Zobrazeno 1 - 10
of 17
pro vyhledávání: '"Jiri Klich"'
Autor:
Robert Čep, Martin Fides, Pavol Hvizdoš, Jiri Klich, Frantisek Botko, Dominika Lehocka, Libor Sitek
Publikováno v:
The International Journal of Advanced Manufacturing Technology. 107:2719-2730
The presented article is focused on the evaluation of mechanical properties of stainless steel disintegrated using an ultrasonically modulated pulsating water jet. The experimental procedure was performed using a nozzle with a circular orifice with a
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::7682b64cb9755cc66ff0523a34cabf94
https://doi.org/10.1007/s00170-020-05191-3
https://doi.org/10.1007/s00170-020-05191-3
Autor:
Nenad Gubeljak, Sergej Hloch, Marijana Milković, Jiri Klich, Madhulika Srivastava, Somnath Chattopadhyaya
Publikováno v:
Measurement. 143:81-92
Enhancement of the life of the engineering components is essential from the perspective of its performance, therefore, it is necessary to eliminate the negative effects that attenuates the life of these components. Numerous surface treatment methods
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::4b237012dbf761e9e62cb464a73cdaa4
https://doi.org/10.1016/j.measurement.2019.04.082
https://doi.org/10.1016/j.measurement.2019.04.082
Autor:
Ján Kepič, Zdenek Storkan, Dominika Lehocka, Josef Foldyna, Jiri Klich, Frantisek Botko, Vladimir Simkulet, Michal Hatala, Lucie Krejčí
Publikováno v:
The International Journal of Advanced Manufacturing Technology. 103:1647-1656
Presented article is focused on the comparison of erosion efficiency on the surface treatment of ultrasonically enhanced PWJ (pulsating water jet) on different metal materials surfaces. Surfaces of EN X5CrNi18-10 stainless steel and EN-AW 6060 alumin
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::f82f48049074682f606943b6941d9569
https://doi.org/10.1007/s00170-019-03680-8
https://doi.org/10.1007/s00170-019-03680-8
Publikováno v:
Advances in Manufacturing Engineering and Materials II ISBN: 9783030719555
The article studies the process of drilling with an Injection Abrasive Water Jet (IAWJ). Two different aluminium-based materials with various properties were chosen as test specimens for drilling: (i) very hard and abrasion-resistant alumina ceramics
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::4e0de0973d59abcd6af5411c67817348
https://doi.org/10.1007/978-3-030-71956-2_4
https://doi.org/10.1007/978-3-030-71956-2_4
Publikováno v:
Advances in Manufacturing Engineering and Materials II ISBN: 9783030719555
Nowadays is placed great emphasis on miniaturization and reduction of weight in many industrial sectors. Application of abrasive water jet to produce thin-walled components hide big potential for future applications, due to small lateral force and ab
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::bfd26f86e7536b1e242ac71c39c162a4
https://doi.org/10.1007/978-3-030-71956-2_7
https://doi.org/10.1007/978-3-030-71956-2_7
Publikováno v:
Lecture Notes in Mechanical Engineering ISBN: 9783030534905
High-speed water jet shows a peculiar processing property in cutting submerged objects, but its processing ability decreases quickly with the standoff distance under submerged conditions. For improving the performance of submerged cutting by abrasive
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::17f20cfc7aed1a838ca4652e53f9abca
https://doi.org/10.1007/978-3-030-53491-2_3
https://doi.org/10.1007/978-3-030-53491-2_3
Publikováno v:
Lecture Notes in Mechanical Engineering ISBN: 9783030534905
In the technological process of cutting by means of an abrasive water jet, the so-called piercing is often used when starting the operation of cutting. As the piercing is a time-important part of the process, it is advantageous to reduce the time by
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::4e60bef66cf12acf2f3780a700d62fc2
https://doi.org/10.1007/978-3-030-53491-2_10
https://doi.org/10.1007/978-3-030-53491-2_10
Publikováno v:
Strojniški vestnik
Erosion effects of a pulsating water jet impinging the surface of aluminium alloy samples pre-treated by various techniques (rough and fine milling, planing and rolling) were studied. The influence of the initial surface topography on the final topog
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::d0b31c16192677cb32c41c416323cfd8
https://doi.org/10.5545/sv-jme.2017.4356
https://doi.org/10.5545/sv-jme.2017.4356
Autor:
Petr Hlaváček, Josef Foldyna, Jiri Klich, Lenka Bodnárová, Vladimir Foldyna, Katerina Mamulova Kutlakova, Tomáš Jarolím, Dagmar Klichová
Publikováno v:
Strojniški vestnik - Journal of Mechanical Engineering. 63:583-589
This paper presents first results of the study of the resistance of carbon nanotube concrete composite (CNT/concrete composite) to the action of continuous and pulsating water jets. The experiments oriented at the determination of erosion effects of
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::690decbf3b3a758bc9f754e54db31ef9
https://doi.org/10.5545/sv-jme.2017.4357
https://doi.org/10.5545/sv-jme.2017.4357
Autor:
Vladimíra Schindlerová, Zdenek Storkan, Darina Dupláková, Jiri Klich, Dominika Lehocká, Jan Pitel, Ivana Šajdlerová, Lucie Krejčí
Publikováno v:
Lecture Notes in Mechanical Engineering ISBN: 9783030169428
The presented article deals with the analysis of the maximum erosive effect of ultrasonically pulsed water jet on the surface of austenitic stainless steel EN X5CrNi18-10. One stainless steel sample was evaluated. The sample was disintegrated at a tr
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::0f2d15fa780281820008ba64a341a28f
https://doi.org/10.1007/978-3-030-16943-5_21
https://doi.org/10.1007/978-3-030-16943-5_21