Zobrazeno 1 - 10
of 100
pro vyhledávání: '"J.A. Veil"'
Publikováno v:
All Days.
One of the most serious environmental problems facing coastal Louisiana is the loss of wetlands. The oil and gas industry has contributed to erosion of coastal wetlands through extensive dredging of canals for drilling and production and to allow boa
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::4cdd28dea51b7698f2522105c331c27c
https://doi.org/10.2118/61097-ms
https://doi.org/10.2118/61097-ms
Publikováno v:
All Days.
The oil and gas industry has historically used water-based muds (WBMs) and oil-based muds (OBMs) in offshore drilling operations. WBMs are less expensive and are widely used. Both the WBMs and the associated drill cuttings may be discharged from the
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::f152c84036f4c9894bf0b7aae04fa563
https://doi.org/10.2118/52737-ms
https://doi.org/10.2118/52737-ms
Autor:
J.A. Veil
The US Environmental Protection Agency (EPA) conducts a cost-effectiveness (CE) analysis to estimate the cost of complying with each newly proposed set of industrial effluent limitation guidelines (ELGs). CE is defined as the incremental annualized c
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::35a0e1de9ac2c5b62a64024d203c06a6
https://doi.org/10.2172/510302
https://doi.org/10.2172/510302
Autor:
J.A. Veil
In January 1996, the U.S. Environmental Protection Agency (EPA) released a policy statement endorsing wastewater effluent trading in watersheds, hoping to promote additional interest in the subject. The policy describes five types of effluent trades
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::3f06aedc1634d9c495c8d4d69dc33cc2
https://doi.org/10.2172/565318
https://doi.org/10.2172/565318
Autor:
J.A. Veil
The US Environmental Protection Agency (EPA) establishes controls on produced water discharges into US waters through effluent limitations guidelines (ELGs), and general and individual discharge permits. Over the past 20 years, produced water control
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::0d18700edff8cf204153d04e7dc083a7
https://doi.org/10.2172/195634
https://doi.org/10.2172/195634
Autor:
J.A. Veil, C.J. Burke
Publikováno v:
All Days.
1.0 Introduction 1.1 Abstract Efficient drilling technology is essential to meet the needs of the oil industry. Both the challenges of new oil provinces, especially in offshore waters, and the demands for efficient environmental protection have drive
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::b57602e4bd013814014f7a30f54f4629
https://doi.org/10.2118/29737-ms
https://doi.org/10.2118/29737-ms
Autor:
J.A. Veil, C.J. Burke
When drilling exploration and production wells for oil and gas, drillers use specialized drilling fluids, referred to as muds, to help maintain well control and to remove drill cuttings from the hole. Historically, either water-based muds (WBMs) or o
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::a1c0fcd9c577e1684e28971093f2406c
https://doi.org/10.2172/71322
https://doi.org/10.2172/71322
Many power plants discharge large volumes of cooling water. In some cases, the temperature of the discharge exceeds state thermal requirements. Section 316(a) of the Clean Water Act (CWA) allows a thermal discharger to demonstrate that less stringent
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::1ae8c569053c456f4a0262b5d4236a90
https://doi.org/10.2172/10141527
https://doi.org/10.2172/10141527