Zobrazeno 1 - 10
of 106
pro vyhledávání: '"Jalil Morshedian"'
Publikováno v:
Scientific Reports, Vol 14, Iss 1, Pp 1-16 (2024)
Abstract The aim of this research is to develop a composite antibacterial film for food packaging using low-density polyethylene (LDPE), linear low-density polyethylene (LLDPE), polyethylene-graft-maleic anhydride (PE-g-MA), and incorporating chitosa
Externí odkaz:
https://doaj.org/article/375d9a6901cb4bada79278a7bbfe0979
Publikováno v:
Polyolefins Journal, Vol 9, Iss 2, Pp 73-83 (2022)
Researchers have studied the possibility of various polymer composites for radiation shielding applications. Lightness and non-toxicity of these materials are their significant advantages compared to Pb base traditional and common shields. In this re
Externí odkaz:
https://doaj.org/article/bd20e26d74f34c1881f6e8caabd9a0f2
Publikováno v:
Polyolefins Journal, Vol 6, Iss 1, Pp 75-83 (2019)
In this study, poly carbonate (PC) and poly (ethylene terephthalate) (PET) were reactive melt-blended under two different conditions to produce PC/PET copolymers. For each condition, samples were taken at specified mixing times representative a speci
Externí odkaz:
https://doaj.org/article/fbc599b3825c4f2c9926d3ea90160961
Publikováno v:
علوم و تکنولوژی پلیمر, Vol 31, Iss 1, Pp 43-55 (2018)
Hypothesis: Polymer nanocomposites have found enormous applications owing to superior physical and mechanical properties such as modulus, strength and barrier behaviour, etc. Contrary to polymer microcomposites, polymer nanocomposites benefit from lo
Externí odkaz:
https://doaj.org/article/f399c7dddbc042cf9d43e391b7f1d1e0
Publikováno v:
Journal of Particle Science and Technology, Vol 3, Iss 1, Pp 13-24 (2017)
Shielding radiation from both x-rays and gamma-rays is important for personnel in medical fields e.g. interventional radiology, nuclear power stations, and other inspection facilities where radiation is involved. Lead is known for its effective shiel
Externí odkaz:
https://doaj.org/article/33b6aca67dba45be899184abc921382c
Publikováno v:
Polyolefins Journal, Vol 3, Iss 1, Pp 1-9 (2016)
High density polyethylene (HDPE) films were produced using cast film extrusion process with different draw ratios, ranging from 16.9 to 148.8. Morphology, crystallinty and orientation state of crystalline and amorphous phases of the cast films were i
Externí odkaz:
https://doaj.org/article/f2fccbc73e55473c874ff20eebd4debc
Publikováno v:
Polyolefins Journal, Vol 2, Iss 2, Pp 109-119 (2015)
HDPE monofilaments were obtained using different extruders and drawn by post-extruder equipments. After solidification, drawn and undrawn monofilaments (draw ratio 7:1) were irradiated with 10 MeV electron beams in air at room temperature at 25, 50,
Externí odkaz:
https://doaj.org/article/6ac8852449d64a8fbfaa06258d7373fe
Publikováno v:
تحقیقات علوم چوب و کاغذ ایران, Vol 29, Iss 4, Pp 581-593 (2014)
In this research the influence of using waste Poly Ethylene Terephthalate on the mechanical and rheological properties of wood flour filled PP composites has been studied. PET contents varied from 10-33 wt%. Mechanical properties were characterized b
Externí odkaz:
https://doaj.org/article/f882b181412546439292c849b02f5c9c
Autor:
Farzaneh Alirezaei Hoor, Jalil Morshedian, Shervin Ahmadi, Mohammad Rakhshanfar, Alireza Bahramzadeh
Publikováno v:
Journal of Chemistry, Vol 2015 (2015)
Super tough polyamide 6 was prepared by using SEBS and effect of SEBS-g-MA as a compatibilizer of PA6/SEBS matrix on mechanical properties was investigated. Thus super tough polyamide 6/graphene nanocomposites were produced using graphene nanosheets
Externí odkaz:
https://doaj.org/article/73d253d4cdb64fa5ac2cdd169899d67b
Publikováno v:
ACS Applied Polymer Materials. 5:2917-2930
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::e1f86738039cbb7594d2742b4fb665a6
https://doi.org/10.1021/acsapm.3c00126
https://doi.org/10.1021/acsapm.3c00126