Zobrazeno 1 - 10
of 16
pro vyhledávání: '"Jiuhui Zhao"'
Autor:
Mingru Li, Huan Niu, Kai Shang, Jianyu Lang, Yafang Gao, Bingnan Li, Jiuhui Zhao, Zhen Li, Yang Feng, Shengtao Li
Publikováno v:
High Voltage, Vol 9, Iss 3, Pp 528-536 (2024)
Abstract The unsatisfactory insulating properties of solid–gas interfaces seriously restrict the development of high‐voltage electrical equipment and threaten their power supply stability. Electron‐beam irradiation (EBI) can effectively improve
Externí odkaz:
https://doaj.org/article/c40a78795be1499dbb26656fd5a3c7d1
Autor:
Xieraili Wumener, Yarong Zhang, Zihan Zang, Fen Du, Xiaoxing Ye, Maoqun Zhang, Ming Liu, Jiuhui Zhao, Tao Sun, Ying Liang
Publikováno v:
BMC Pulmonary Medicine, Vol 24, Iss 1, Pp 1-10 (2024)
Abstract Objectives 18F-fluorodeoxyglucose (FDG) PET/CT has been widely used for the differential diagnosis of cancer. Semi-quantitative standardized uptake value (SUV) is known to be affected by multiple factors and may make it difficult to differen
Externí odkaz:
https://doaj.org/article/ae3f217a0ed54ba084681a2aa41057ba
Autor:
Fen Du, Xieraili Wumener, Yarong Zhang, Maoqun Zhang, Jiuhui Zhao, Jinpeng Zhou, Yiluo Li, Bin Huang, Rongliang Wu, Zeheng Xia, Zhiheng Yao, Tao Sun, Ying Liang
Publikováno v:
EJNMMI Physics, Vol 11, Iss 1, Pp 1-16 (2024)
Abstract Purpose This study aimed to evaluate the clinical feasibility of early 30-minute dynamic 2-deoxy-2-[18F]fluoro-D-glucose (18F-FDG) positron emission tomography (PET) scanning protocol for patients with lung lesions in comparison to the stand
Externí odkaz:
https://doaj.org/article/de529f8b641d4b06a426918220398e2c
Publikováno v:
Journal of Materials Research and Technology, Vol 12, Iss , Pp 2348-2367 (2021)
Softening mechanism and microstructure evolution of 2A14 aluminum alloy were studied via isothermal deformation tests under the temperatures range from 573 K to 773 K and strain rates range from 10−3 s−1 to 1 s−1. Microstructures indicated that
Externí odkaz:
https://doaj.org/article/80210eb5fba846cca93d370908a58154
Publikováno v:
Journal of Materials Research and Technology, Vol 9, Iss 4, Pp 8001-8012 (2020)
Evolution of grain structure during isothermal multi-direction forging (MDF) of an Al-Zn-Mg-Cu alloy at 400 °C and 450 °C with strain rates from 10−3 s−1 to 10−5 s−1 was investigated with electron backscattering diffraction (EBSD) and trans
Externí odkaz:
https://doaj.org/article/913d641d13bb43b0ae2ce4ef5ed6475b
Publikováno v:
Metals, Vol 9, Iss 2, p 110 (2019)
Fine-grained (average gain size 3.8 μm) and coarse-grained (average gain size 24.9 μm) Al-Zn-Mg-Cu alloys were subjected to isothermal compression at 10−3 s−1 and temperature ranges from 300 °C to 450 °C. The grain structures after isothermal
Externí odkaz:
https://doaj.org/article/a90216e1168b48d4800000114cdbed22
Publikováno v:
2022 IEEE International Conference on High Voltage Engineering and Applications (ICHVE).
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::48cb45c4e3be922b563c7129063c1896
https://doi.org/10.1109/ichve53725.2022.9961498
https://doi.org/10.1109/ichve53725.2022.9961498
Publikováno v:
Journal of Materials Research and Technology, Vol 12, Iss, Pp 2348-2367 (2021)
Softening mechanism and microstructure evolution of 2A14 aluminum alloy were studied via isothermal deformation tests under the temperatures range from 573 K to 773 K and strain rates range from 10−3 s−1 to 1 s−1. Microstructures indicated that
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::5ea6e11913003de60652402bf01bc329
http://www.sciencedirect.com/science/article/pii/S2238785421003690
http://www.sciencedirect.com/science/article/pii/S2238785421003690
Publikováno v:
Journal of Materials Engineering and Performance. 29:1715-1723
The Al-Zn-Mg-Cu alloy with different sub-grains and recrystallized grains was isothermal forged at 400 °C with strain rate of 10−4 s−1, and the grain structures were examined by electron backscatter diffraction (EBSD). The results showed that th
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::c216d955a0ce67c570d4b8e881070235
https://doi.org/10.1007/s11665-020-04672-6
https://doi.org/10.1007/s11665-020-04672-6
Publikováno v:
Materials Science and Engineering: A. 756:119-128
Multi-direction forging (MDF) at strain rates of 10−3 s−1, 5 × 10−4 s−1 and at temperatures ranging from 300 °C to 400 °C were performed in the Al Zn Mg Cu alloy. The grain refinement effect was controlled by dynamic recrystallization mech
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::294c76beaa5e29025851bcc120bb248f
https://doi.org/10.1016/j.msea.2019.04.033
https://doi.org/10.1016/j.msea.2019.04.033