Zobrazeno 1 - 10
of 48
pro vyhledávání: '"Jan Schjødt-Thomsen"'
Publikováno v:
Fatigue & Fracture of Engineering Materials & Structures. 46:357-360
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::e66224760848c7992cb839dbb80daca0
https://doi.org/10.1111/ffe.13866
https://doi.org/10.1111/ffe.13866
Autor:
Morten Kristiansen, Radoslav Darula, Benny Endelt, Anders Faarbæk Mikkelstrup, Jan Schjødt-Thomsen, Jens Henrik Andreasen, Farhang Farrokhi, Poul Kyvsgaard Hansen, Per Baunegaard With Jensen, Eric Putnam, Nis Hansen
Publikováno v:
Kristiansen, M, Darula, R, Endelt, B, Mikkelstrup, A F, Schjødt-Thomsen, J, Andreasen, J H, Farrokhi, F, Hansen, P K, Baunegaard With Jensen, P, Putnam, E & Hansen, N 2023, ' Improving the Fatigue Life of Large Offshore Foundations ', Marine Structures, vol. 87, 103314 . https://doi.org/10.1016/j.marstruc.2022.103314
Offshore foundations are subject to fatigue due to wind and wave loads during their lifetime. Post-weld treatment is a group of techniques well known to improve the fatigue life. This study investigates how this is applicable for large structures, i.
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::9d44543cb770c2720f81fbb8fecca66e
https://doi.org/10.1016/j.marstruc.2022.103314
https://doi.org/10.1016/j.marstruc.2022.103314
Publikováno v:
Schjødt-Thomsen, J & Andreasen, J H 2018, ' Low cycle fatigue behaviour of welded T-joints in high strength steel ', Engineering Failure Analysis, vol. 93, pp. 38-43 . https://doi.org/10.1016/j.engfailanal.2018.06.026
The present paper investigates the low cycle fatigue of fillet welds made of high strength weldable steel, Weldox S1100. The investigation was inspired by lifting equipment used in the wind turbine industry, where mobility calls for light weight, mak
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::e7356b625fef5823a0bd2dc9fb137e7d
https://vbn.aau.dk/da/publications/5fb57c96-6814-4b59-afbb-6d0c35a6ba60
https://vbn.aau.dk/da/publications/5fb57c96-6814-4b59-afbb-6d0c35a6ba60
Autor:
Eric Faulques, Jens Chr. M. Rauhe, Nataliya Kalashnyk, Jan Schjødt-Thomsen, Ryszard Pyrz, Lars Rosgaard Jensen
Publikováno v:
Kalashnyk, N, Faulques, E, Schjødt-Thomsen, J, Jensen, L R, Rauhe, J C M & Pyrz, R 2017, ' Monitoring self-sensing damage of multiple carbon fiber composites using piezoresistivity ', Synthetic Metals, vol. 224, pp. 56-62 . https://doi.org/10.1016/j.synthmet.2016.12.021
Synthetic Metals
Synthetic Metals, Elsevier, 2017, 224, pp.56-62. ⟨10.1016/j.synthmet.2016.12.021⟩
Synthetic Metals
Synthetic Metals, Elsevier, 2017, 224, pp.56-62. ⟨10.1016/j.synthmet.2016.12.021⟩
The change of electrical resistance in small bundles of multiple carbon fibers and multiple unidirectional carbon fiber/epoxy composites with applied tensile strain has been investigated. The electrical resistance of bundles initially increases relat
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::99e38488fc48d3cfc9048a96e343be10
https://vbn.aau.dk/da/publications/fc3dfbbd-0514-4efe-a167-df95c469d6df
https://vbn.aau.dk/da/publications/fc3dfbbd-0514-4efe-a167-df95c469d6df
Publikováno v:
Zafar, A, Schjødt-Thomsen, J, Sodhi, R, Goacher, R & de Kubber, D 2013, ' Investigation of the ageing effects on phenol-urea-formaldehyde binder and alkanol amine-acid anhydride binder coated mineral fibres ', Polymer Degradation and Stability, vol. 98, no. 1, pp. 339-347 . https://doi.org/10.1016/j.polymdegradstab.2012.09.007
Phenol-Urea-Formaldehyde (PUF) binder coated mineral fibres' mechanical properties have been observed to degrade during ageing at elevated temperatures and humidity, while alkanol amine-acid anhydride binder based mineral fibres exhibited better agei
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::ea1dacdc1cd239da34436b2a61fdec47
https://doi.org/10.1016/j.polymdegradstab.2012.09.007
https://doi.org/10.1016/j.polymdegradstab.2012.09.007
Autor:
Ryszard Pyrz, Lars Rosgaard Jensen, Jens Chr. M. Rauhe, Jan Schjødt-Thomsen, Nataliya Kalashnyk, Eric Faulques
Publikováno v:
Carbon
Carbon, Elsevier, 2016, 109, pp.124-130. ⟨10.1016/j.carbon.2016.07.064⟩
Kalashnyk, N, Faulques, E, Schjødt-Thomsen, J, Jensen, L R, Rauhe, J C M & Pyrz, R 2016, ' Strain sensing in single carbon fiber epoxy composites by simultaneous in-situ Raman and piezoresistance measurements ', Carbon, vol. 109, pp. 124-130 . https://doi.org/10.1016/j.carbon.2016.07.064
Carbon, Elsevier, 2016, 109, pp.124-130. ⟨10.1016/j.carbon.2016.07.064⟩
Kalashnyk, N, Faulques, E, Schjødt-Thomsen, J, Jensen, L R, Rauhe, J C M & Pyrz, R 2016, ' Strain sensing in single carbon fiber epoxy composites by simultaneous in-situ Raman and piezoresistance measurements ', Carbon, vol. 109, pp. 124-130 . https://doi.org/10.1016/j.carbon.2016.07.064
The change of electrical resistance in continuous single carbon fibers and single carbon fiber/epoxy model composites with applied strain has been investigated with a new method combining simultaneous in-situ Raman and electromechanical measurements.
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::c9f7e42ef47108a8ff9866689b324f04
https://hal.archives-ouvertes.fr/hal-01723384
https://hal.archives-ouvertes.fr/hal-01723384
Publikováno v:
Surface and Interface Analysis. 44:811-818
X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry were used to investigate the aging effects on the aminopropylsilane (APS) and quaternary ammonium surfactant-treated mineral fibers. APS-coated mineral fiber sa
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::f9d3827ee81a6d6cf167f694e2809509
https://doi.org/10.1002/sia.4825
https://doi.org/10.1002/sia.4825
Autor:
Jan Schjødt-Thomsen, Ryszard Pyrz
Publikováno v:
Pyrz, R & Schjødt-Thomsen, J 2006, ' Bridging the length-scale gap : short fibre composite material as an example ', Journal of Materials Science, vol. 41, no. 20, pp. 6737-6750 . https://doi.org/10.1007/s10853-006-0212-7
A sequential modelling approach consisting of passing information across length scales is presented to simulate macroscopic behavior of composite materials. The modeling procedure utilizes a proper flow of information from molecular scale to macrosco
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::ae36472c81ef4a2bf9d20568356fb896
https://doi.org/10.1007/s10853-006-0212-7
https://doi.org/10.1007/s10853-006-0212-7
Autor:
Jan Schjødt-Thomsen, Ryszard Pyrz
Publikováno v:
Computational Materials Science. 34:129-139
A 3D stress analysis method based on the theory of eigenstrains and Eshelby’s equivalency principle is established. Multiple inclusion interaction is taken into account, thus the eigenstrains in each inclusion are no longer assumed to be uniform. T
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::58e3b462d948a938402c284483c97263
https://doi.org/10.1016/j.commatsci.2004.12.061
https://doi.org/10.1016/j.commatsci.2004.12.061
Autor:
Ryszard Pyrz, Jan Schjødt-Thomsen
Publikováno v:
Key Engineering Materials. :267-280
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::075e4e45aa3861f58d4e68efef8878e6
https://doi.org/10.4028/www.scientific.net/kem.221-222.267
https://doi.org/10.4028/www.scientific.net/kem.221-222.267