Zobrazeno 1 - 10
of 14
pro vyhledávání: '"J. F. Álvarez-Antolín"'
Publikováno v:
Practical Metallography. 56:288-302
This study analyses the causes leading to the failure of a high-voltage cable in regions close to it “mooring” at the end near to one of the high-voltage towers. The horizontal span of the cable between moorings was over 1040 m, with a difference
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::f97f05fccb50806594ad67e7473868f6
https://doi.org/10.3139/147.110558
https://doi.org/10.3139/147.110558
Publikováno v:
Practical Metallography. 55:447-467
The aim of this study was the morphological optimization of graphite by generating knowledge able to determine which metallurgical manufacturing factors have a significant influence on the geometry of the graphite precipitated in spheroidal grey cast
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::c92bab3bbf382b53a54b145cc68287f8
https://doi.org/10.3139/147.110502
https://doi.org/10.3139/147.110502
Publikováno v:
Metals
Volume 8
Issue 10
Scopus
RUO. Repositorio Institucional de la Universidad de Oviedo
instname
Metals, Vol 8, Iss 10, p 739 (2018)
Volume 8
Issue 10
Scopus
RUO. Repositorio Institucional de la Universidad de Oviedo
instname
Metals, Vol 8, Iss 10, p 739 (2018)
The properties of Al-Cu-Mg alloys simultaneously depend on dissolving the maximum amount of Cu and Mg in the solution treatment and on achieving optimal ageing. The aim of this study is to analyze the effect on an Al-Cu4.5-Mg1.5-Si0.75 alloy, manufac
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::92f41043ec46ad0c596bf51db4ee5319
Publikováno v:
Scopus
RUO. Repositorio Institucional de la Universidad de Oviedo
instname
Metals, Vol 8, Iss 5, p 293 (2018)
Metals; Volume 8; Issue 5; Pages: 293
RUO. Repositorio Institucional de la Universidad de Oviedo
instname
Metals, Vol 8, Iss 5, p 293 (2018)
Metals; Volume 8; Issue 5; Pages: 293
The present research was focused on the identification of manufacturing factors that have an active influence on the graphite phase formation in Nihard cast irons inoculated with FeB, constituting the outer layer of duplex work rolls. These rolls are
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::aee65dc4296d32c58756d9bb6128ba4a
http://hdl.handle.net/10651/48670
http://hdl.handle.net/10651/48670
Publikováno v:
Scopus
Metals, Vol 8, Iss 9, p 725 (2018)
Metals
Volume 8
Issue 9
RUO. Repositorio Institucional de la Universidad de Oviedo
instname
Metals, Vol 8, Iss 9, p 725 (2018)
Metals
Volume 8
Issue 9
RUO. Repositorio Institucional de la Universidad de Oviedo
instname
One of the main in-service failure mechanisms of the work-rolls used in hot strip mill finishing stands is surface spalling. The indefinite chill double-poured rolls usually comprise of a peripheral working layer made of crushed Ni-hard cast iron and
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::0d25f835c596e271a27b736d94b471f3
http://hdl.handle.net/10651/49722
http://hdl.handle.net/10651/49722
Publikováno v:
Journal of Materials Processing Technology. 206:202-215
The present research arises from the need to gain knowledge to control the precipitation of interdendritic dispersed graphite in mottled Nihard cast irons used in the outer ring layer of industrial duplex work rolls. Industry desires a volume fractio
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::2fc50faa3c19237edcb2b38a3a80e0ac
https://doi.org/10.1016/j.jmatprotec.2007.12.015
https://doi.org/10.1016/j.jmatprotec.2007.12.015
Publikováno v:
Practical Metallography. 45:182-197
This paper presents a study of the microstructural and mechanical characterization of the GS 35 CrMoV 10 4 alloy employed in the manufacture of sand-cast poleshoes for 4-pole synchronous electric power generators working at a frequency of 60 Hz. In a
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::85fd12ff9a17fd66a80cea316decc246
https://doi.org/10.3139/147.100379
https://doi.org/10.3139/147.100379
Publikováno v:
Practical Metallography. 44:503-522
In the present paper, the results of a fractional design of experiments (DOE) with 16 experiments for 7 factors and resolution IV are presented. The goal was to identify the active roll manufacturing factors that influence roll barrel hardness after
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::28cb8d5fda70da74be1f54d12275b0b9
https://doi.org/10.3139/147.100360
https://doi.org/10.3139/147.100360
Publikováno v:
WOK
RUO. Repositorio Institucional de la Universidad de Oviedo
instname
RUO. Repositorio Institucional de la Universidad de Oviedo
instname
The aim of the present research is to identify the manufacturing factors that exert an active influence on the graphite phase formation in mottled Nihard cast irons constituting the roll shells of duplex work rolls processed by the double pour method
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::b01a15fd9dc9663c7fe41895d4a8a5c3
http://hdl.handle.net/10651/6344
http://hdl.handle.net/10651/6344
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
K zobrazení výsledku je třeba se přihlásit.