Zobrazeno 1 - 10
of 10
pro vyhledávání: '"Jing-Wei Tong"'
Autor:
Jing-Wei Tong, 童靜薇
102
(3,4-Epoxycyclohexane) methyl-3’4’-epoxycyclohexyl-carboxylate (EEC) is a typical epoxy resin (EP). In Asia, due to the unstable reactive natures of epoxy resin (EP), various thermal hazard and runaway reaction incidents have been occasi
(3,4-Epoxycyclohexane) methyl-3’4’-epoxycyclohexyl-carboxylate (EEC) is a typical epoxy resin (EP). In Asia, due to the unstable reactive natures of epoxy resin (EP), various thermal hazard and runaway reaction incidents have been occasi
Externí odkaz:
http://ndltd.ncl.edu.tw/handle/38356599369256219445
Autor:
Jing-Wei Tong, 童瀞葦
102
Trinitrotoluene (TNT), a common military and industrial explosive, may cause soil and groundwater contamination. Currently, remediation of TNT pollution is an important environment issue. To date, bioremediation is the most environmentally f
Trinitrotoluene (TNT), a common military and industrial explosive, may cause soil and groundwater contamination. Currently, remediation of TNT pollution is an important environment issue. To date, bioremediation is the most environmentally f
Externí odkaz:
http://ndltd.ncl.edu.tw/handle/79711658825455220573
Publikováno v:
Journal of Thermal Analysis and Calorimetry. 116:1445-1452
(3-4-Epoxycyclohexane) methyl-3′-4′-epoxycyclohexyl-carboxylate (EEC) is a typical epoxy resin (EP). In Asia, due to the unstable reactive natures of EP, various thermal hazard and runaway reaction incidents have been occasioned by EP in the manu
Publikováno v:
Advanced Materials Research. :7-10
The results on a numerical and experimental study of graphite/epoxy composite plates [03/903]S are presented. Each specimen was firstly impacted by the low velocity with different energy level. Compression experiment based on carrier electronic speck
Publikováno v:
Advanced Materials Research. :36-39
The study on deformation in impact-damaged graphite-fibre/epoxy stitched composite plates subjected to compressive load is presented. A delaminated cross-ply laminate [03/903]S obtained in low-velocity impact test has been examined using a self-desig
Publikováno v:
Applied Mechanics and Materials. :1262-1265
The experiments focused on thin film buckling under impact load had been completed. The axial impact experiments were done to different films on the PMMA substrate with the drop hammer device, the buckling images of the film surface were recorded aft
Publikováno v:
Advanced Materials Research. :607-610
In this paper, the deformation measurements of impacted and non-impacted composite laminates under compressive loading are taken. [03/903]S orientated cross-ply laminated plates with impact delamination and without delamination are tested using an an
Publikováno v:
Advanced Materials Research. :326-329
The orthotropic mechanical behaviors of weft-knitted flax fiber fabric reinforced polypropylene (PP) composites, which were produced by hot pressing of knit layers composed of a commingled yarn with a flax fiber content of 50vol.%, are investigated i
Publikováno v:
EMEIT
Non-stationary elastohydrodynamic lubrication (EHL) of an involute spur gear is a very complex problem. A full transient EHL solution of an involute spur gear is obtained by utilizing the multigrid method, which takes the variation of equivalent curv
Publikováno v:
2011 International Conference on Electronic & Mechanical Engineering & Information Technology (EMEIT); 2011, p3555-3557, 3p