Zobrazeno 1 - 10
of 17
pro vyhledávání: '"Jian Xin Zou"'
Publikováno v:
Batteries, Vol 9, Iss 4, p 203 (2023)
Large-scale energy storage with high performance and at a reasonable cost are prerequisites for promoting clean energy utilization. With a high theoretical energy density of 1722 Wh·kg−2, high element abundance (e.g., Mg of 23,000 ppm, S of 950 pp
Externí odkaz:
https://doaj.org/article/e48f01cb347448a38c1da1b829e6c444
Autor:
Jian Xin Zou
Selected, peer reviewed papers from the Asia-Pacific Materials Science and Information Technology Conference (APMSIT 2014), December 13-14, 2014, Shanghai, China
Autor:
Jian Xin Zou
Selected, peer reviewed papers from the International Conference on Advances in Materials (ICAM 2014), December 13-14, 2014, Shanghai, China
Publikováno v:
Transactions of Nonferrous Metals Society of China. 22:1817-1823
A Y 2 O 3 particle enhanced Ni/TiC composite coating was fabricated in-situ on a TC4 Ti alloy by laser surface cladding. The phase component, microstructure, composition distribution and properties of the composite layer were investigated. The compos
Publikováno v:
Transactions of Nonferrous Metals Society of China. 20:2192-2197
Laser surface cladding was applied on a TC4 Ti alloy to improve its surface properties. Mixed TiC and Ti powders with a TiC-to-Ti mass ratio of 1:3 were put onto the TC4 Ti alloy and subsequently treated by laser beam. The microstructure and composit
Publikováno v:
Materials Science Forum. :1091-1096
Low energy high current pulsed electron beam (LEHCPEB) is a fairly new technique for surface modifications, including hardening, alloying and formation of metastable phases as well as improvement in wear and corrosion properties. The present contribu
Autor:
Xiao Gang Wang, Shengzhi Hao, Qing Feng Guan, Jian Xin Zou, Ai Min Wu, Ying Qin, Chuang Dong, Zhen Fei Song
Publikováno v:
Materials Science Forum. :2439-2442
Due to the special heating mode of High Current Pulsed Electron Beam (HCPEB) irradiation, intense stresses such as thermoelastic stress, quasi-static stress, and shock wave stress can be generated by a dynamic thermal field. A dynamic thermo-stress i
Publikováno v:
Materials Science Forum. :3673-3676
The simulation of the temperature reveals an ultra high heating/cooling rates in the order of 108~109 K/s and melted layer thickness micrometers in depth. A temperature-induced dynamic thermal stress fields can then generate three principal stress, t
Publikováno v:
Materials Science Forum. :3959-3962
High current pulsed electron beam (HCPEB) is now becoming a promising energetic source for the surface treatment of materials. When the concentrated electron flux transferring its energy into a very thin surface layer within a short pulse time, super
Publikováno v:
Materials Science Forum. :3669-3672
A special phenomenon, anisotropic diffusion is observed during plasma-assisted nitriding of a nickel-based alloy, Inconel 690. The diffusion rate is found to be higher in grains with an orientation close to than in those grains with an orientation cl