Zobrazeno 1 - 10
of 19
pro vyhledávání: '"Jadwiga Kamińska"'
Publikováno v:
Journal of Ecological Engineering, Vol 21, Iss 1, Pp 160-167 (2020)
Successful casting demands that during pouring of the foundry mould with molten metal the mould cavity suffers no deformation. This, in turn, demands the use of binding materials that can give the base sand adequate strength. The main bonding materia
Externí odkaz:
https://doaj.org/article/23e7766eee3f4b21bbef26ad112d1b61
Publikováno v:
Journal of Ecological Engineering, Vol 20, Iss 9, Pp 285-292 (2019)
The foundry industry in Poland and EU member states is growing steadily. Currently, foundries are facing the problem of increasing requirements, which enforce the production of castings characterized by high dimensional accuracy and surface smoothnes
Externí odkaz:
https://doaj.org/article/0c03b07913804c7187051a48ffa0199d
Publikováno v:
Materials, Vol 15, Iss 14, p 4912 (2022)
The results of studies on the effect that the type of binder and casting technology exert on the microstructure and properties of AlSi7Mg alloy castings are discussed in this paper. Comparative tests were carried out on three casting manufacturing te
Externí odkaz:
https://doaj.org/article/9fe1258b9dbb4b73b9784e02c7c11e7d
Autor:
Jadwiga Kamińska
Publikováno v:
Archives of Foundry Engineering.
Autor:
Jadwiga Kamińska
Publikováno v:
Archives of Foundry Engineering.
Autor:
Sabina Puzio, Jadwiga Kamińska
Publikováno v:
Archives of Foundry Engineering.
Publikováno v:
Archives of Foundry Engineering.
Autor:
Jadwiga Kamińska
Publikováno v:
Archives of Foundry Engineering.
Publikováno v:
Archives of Civil and Mechanical Engineering. 23
Green moulding sands containing special carbonaceous additives, which are the source of lustrous carbon (LC), are discussed in this paper. Five potential lustrous carbon carriers, i.e., two types of hard coal dust (No.1 and No.2), amorphous graphite
Autor:
Jadwiga Kamińska
Publikováno v:
Archives of Foundry Engineering, Vol 13, Iss 1, Pp 69-72 (2013)
Jadwiga Kamińska
Jadwiga Kamińska
Self-hardening moulding sands with water-glass hardened by liquid esters are applied in several foundry plants for making moulds for the production of heavy iron and steel castings. The main good point of this process is a low cost of sands. However,