Zobrazeno 1 - 10
of 103
pro vyhledávání: '"Jan Džugan"'
Autor:
Matěj Rott, Ying Li, Martina Koukolíková, Martina Šípová, Pavel Salvetr, Zbyšek Nový, Gerhard Wolf, Jan Džugan
Publikováno v:
Scientific Reports, Vol 13, Iss 1, Pp 1-9 (2023)
Abstract This work deals with the fabrication of one low density steel by mixing AISI S2 tool steel and AlSi10Mg powders using powder-based directed energy deposition (P-DED) technique. Two approaches of mixing powders were compared-continuous mixing
Externí odkaz:
https://doaj.org/article/f58bfd426d2940949cd2ddb04c8959d6
Autor:
Martin Nesládek, Josef Jurenka, Michal Bartošák, Milan Růžička, Maxim Lutovinov, Jan Papuga, Radek Procházka, Jan Džugan, Petr Měšťánek
Publikováno v:
Acta Polytechnica CTU Proceedings, Vol 20, Iss 0, Pp 56-64 (2018)
Increasing demands on the flexibility of steam turbines due to the use of renewable energy sources substantially alters the fatigue strength requirements of components of these devices. Rapid start-ups as well as the increased number of the load cycl
Externí odkaz:
https://doaj.org/article/180b86b6454644bcabefae0660078521
Autor:
Kateřina Mertová, Jan Palán, Gergely Németh, Stanislava Fintová, Michal Duchek, Tomáš Studecký, Josef Veselý, Kristián Máthis, Jan Džugan, Zuzanka Trojanová
Publikováno v:
Crystals, Vol 10, Iss 6, p 422 (2020)
This recent study deals with the optimization of the mechanical performance of Grade 2 and Grade 4 titanium with Conform severe plastic deformation (SPD) processing and subsequent rotary swaging. A comprehensive study of the materials behaviour and c
Externí odkaz:
https://doaj.org/article/f895b4a775e24bdf8efc61c53eefa64b
Autor:
Ondřej Hilšer, Stanislav Rusz, Wojciech Maziarz, Jan Dutkiewicz, Tomasz Tański, Przemysław Snopiński, Jan Džugan
Publikováno v:
Acta Metallurgica Slovaca, Vol 23, Iss 3 (2017)
Equal channel angular pressing (ECAP) method was used for achieving very fine-grained structure and increased mechanical properties of AZ31 magnesium alloy. The experiments were focused on the, in the initial state, hot extruded alloy. ECAP process w
Externí odkaz:
https://doaj.org/article/92c03bc91be546e49a130f15769b4ba2
Publikováno v:
Metals, Vol 9, Iss 10, p 1104 (2019)
This study evaluated residual stresses in heat-treated specimens made of 316L stainless steel using FE analysis and compared them with stresses determined by the contour method. Contour method is usually used just for evaluation of residual stresses
Externí odkaz:
https://doaj.org/article/caa7e8c0cbd14fad94a1661db1f9562b
Autor:
Ondřej Hilšer, Stanislav Rusz, Pavel Szkandera, Lubomír Čížek, Martin Kraus, Jan Džugan, Wojciech Maziarz
Publikováno v:
Metals, Vol 8, Iss 10, p 776 (2018)
Hot extruded (EX) AZ61 magnesium alloy was processed by the twist channel angular pressing (TCAP) method, which combines equal channel angular pressing (ECAP) and twist extrusion (TE) processes and significantly improves the efficiency of the grain r
Externí odkaz:
https://doaj.org/article/e83506cafffb4f97a272e0394989cc10
Publikováno v:
Journal of Materials Science. 57:13695-13723
Autor:
Ying Li, Pavel Podaný, Martina Koukolíková, Jan Džugan, Tomáš Krajňák, Jozef Veselý, Srinivasan Raghavan
Publikováno v:
Materials
Volume 16
Issue 4
Pages: 1377
Volume 16
Issue 4
Pages: 1377
The creep properties of a laser-directed energy deposition (L-DED) technique manufactured Inconel 718 (IN718) was investigated at 650 °C/700 MPa. Microstructure and creep properties of L-DED IN718 samples were tailored by various post heat treatment
Publikováno v:
Materials Science and Engineering: A. 873:144981
Autor:
Dalibor Preisler, Tomáš Krajňák, Miloš Janeček, Jiří Kozlík, Josef Stráský, Michal Brázda, Jan Džugan
Publikováno v:
Materials Letters. 337:133980