Zobrazeno 1 - 10
of 29
pro vyhledávání: '"Jaka B"'
Publikováno v:
Corrosion and Materials Degradation, Vol 5, Iss 3, Pp 340-349 (2024)
We studied the effect of isothermal annealing (600–750 °C, 1 to 1000 min) on the microstructure and mechanical properties of SAF 2205 duplex stainless steel. Impact toughness was found to be significantly more affected than hardness by annealing.
Externí odkaz:
https://doaj.org/article/335aa9a08e484684a80b70ce2e49172c
Publikováno v:
Heritage, Vol 7, Iss 8, Pp 3919-3931 (2024)
This paper gives an overview of findings, connected with metallurgical activity, at the Pržanj archeological site near Ljubljana, Slovenia. More than 230 kg of slag and other remains connected with early medieval (from the 5th to the 12th century AD
Externí odkaz:
https://doaj.org/article/02d0d2f5ec8d4f019a9b59b46053cf2a
Publikováno v:
Heritage, Vol 6, Iss 6, Pp 4653-4670 (2023)
The castle on Kozlov Rob above Tolmin is one of the most important historical sites in western Slovenia. Over the years, large quantities of finds dating from the late medieval and early modern periods have been recovered from the castle ruins in the
Externí odkaz:
https://doaj.org/article/845ba209789a4e1e96e02173b703567b
Microstructure and Properties Variation of High-Performance Grey Cast Iron via Small Boron Additions
Publikováno v:
Crystals, Vol 14, Iss 1, p 103 (2024)
A study was undertaken to investigate the effects of small boron additions on the solidification and microstructure of hypo-eutectic alloyed grey cast iron. The characteristic temperatures upon crystallisation of the treated metal melt were recorded,
Externí odkaz:
https://doaj.org/article/62d91815e4d6401e9d8b36daee0aec38
Publikováno v:
Crystals, Vol 14, Iss 1, p 26 (2023)
Hot-work tool steels play a crucial role in applications exposed to extreme thermal, mechanical, and chemical stresses and require exceptional properties such as high strength, hardness, wear resistance, and toughness. The latter is crucial to preven
Externí odkaz:
https://doaj.org/article/e7a06f823b6847a6ae0bb0483804e4ef
Publikováno v:
Metals, Vol 13, Iss 11, p 1887 (2023)
This study presents a comprehensive investigation of the formation, composition and behaviour of oxide layers during the high-temperature oxidation of four different steel alloys (16Mo3, 13Cr, T24 and P91) at a uniform temperature of 650 °C. The stu
Externí odkaz:
https://doaj.org/article/cbd5446e99174c8cbdfe164bb8d69a12
Publikováno v:
Metals, Vol 13, Iss 10, p 1759 (2023)
The utilization and advancement of a wide variety of polymer materials have led to the development of corresponding plastic injection mould steels. This study aimed to enhance the properties of the commercially available steel EN X33CrS16 (1.2085), s
Externí odkaz:
https://doaj.org/article/af5bb386b0674cf9924b4c4795a07ec3
Publikováno v:
Advances in Materials Science and Engineering, Vol 2023 (2023)
The present experimental work critically analyses the changes in microstructural orientation and mechanical properties of TIG (tungsten inert gas) welded AISI-304 (SS) plates which have undergone through various heat treatments. The characteristics o
Externí odkaz:
https://doaj.org/article/298c9a41537240b0b14003be43569975
Publikováno v:
Crystals, Vol 13, Iss 7, p 1055 (2023)
Grain size distribution after the completion of a phase transformation was studied through the laboratory-controlled hot-plastic deformation of dual phase 600 (DP 600) steel using a specially prepared asymmetric single-pass hot-rolling wedge test wit
Externí odkaz:
https://doaj.org/article/4e95aa48d8f04e328c3e5b0b057a7c6c
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
K zobrazení výsledku je třeba se přihlásit.