Zobrazeno 1 - 10
of 28
pro vyhledávání: '"John C. Estill"'
Autor:
John C. Estill, Raul B. Rebak
Publikováno v:
Journal of Pressure Vessel Technology. 129:729-736
Alloy 22 (N06022) has been extensively tested for general and localized corrosion behavior both in the wrought annealed condition and in the as-welded condition. In general, the specimens for laboratory testing are mostly prepared from flat plates of
Publikováno v:
JOM. 57:56-61
Alloy 22 (N06022) is a nickel-based alloy highly resistant to corrosion. In aggressive conditions of high chloride concentration, temperature, and applied potential, alloy 22 may suffer crevice corrosion, a form of localized corrosion. Several electr
Autor:
Gary A. Hust, Kenneth J. King, John C. Estill, Raul B. Rebak, Michael T. Whalen, S. D. Day, Lana L. Wong
Publikováno v:
CORROSION. 60:804-814
Nickel-based Alloy 22 (UNS N06022) is used extensively in aggressive industrial applications, especially due to its resistance to localized corrosion and stress corrosion cracking in high-chloride environments. The purpose of this work was to charact
Publikováno v:
Chemistry of Materials. 5:1645-1650
Cyclic voltammetry has been used to investigate the electrodeposition of the superconducting material, Ba[sub 1[minus]x]K[sub x]BiO[sub 3]. Reactions occurring at a Pt substrate electrode over a wide potential range have been assigned. Evidence has b
Publikováno v:
Volume 7: Operations, Applications, and Components.
In conditions where tight crevices exist in hot chloride containing solutions Alloy 22 may suffer crevice corrosion. The occurrence (or not) of crevice corrosion in a given environment (e.g. salt concentration and temperature), is governed by the val
Publikováno v:
Volume 7: Operations, Applications, and Components.
Alloy 22 (N06022) has been extensively tested for general and localized corrosion behavior both in the wrought and annealed condition and in the as-welded condition. The specimens for testing were mostly prepared from flat plates of material. It was
Publikováno v:
Volume 7: Operations, Applications, and Components.
When metallic plates are welded, residual tensile stresses may develop in the vicinity of the weld seam. Processes such as Low Plasticity Burnishing (LPB) and Laser Shock Peening (LSP) could be applied locally to eliminate the residual stresses produ
Publikováno v:
Volume 7: Operations, Applications, and Components.
The ASTM standard B 575 provides the requirements for the chemical composition of Nickel-Chromium-Molybdenum (Ni-Cr-Mo) alloys such as Alloy 22 (N06022) and Alloy 686 (N06686). The compositions of each element are given in a range. For example, the c
Publikováno v:
Transportation, Storage, and Disposal of Radioactive Materials.
Boron containing stainless steels are used in the nuclear industry for applications such as spent fuel storage, control rods and shielding. It was of interest to compare the corrosion resistance of three borated stainless steels with standard austeni
Autor:
John C. Estill, G. O. Ilevbare, Michael T. Whalen, Kenneth J. Evans, Raul B. Rebak, Kenneth J. King, Gary A. Hust, S. Daniel Day, Lana L. Wong
Publikováno v:
Transportation, Storage, and Disposal of Radioactive Materials.
Alloy 22 (UNS N60622) is a nickel-based alloy, which is extensively used in aggressive industrial applications, especially due to its resistance to localized corrosion and stress corrosion cracking in high chloride environments. The purpose of this w