Zobrazeno 1 - 10 of 15 pro vyhledávání: '"Jari Juhanko"'
1
Akademický článek
Using Low-Cost Sensors to Develop a High Precision Lifting Controller Device for an Overhead Crane—Insights and Hypotheses from Prototyping a Heavy Industrial Internet Project
Autor: Heikki Sjöman, Juuso Autiosalo, Jari Juhanko, Petri Kuosmanen, Martin Steinert
Publikováno v: Sensors, Vol 18, Iss 10, p 3328 (2018)
The subject of this study was the product development project creating a new innovative proof-of-concept (POC) prototype device that could control a connected industrial overhead crane in order to perform automatic or semi-automatic high precision li
Externí odkaz: https://doaj.org/article/f5357a71790a4fcf89316ca9b76fc784
Zobrazit plný text záznamu
2
Vibration analysis of paper machine’s asymmetric tube roll supported by spherical roller bearings
Autor: Behnam Ghalamchi, Aki Mikkola, Janne Heikkinen, Jussi Sopanen, Jari Juhanko, Petri Kuosmanen, Raine Viitala
Publikováno v: MECHANICAL SYSTEMS AND SIGNAL PROCESSING. 104:688-704
This paper presents a simulation method that is used to study subcritical vibrations of a tube roll in a paper machine. This study employs asymmetric 3D beam elements based on the Timoshenko beam theory. An asymmetric beam model accounts for varying
Externí odkaz: https://explore.openaire.eu/search/publication?articleId=doi_dedup___::82b7c5bc00d3ec981dc9aebd67888fac
https://doi.org/10.1016/j.ymssp.2017.11.030
Zobrazit plný text záznamu
3
Using Low-Cost Sensors to Develop a High Precision Lifting Controller Device for an Overhead Crane—Insights and Hypotheses from Prototyping a Heavy Industrial Internet Project
Autor: Juuso Autiosalo, Martin Steinert, Heikki Sjöman, Jari Juhanko, Petri Kuosmanen
Publikováno v: Sensors
Volume 18
Issue 10
Sensors (Basel, Switzerland)
Sensors, Vol 18, Iss 10, p 3328 (2018)
The subject of this study was the product development project creating a new innovative proof-of-concept (POC) prototype device that could control a connected industrial overhead crane in order to perform automatic or semi-automatic high precision li
Externí odkaz: https://explore.openaire.eu/search/publication?articleId=doi_dedup___::07d9a2670512989512faa2c855332bc5
https://hdl.handle.net/11250/2583126
Zobrazit plný text záznamu
5
Reducing thickness variation of hot rolled steel strip by non-circular back-up roll geometry
Autor: Jari Uusimäki, Petri Kärhä, Thomas Widmaier, Petri Kuosmanen, Jari Juhanko, T. Salmela
Publikováno v: Ironmaking & Steelmaking. 36:133-140
Typically, back-up rolls in hot strip mills are equipped with sliding bearings and it is common to use a key that prevents relative motion between the conical sleeve and the roll shaft. The key groove causes deformation of the sleeve under load. This
Externí odkaz: https://explore.openaire.eu/search/publication?articleId=doi_________::9eea1551db2e8d892427bfc2ffb05824
https://doi.org/10.1179/174328107x203886
Zobrazit plný text záznamu
6
Influence of topography on the running-in of water-lubricated silicon carbide journal bearings
Autor: Peter Andersson, Jari Juhanko, Pekka Lintula, Antti-Pekka Nikkilä
Publikováno v: Andersson, P, Juhanko, J, Nikkilä, A-P & Lintula, P 1996, ' Influence of topography on the running-in of water-lubricated silicon carbide journal bearings ', Wear, vol. 201, no. 1-2, pp. 1-9 . https://doi.org/10.1016/S0043-1648(95)06815-5
The study summarizes an experimental investigation on the running-in of water-lubricated journal bearings and shaft sleeves made of 10 different commercial silicon carbide materials. In each test the sliding surfaces became polished and the sliding c
Externí odkaz: https://explore.openaire.eu/search/publication?articleId=doi_dedup___::90aca97b34181a1fbd919de6ba943465
https://cris.vtt.fi/en/publications/43e084c6-51ec-42f6-88ca-3337ce04e7ed
Zobrazit plný text záznamu
7
Open loops in CAE data management and simulation-based design
Autor: Tanja Saarelainen, Jari Juhanko, Andrea Buda
Publikováno v: International Journal of Product Lifecycle Management. 7:318
Product lifecycle management and simulation-based design have been regarded as necessities for an enterprise’s competitiveness for more than a decade. The aim of this paper is to analyse the current practices and challenges in CAE data management a
Externí odkaz: https://explore.openaire.eu/search/publication?articleId=doi_dedup___::4dec1a69d32c4ad09c7b58cc71b4aa7a
https://doi.org/10.1504/ijplm.2014.066821
Zobrazit plný text záznamu
8
Digital design and manufacturing process comparison for new custom made product family – a case study of a bathroom faucet
Autor: Ari Happonen, Olli Nyrhilä, Thomas Widmaier, Antti Salminen, Jesse Kontio, Petri Kuosmanen, Heidi Piili, Jari Juhanko
Publikováno v: Estonian Journal of Engineering. 19:76
The demand to fulfil a wider range of customer requirements is increasing constantly as well as the need for the customizable production tools. At the same time, the product life cycle as well as the lead time for product development shortens. To res
Externí odkaz: https://explore.openaire.eu/search/publication?articleId=doi_________::61536a20bca321b3ef05a26cbda2d3e2
https://doi.org/10.3176/eng.2013.1.07
Zobrazit plný text záznamu
9
Dynamic geometry of a rotating cylinder with shell thickness variation
Autor: Jari Juhanko, Thomas Widmaier, Esa Porkka, Petri Kuosmanen
Publikováno v: Estonian Journal of Engineering. 16:285
This research is based on observations on paper quality problems. These observed quality problems were found out to be synchronous to the half of the perimeter of the backing roll of the blade coating station, and to be a function of the running spee
Externí odkaz: https://explore.openaire.eu/search/publication?articleId=doi_________::3d10c387fb6aa0006fde784164532aa3
https://doi.org/10.3176/eng.2010.4.04
Zobrazit plný text záznamu

Vyhledávací nástroje:

Upřesnit hledání

Omezení vyhledávání
Plný text Recenzováno Digitální knihovna AV ČR
Zdroje