Zobrazeno 1 - 10
of 32
pro vyhledávání: '"J. García-Céspedes"'
Publikováno v:
UPCommons. Portal del coneixement obert de la UPC
Universitat Politècnica de Catalunya (UPC)
Recercat. Dipósit de la Recerca de Catalunya
instname
Universitat Politècnica de Catalunya (UPC)
Recercat. Dipósit de la Recerca de Catalunya
instname
This work focuses on methods to characterise the efficiency losses in existing ground-source heat pump (GSHP) installations under part-load conditions. Efficiency losses were identified and quantified in a GSHP by analysing key parameters measured an
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::48236b76e9e294b3de79515acdbf4be1
https://hdl.handle.net/2117/127435
https://hdl.handle.net/2117/127435
Publikováno v:
Phys. Status Solidi C Curr. Top. Solid State Phys.
Physica Status Solidi (C) Current Topics in Solid State Physics
Physica Status Solidi (C) Current Topics in Solid State Physics
Magnetic properties of carbon nanotubes (CNT) obtained by plasma-enhanced chemical vapour deposition (PECVD) have been studied. The growth of these nanotubes has been activated from Ni catalyst nanoparticles. Samples consist of Ni nanoparticles encap
Publikováno v:
Journal of Nanoscience and Nanotechnology. 10:2646-2649
Spherical carbon coated iron particles of nanometric diameter in the 5-10 nm range have been produced by arc discharge at near-atmospheric pressure conditions (using 5-8 x 10(4) Pa of He). The particles exhibit a crystalline dense iron core with an a
Publikováno v:
Diamond and Related Materials. 18:953-956
Plasma enhanced chemical vapour deposition (PECVD) and injection chemical vapour deposition (CVD) methods have been used to produce superparamagnetic iron nanoparticles (NPs) encapsulated in carbon nanostructures (core@shell). Morphological and struc
Efficient diffusion barrier layers for the catalytic growth of carbon nanotubes on copper substrates
Autor:
William I. Milne, Ian A. Kinloch, Enric Bertran, Esther Pascual, K.B.K. Teo, Sebastien B. Thomasson, J. García-Céspedes
Publikováno v:
Carbon. 47:613-621
We have investigated the growth of carbon nanotube (CNT) films on copper substrates by the catalytic chemical vapour deposition route. Ferrocene was used as the catalyst precursor and toluene was the carbon feedstock. The copper substrates were coate
Publikováno v:
Electrochemistry Communications, Vol 10, Iss 9, Pp 1242-1245 (2008)
We present a methodology to fabricate carbon nanotube based electrodes using plasma enhanced chemical vapour deposition. The metal catalyst nanoparticles used to promote nanotube growth are removed using a water plasma treatment in combination with a
Autor:
M.C. Polo, C. Corbella, J.L. Andújar, Enric Bertran, M. Rubio-Roy, Esther Pascual, J. García-Céspedes
Publikováno v:
HAL
Diamond and Related Materials
Diamond and Related Materials, Elsevier, 2007, 16 (4-7), pp.1286-1290
Diamond and Related Materials
Diamond and Related Materials, Elsevier, 2007, 16 (4-7), pp.1286-1290
Diamond like carbon (DLC) thin films have been deposited at room temperature from a graphite target by asymmetric bipolar pulsed-DC reactive magnetron sputtering. DC bias was applied to the substrate holder between 0 and −300 V. Pulsed-DC power den
Publikováno v:
Diamond and Related Materials
Diamond and Related Materials, Elsevier, 2007, 16 (4-7), pp.1131-1135
HAL
Diamond and Related Materials, Elsevier, 2007, 16 (4-7), pp.1131-1135
HAL
Asymmetric bipolar pulsed-DC plasmas have been recently applied as an industrial solution to the deposition of diamond-like carbon DLC films by plasma enhanced chemical vapour deposition (PECVD) and magnetron sputtering on large areas and with a high
Autor:
C. Corbella, Gerard Oncins, J.L. Andújar, M.C. Polo, Maryory Astrid Gómez, J. García-Céspedes, Enric Bertran, Esther Pascual
Publikováno v:
Diamond and Related Materials. 14:1103-1107
The addition of transition metal (Mo, Nb, Ti, W) atoms within the matrix of diamond-like carbon (DLC) films leads to the improving of their mechanical properties. In this work, we study the effects of the different metal induced structures on the ele
Autor:
M.C. Polo, C. Corbella, Enric Bertran, J.L. Andújar, Esther Pascual, Maryory Astrid Gómez, J. García-Céspedes
Publikováno v:
Diamond and Related Materials. 14:1062-1066
The deposition process and physical properties (mechanical and surface) of diamond-like carbon (DLC) films prepared at room temperature by asymmetric bipolar pulsed-DC methane plasma-enhanced CVD (PECVD) are described in this study. The pulse frequen