e9a9650c5d5eeda9634
https://doi.org/10.1016/j.jeurceramsoc.2020.12.039
Zobrazit plný text záznamu
9
Bioinspired antireflective flexible films with optimized mechanical resistance fabricated by roll to roll thermal nanoimprint
Autor: Miguel A. Monclús, Iván Navarro-Baena, Jon M. Molina-Aldareguia, Mario Rueda, Jaime J. Hernández, Alejandra Jacobo-Martín, Isabel Rodriguez
Publikováno v: Scientific Reports, Vol 11, Iss 1, Pp 1-15 (2021)
Repositorio Institucional del Instituto Madrileño de Estudios Avanzados en Nanociencia
instname
Scientific Reports
This work describes the fabrication process of moth eye antireflective poly (methyl methacrylate) transparent films via roll to roll thermal nanoimprint lithography. The process parameters are investigated and adjusted in order to obtain from a singl
Externí odkaz: https://explore.openaire.eu/search/publication?articleId=doi_dedup___::35c564c90aa0b82a55023ed85c2d439d
https://doaj.org/article/959f855147ec4f2b8a96e8370388789a
Zobrazit plný text záznamu

Vyhledávací nástroje:

Upřesnit hledání

Omezení vyhledávání
Plný text Recenzováno Digitální knihovna AV ČR
Zdroje