Zobrazeno 1 - 10
of 50
pro vyhledávání: '"Jitendra S. Tate"'
Publikováno v:
AIP Advances, Vol 14, Iss 2, Pp 025022-025022-5 (2024)
Magnetic Field Assisted Additive Manufacturing (MFAAM), 3D printing in a magnetic field, has the potential to fabricate high magnetic strength anisotropic bonded magnets. Here, 10, 35, and 54 wt% strontium ferrite bonded magnets using polyamide 12 bi
Externí odkaz:
https://doaj.org/article/09e6cf0c93224d99b3526c00a8e258f0
Publikováno v:
AIP Advances, Vol 14, Iss 2, Pp 025306-025306-5 (2024)
Magnetic Field Assisted Additive Manufacturing (MFAAM) enables 3D printing of magnetic materials of various shapes which exhibit a complex anisotropy energy surface containing contributions generated from different origins such as sample, particle, a
Externí odkaz:
https://doaj.org/article/efc34587568b4fa2819bce5ae5949c82
Publikováno v:
AIP Advances, Vol 13, Iss 2, Pp 025024-025024-7 (2023)
To better understand Magnetic Field Assisted Additive Manufacturing (MFAAM) the effect of a magnetic field on the orientation and distribution of magnetic particles in a molten magnetic composite was studied. Vibrating Sample Magnetometer (VSM) measu
Externí odkaz:
https://doaj.org/article/9d2dbacc51ce435ea78f1cc01211eaa2
Publikováno v:
AIP Advances, Vol 12, Iss 9, Pp 095223-095223-9 (2022)
Hard-magnetic 3D-printer filaments made of 40 wt. % SrO(Fe2O3)6/PA12 composites made using a twin-screw extruder are being studied to be used for Magnetic Field Assisted Additive Manufacturing (MFAAM). The time dependence of the magnetic properties a
Externí odkaz:
https://doaj.org/article/5a1c41510ed945008ac1de5c25558605
Autor:
Tanjina Nasreen Ahmed, Maria Camila Belduque, D. C. Binod, Jitendra S. Tate, Wilhelmus J. Geerts
Publikováno v:
AIP Advances, Vol 11, Iss 1, Pp 015048-015048-5 (2021)
The magnetic hysteresis and viscosity of SrO(Fe2O3)6/PA-12 filaments with 5wt% and 26wt% was determined with a biaxial VSM. The hysteresis curves indicate that manufactured samples have a flow induced anisotropy with an easy plane perpendicular to th
Externí odkaz:
https://doaj.org/article/5023fa25be6c47f1bd5520e162cb367b
Publikováno v:
Journal of Composite Materials. 56:685-698
Ablative materials are used as thermal protection systems (TPS) for reentry vehicles and solid rocket motor (SRM) nozzle applications. Phenolic and cyanate ester are the state-of-the-art (SOTA) resin systems used in many of the ablative composites to
Autor:
Jitendra S. Tate, Harish Kallagunta
Publikováno v:
Journal of Composite Materials. 54:2217-2228
The introduction of new type of nanomaterials has provided challenges in a deeper level understanding of mechanical behavior and failure mechanisms of fiber-reinforced composites. In this study, a comparison of low-velocity impact behavior of E-Glass
Nanotechnology safety is the practice of handling engineered nanomaterials in production and manufacturing. Good practice consists of understanding and interpreting Material Safety Data Sheets, behaving safely when working with yet unknown nanomateri
Autor:
Harish Kallagunta, Jitendra S Tate
Publikováno v:
Composites and Advanced Materials. 31:263498332210872
Alumina nanofibers at 0.25wt%, 0.5wt%, 0.75wt%, and 1wt% concentration were used to modify unsaturated polyester resin. Additionally, vinyl silane treated alumina nanofibers were used at the same concentrations and were compared to pristine alumina n
Autor:
Wilhelmus Geerts, Camila Belduque, Jitendra S. Tate, Maggie Yihong Chen, Tanjina N. Ahmed, Sam Zamora, Lauren Henderson
Publikováno v:
Journal of Magnetism and Magnetic Materials. 538:168320
Three different samples of soft magnetic material Proto-pasta, a composite of iron and polylactic acid (PLA), were printed in the presence of a magnetic field and then measured using a vibrating sample magnetometer (VSM) to inspect the effects printi