Zobrazeno 1 - 10
of 79
pro vyhledávání: '"Jean-Yves RAUCH"'
Publikováno v:
Sensors & Transducers, Vol 18, Iss Special Issue, Pp 84-91 (2013)
For an increasing number of applications, hydrogen represents a solution of the future as it is the most common element in the Earth. However, due to its unstable properties in gas phase, a particular care must be dedicated to control possible gaseou
Externí odkaz:
https://doaj.org/article/7fd0190f649142c0a1bffca4870f7416
Autor:
Meddy VANOTTI, Virginie BLONDEAU-PATISSIER, David RABUS, Jean-Yves RAUCH, Jean-Michel BARBE, Sylvain BALLANDRAS
Publikováno v:
Sensors & Transducers, Vol 14-1, Iss Special Issue, Pp 197-211 (2012)
Progresses in synthetic chemistry methodologies has pushed to develop a large variety of artificial receptors of particular interest for chemical sensor applications. We investigate here the behavior of gas sensors based on surface acoustic wave (SAW
Externí odkaz:
https://doaj.org/article/178c632396c048d1992d969c7650d7a9
Autor:
Charalampos Sakkas, Jean-Marc Cote, Joseph Gavoille, Jean-Yves Rauch, Pierre-Henri Cornuault, Anna Krystianiak, Olivier Heintz, Nicolas Martin
Publikováno v:
Coatings; Volume 12; Issue 11; Pages: 1711
Titanium-boron-nitrogen (Ti-B-N) thin films were deposited by RF reactive magnetron sputtering using a titanium diboride (TiB2) target in an argon + nitrogen mixture. The argon mass flow rate was kept constant, whereas that of nitrogen was pulsed dur
Autor:
Mayra Yucely Beb, Sounkalo Dembélé, Akkiz Bekel, Isabelle Jouffroy-Bapicot, Sébastien Thibaud, Nadine Piat, Olivier Lehmann, Jean-Yves Rauch, Patrick Rougeot, Louis-Marie Lebas, Cyril Langlois, Lucian Roiban, Clémentine Fellah, Gilles Cuny, Karine Masenelli-Varlot
Publikováno v:
Frontiers in Optics + Laser Science 2022 (FIO, LS).
A three-dimensional model enables the development of accurate solutions to have more information about the thickness, texture, and characteristics of small-size samples for education and metrology applications. This project proposes an idea to obtain
Autor:
Olivier Lehmann, Michaël Gauthier, Pierre Lambert, Tibo Pinsard, Youen Vitry, Jean-Yves Rauch
Publikováno v:
IEEE robotics & automation magazine, 27 (3
SCOPUS: ar.j
info:eu-repo/semantics/published
info:eu-repo/semantics/published
Autor:
Jean-Yves Rauch, Etienne Herth
Publikováno v:
International Journal of Precision Engineering and Manufacturing-Green Technology
International Journal of Precision Engineering and Manufacturing-Green Technology, 2021, ⟨10.1007/s40684-021-00381-0⟩
International Journal of Precision Engineering and Manufacturing-Green Technology, 2021, ⟨10.1007/s40684-021-00381-0⟩
Depositions of the dielectric thin-films at low temperatures without greenhouse gas, nitrous oxide (N $$_{2}$$ O) is one of the most critical challenges in modern technologies for microelectronics, optoelectronics, and nanoelectronics. The present st
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::ca6740bc12ae3fcc0166f888c0936e7c
https://hal.archives-ouvertes.fr/hal-03423572
https://hal.archives-ouvertes.fr/hal-03423572
Publikováno v:
Advanced Materials
Advanced Materials, Wiley-VCH Verlag, In press, pp.2103371. ⟨10.1002/adma.202103371⟩
Advanced Materials, Wiley-VCH Verlag, In press, pp.2103371. ⟨10.1002/adma.202103371⟩
4D structures are tridimensional structures with time-varying abilities that provide high versatility, sophisticated designs, and a broad spectrum of actuation and sensing possibilities. The downsizing of these structures below 100 μm opens up excep
Autor:
Charalampos Sakkas, Jean-Marc Cote, Vincent Tissot, Joseph Gavoille, jean-yves Rauch, Nicolas Martin
Publikováno v:
Coatings
Coatings, 2021, 11 (4), pp.438 (13)
HAL
Coatings, 2021, 11 (4), pp.438 (13)
HAL
International audience
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=dedup_wf_001::1807b1705e588a8073ada87e96b8a251
https://hal.archives-ouvertes.fr/hal-03359917
https://hal.archives-ouvertes.fr/hal-03359917
Publikováno v:
E3S Web of Conferences, Vol 313, p 05002 (2021)
19th International Stirling Engine Conference (ISEC 2021)
19th International Stirling Engine Conference (ISEC 2021), Sep 2021, Rome, Italy
E3S Web of Conferences
E3S Web of Conferences, EDP Sciences, 2021, 313, pp.05002. ⟨10.1051/e3sconf/202131305002⟩
19th International Stirling Engine Conference (ISEC 2021)
19th International Stirling Engine Conference (ISEC 2021), Sep 2021, Rome, Italy
E3S Web of Conferences
E3S Web of Conferences, EDP Sciences, 2021, 313, pp.05002. ⟨10.1051/e3sconf/202131305002⟩
A regenerator of a Stirling machine alternately absorbs and releases heat from and to the working fluid which allows to recycle rejected heat during theoretical isochoric processes. This work focuses on a milli-regenerator fabricated with a multiple
Publikováno v:
IEEE Robotics and Automation Letters
IEEE Robotics and Automation Letters, IEEE 2021, 7 (1), pp.88-95. ⟨10.1109/LRA.2021.3118470⟩
IEEE Robotics and Automation Letters, IEEE 2021, 7 (1), pp.88-95. ⟨10.1109/LRA.2021.3118470⟩
Origami structures have a wide range of applications in robotics and have been intensively investigated by researchers in recent years.However, enabling sub-millimeter structures is an open question especially because of the lack of small enough join
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::c0ca2665ae7de12d0a6644421037d3da
https://hal.archives-ouvertes.fr/hal-03414238
https://hal.archives-ouvertes.fr/hal-03414238