Zobrazeno 1 - 10
of 47
pro vyhledávání: '"Jack Telesman"'
Publikováno v:
Metallurgical and Materials Transactions A. 49:3838-3853
Cyclic near-threshold fatigue crack growth (FCG) behavior of two disk superalloys was evaluated and was shown to exhibit an unexpected sudden failure mode transition from a mostly transgranular failure mode at higher stress intensity factor ranges to
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::33ae0d0269e1b1b8a022951da87558fa
https://doi.org/10.1007/s11661-018-4685-1
https://doi.org/10.1007/s11661-018-4685-1
Publikováno v:
International Journal of Fatigue. 150:106328
Machining parameters can influence fatigue life by altering residual stresses, cold work and surface roughness. A study was performed to examine the effect of various broaching machining parameters on high temperature fatigue lives of a nickel-based
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::0079f85cf2930cb8a76cce46a423a2f7
https://doi.org/10.1016/j.ijfatigue.2021.106328
https://doi.org/10.1016/j.ijfatigue.2021.106328
Publikováno v:
Materials Science and Engineering: A. 708:336-350
An investigation of high temperature cyclic fatigue crack growth (FCG) threshold behavior of two advanced nickel disk alloys was conducted. The focus of the study was the unusual crossover effect in the near-threshold region of these type of alloys w
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::f1f23101cf219b08f9f85de397243a91
https://doi.org/10.1016/j.msea.2017.10.003
https://doi.org/10.1016/j.msea.2017.10.003
Autor:
Ivan E. Locci, Jack Telesman, J. A. Nesbitt, Robert A. Miller, Tim Gabb, D. Johnson, Richard B. Rogers, B. J. Puleo, Susan L. Draper
Publikováno v:
Journal of Materials Engineering and Performance. 26:5237-5250
Oxidation and corrosion can attack superalloy disk surfaces exposed to increasing operating temperatures in some turbine engine environments. Any potential protective coatings must also be resistant to harmful fatigue cracking during service. The obj
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::7e665f7b7e4078300f3057a4efdbd57c
https://doi.org/10.1007/s11665-017-3005-z
https://doi.org/10.1007/s11665-017-3005-z
Autor:
Tim Gabb, Christopher Kantzos, Peter J. Bonacuse, Jack Telesman, Peter T. Kantzos, Robert L. Barrie
Publikováno v:
International Journal of Fatigue. 142:105953
Crack initiation, crack coalescence and small crack growth behavior were monitored for over 400 seeded inclusions during interrupted low cycle fatigue testing conducted on the P/M Udimet 720 nickel disk alloy at 650 °C. Two types of seeded alumina i
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::398da1dd6998d32af8f9a8bcd2fc55ea
https://doi.org/10.1016/j.ijfatigue.2020.105953
https://doi.org/10.1016/j.ijfatigue.2020.105953
Publikováno v:
International Journal of Fatigue. 87:311-325
A study was performed to determine and model the effect of high temperature dwells on notched low cycle fatigue (NLCF) and notch stress rupture behavior of a fine grain LSHR powder metallurgy (PM) nickel-based superalloy. It was shown that a 90 secon
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::c8dbe24113bde4f166b87fb7a3e69e01
https://doi.org/10.1016/j.ijfatigue.2016.01.024
https://doi.org/10.1016/j.ijfatigue.2016.01.024
Publikováno v:
Materials at High Temperatures. 33:517-527
The fatigue resistance of the hot corrosion pitted ME3 disk superalloy was investigated. Low cycle fatigue specimens were subjected to hot corrosion exposures that produced pits on the gage sections. These specimens were tested at varied temperatures
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::532c27fc4333e7c1d11f56907744d8af
https://doi.org/10.1080/09603409.2016.1179000
https://doi.org/10.1080/09603409.2016.1179000
Publikováno v:
International Journal of Fatigue. 133:105431
A novel, empirically-based damage tolerance life prediction methodology has been developed to model dwell fatigue crack growth (DFCG) behavior in Ni-based disk superalloys. The methodology is based on a new crack driving force parameter, termed Ksrf,
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::57ce96fadde93e0e767e1c975b4fda91
https://doi.org/10.1016/j.ijfatigue.2019.105431
https://doi.org/10.1016/j.ijfatigue.2019.105431
Publikováno v:
International Journal of Fatigue. 33:414-426
Mechanical property requirements vary with location in nickel-based superalloy disks. To maximize the associated mechanical properties, heat treatment methods have been developed for producing tailored microstructures. In this study, a specialized he
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::0954b85afb19ad8bb71499fd56b93bb0
https://doi.org/10.1016/j.ijfatigue.2010.09.022
https://doi.org/10.1016/j.ijfatigue.2010.09.022
Publikováno v:
Journal of Materials Engineering and Performance. 19:77-89
The effects of hot corrosion pits on low-cycle fatigue life and failure modes of the disk superalloy ME3 were investigated. Low-cycle fatigue specimens were subjected to hot corrosion exposures producing pits, then tested at low and high temperatures
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::1ccd5395e759066200304da084761f35
https://doi.org/10.1007/s11665-009-9399-5
https://doi.org/10.1007/s11665-009-9399-5