Zobrazeno 1 - 10
of 15
pro vyhledávání: '"J. W. Dini"'
Publikováno v:
Electrodeposition and Surface Treatment. 2:165-176
The influence of sulfur content on the notch sensitivity of electroformed nickel was determined by Charpy impact tests. Specimens containing greater than 200 ppm sulfur exhibited severe embrittlement and therefore are highly notch sensitive. A modifi
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::336455ca20481f5bb4319bace0a03d55
https://doi.org/10.1016/0300-9416(74)90032-7
https://doi.org/10.1016/0300-9416(74)90032-7
Autor:
W. F. Oberbeck, K. G. Mayhan, D. R. Edwards, J. R. Lopata, J. F. Montle, D. R. Leritz, A. K. Bhattacharyya, S.K. Chaudhuri, Karl Hornyik, G. Karsten, G. Môhling, H. Plitz, G. Giacchetti, C. Sari, C. T. Walker, Hirotaka Furuya, Masumichi Koizumi, William Primak, T. T. Anderson, J. W. Dini, H. R. Johnson, C. W. Schoenfelder, G. Schumacher, E. Elias, Y. Segal, A. Notea, P. K. Sarkar, K. N. Kirthi, A. K. Ganguly, John R. Phillips
Publikováno v:
Nuclear Technology. 28:177-181
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::b244819b8b911737e768e71d4287996a
https://doi.org/10.13182/nt76-a31556
https://doi.org/10.13182/nt76-a31556
Autor:
J. W. Dini
Publikováno v:
International Metallurgical Reviews. 20:29-56
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::831df440c5cc75db84438854b7dce315
https://doi.org/10.1179/imtlr.1975.20.1.29
https://doi.org/10.1179/imtlr.1975.20.1.29
Publikováno v:
Journal of Vacuum Science and Technology. 12:766-769
The influence of sulfur content on notch sensitivity and hardness of electrodeposited nickel was determined. Charpy impact tests showed that deposits containing greater than 170 ppm of S were highly notch sensitive. Hardness was shown to be a direct
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::53cbbc8d3414d2cda4c3f58d1197fe1a
https://doi.org/10.1116/1.568667
https://doi.org/10.1116/1.568667
Publikováno v:
Experimental Mechanics. 16:56-60
Some electroplated metals contain residual stresses which can cause warpage or premature failure of parts plated or electrofomed with these materials. Noticeably absent from the literature are residual-stress data for finished parts. Typically for pl
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::e43955402f95cc578e84a731e28a7a83
https://doi.org/10.1007/bf02328604
https://doi.org/10.1007/bf02328604
Autor:
H.R. Johnson, J. W. Dini
Publikováno v:
Gold Bulletin. 13(1):31-34
In studies of the use of pulsed current (PC) or asymmetric AC in place of DC in electrodeposition, considerable attention has been devoted to the effects of PC upon the widely applied hard gold coatings normally deposited by DC from acid cyanide elec
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::caf85f8c4fb29723db9853de4b786a20
Autor:
J. W. Dini
Publikováno v:
Gold Bulletin. 6(4):99-101
High temperature property data have been obtained for deposits from two different gold plating solutions, a citrate bath and a sulphite bath, while the influence of annealing at temperatures up to 500°C on the room temperature properties of the depo
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::15acbdeb227ac3f303870ee9ce4ca9e3
The behavior of nickel-plated uranium upon exposure to moist nitrogen was evaluated. Plating thicknesses of 0.051 mm (2 mils) were adequate to prevent corrosion. Specimens with thinner coats showed some corrosion and some reduction in mechanical prop
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::502fc5e2e7cf859a5465c14955366b6d
https://doi.org/10.2172/4232355
https://doi.org/10.2172/4232355
Autor:
J. W. Dini, H.R. Johnson
Publikováno v:
Journal of Materials Science. 10:1253-1254
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::9e24316ba55d6eaf7c4915a7e7b5c09a
https://doi.org/10.1007/bf00541414
https://doi.org/10.1007/bf00541414
Autor:
H.R. Johnson, J. W. Dini
Publikováno v:
Review of Scientific Instruments. 46:1706-1707
Flyer plate shock wave tests were used to evaluate the influence of using an intermediate copper electrodeposited coating on A286 stainless steel prior to plating to final thickness with nickel. Neither varying the copper plating solution (cyanide or
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::e4dda18ad53d0db87b00750db367e197
https://doi.org/10.1063/1.1134149
https://doi.org/10.1063/1.1134149