Zobrazeno 1 - 10
of 27
pro vyhledávání: '"Joel Voyer"'
Publikováno v:
Lubricants, Vol 7, Iss 8, p 67 (2019)
The aim of the present study was firstly to determine the manufacturing feasibility of a specific surface 3D-microtexturing on steel through an ultra-short pulsed laser, and secondly to investigate the tribological properties under 2 different lubric
Externí odkaz:
https://doaj.org/article/77f7304251f740e9b85087a4445a0e51
Publikováno v:
Lubricants, Vol 7, Iss 2, p 17 (2019)
In the present study, PA6 polymers with and without solid lubricant inclusions were investigated against S1100QL steel surfaces that had different surface roughness values—a very high surface roughness (Rz ≈ 40 µm) and a low surface roughness (R
Externí odkaz:
https://doaj.org/article/fc05dc8184a84e97a9f42da98822b1a9
Publikováno v:
Lubricants, Vol 5, Iss 4, p 45 (2017)
It is well known that elastomers usually possess poor dry sliding friction properties due to their highly adhesive character. In order to overcome this problematic behavior in industrial applications, interfacial materials such as oils, greases, coat
Externí odkaz:
https://doaj.org/article/6719afaae29e4682b795c2ab037fd438
The International Thermal Spray Conference is the largest international gathering dedicated entirely to the science and technology of thermal spray. It brings together the principal players from all key disciplines and worldwide industrial sectors—
Publikováno v:
Proceeding of Progress in Plasma Processing of Materials 1997.
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::7c96fbd8513ec169e26cb86325175e8a
https://doi.org/10.1615/itppc-1996.340
https://doi.org/10.1615/itppc-1996.340
Publikováno v:
Solid State Phenomena. 320:103-110
The present case-study was aimed at evaluating and comparing the frictional properties (friction and wear) of alternative concepts for a shaft-bushing component in comparison to the actually used benchmark system. Through the use of a specially desig
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::f3a08136cde32082d10a38e57d1a0ebc
https://doi.org/10.4028/www.scientific.net/ssp.320.103
https://doi.org/10.4028/www.scientific.net/ssp.320.103
Autor:
Florian Ausserer, Georg Vorlaufer, Igor Velkavrh, Stefan Klien, Alexander Abbrederis, Joel Voyer
Publikováno v:
Industrial Lubrication and Tribology. 72:995-1000
Purpose In the cardboard package production process, the cardboard roll and the cardboard bottom are joined in the seaming process. During the process, the cardboard is plastically deformed and damage to the cardboard surface can occur. The purpose o
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::47182013894bfb095473ca3c2230a8f9
https://doi.org/10.1108/ilt-02-2020-0065
https://doi.org/10.1108/ilt-02-2020-0065
Publikováno v:
Frontiers in Mechanical Engineering, Vol 7 (2021)
A surface texture can be subdivided into three categories based on the magnitude of its wavelengths, i.e., macro-geometrical form, waviness, and roughness (from largest to smallest). Together, these components define how a surface will interact with
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::c45bd54d182cb15bcd1fa8ee1f19f6ba
https://doi.org/10.3389/fmech.2021.691485
https://doi.org/10.3389/fmech.2021.691485
Autor:
Leo Hillman, Yu Jiang, Mika Suvanto, Tapani A. Pakkanen, Alexander Diem, Joel Voyer, Kati Mielonen
Publikováno v:
Cold Regions Science and Technology. 163:8-18
The ice friction behavior of various microtextured polymer surfaces was studied with respect to ice temperature and applied load using a customized linear tribometer. Similar micropillar patterns were replicated on polypropylene and two rubber compou
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::dbdeea6475e1fb6934d83df2ee22aa66
https://doi.org/10.1016/j.coldregions.2019.04.002
https://doi.org/10.1016/j.coldregions.2019.04.002
Publikováno v:
Key Engineering Materials. 799:59-64
In the present study, static coefficients of friction of pure and friction modified (FM) polyamide 6 (PA6) polymers against primer-coated steel surfaces were investigated under a series of nominal contact pressures and by considering the influences o
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::e5bfa4d76368e92eb17311566e0846ed
https://doi.org/10.4028/www.scientific.net/kem.799.59
https://doi.org/10.4028/www.scientific.net/kem.799.59