Zobrazeno 1 - 10
of 48
pro vyhledávání: '"J.F.W. Bell"'
Publikováno v:
NDT International. 13:301-304
A knowledge of the elastic constants of refractory materials is necessary for carrying out stress analysis of high temperature structural design. Together with internal friction such measurements can give useful NDT information. In developing new mat
Publikováno v:
Journal of Sound and Vibration. 47:415-432
The in-plane vibrations of thin disks and narrow thin rings which already have been completely analysed are the two extremes of the annulus configuration. The general case of the annulus has now been analysed and the results confirmed by experiment.
Publikováno v:
Journal of Sound and Vibration. 68:45-58
In many distributed resonators the low order mode frequencies are sufficiently separated to permit satisfactory modelling in terms of only the single mode being used. It can be represented mechanically by mass, stiffness and energy loss by dissipatio
Publikováno v:
Transactions of the IMF. 62:134-138
SummaryThe paper describes an electronic instrument to evaluate the integrity of solids and to test adhesive bonds of specimens vibrating flexurally within the audible frequency range. The principle is to excite vibrations in a sample, interrupt the
Autor:
B.P. Doyle, J.F.W. Bell
Publikováno v:
Ultrasonics. 2:39-42
Experiments have been carried out on the propagation of longitudinal and torsional pulses in smooth and corrugated rods. The pulses used were long compared to the diameter of the rods and the corrugations were small enough to make the resonant freque
Autor:
J.F.W. Bell
Publikováno v:
Ultrasonics. 6:11-14
The solid acoustic thermometer is basically a remote acoustic resonator for temperature sensing. It can employ any of a large number of materials, giving a freedom of choice not possessed by other methods of temperature measurement. The instrument is
Publikováno v:
Ultrasonics. 11:178-181
The presentation of acoustic laws in diagrammatic form has found use in several ways, R12 particularly in determining acoustic quantities from elastic quantities, in choosing materials for line-line matching, and in tracing variations of properties w
Autor:
J.F.W. Bell, J.Y.F. Chen
Publikováno v:
NDT International. 14:325-327
A sonar type pulse-echo system was used to excite in-plane vibration of rectangular and square plates. By examining the end resonance and plate wave mode on rectangular strip, the elastic constants could be calculated precisely. The authors studied t
Autor:
P.J. Kalmarczie, J.F.W. Bell
Publikováno v:
Physics Letters A. 61:91-93
An experimental and theoretical study of end resonances in strips and plates has revealed that, over a wide frequency range, only one resonance exists. The frequency increases by 20% over the range of Poisson's ratio 0.37 (brass) to 0.10 (pyrolytic g
Autor:
J.F.W. Bell
Publikováno v:
Journal of Sound and Vibration. 53:605