Zobrazeno 1 - 10
of 191
pro vyhledávání: '"J. E. A. M. van den Meerakker"'
Publikováno v:
Corrosion Science. 42:1169-1183
The oxidative behaviour of Ni80Fe20 (Permalloy) in an NH4F/HF solution was investigated. The influence of O2 concentration and the effects of short-circuiting Permalloy with a large area Pt or Alsimag electrode on the corrosion were studied. Current
Publikováno v:
Thin Solid Films. 266:152-156
The etching behaviour of sputter-deposited tin-doped indium oxide (ITO) films in 8 M HCl solutions was investigated. The etch rate was mainly dependent on the microcrystallinity of the films. Amorphous ITO dissolved with an extremely high rate, while
Publikováno v:
Thin Solid Films. 266:145-151
Tin-doped indium oxide films deposited by d.c. magnetron sputtering were characterized by electrical resistivity, optical transmission, X-ray diffraction (XRD), transmission electron microscopy and stress measurements. Deposition was performed at low
Publikováno v:
Journal of The Electrochemical Society. 142:2321-2325
The etching process of polycrystalline tin-doped indium oxide (ITO) films in HCl solutions is investigated by kinetic and electrochemical experiments and the patterning characteristics are examined by scanning electron microscopy. The influence of ox
Publikováno v:
Journal of Applied Physics. 74:3282-3288
Tin‐doped indium oxide (ITO) films, prepared by dc magnetron sputtering, were characterized by (photo)electrochemical measurements in aqueous H2SO4 solutions. Wavelength dependent photocurrent measurements were used to determine the optical band ga
Publikováno v:
Journal of The Electrochemical Society. 140:471-475
Tin‐doped indium oxide films, prepared by dc magnetron sputtering, have been investigated with respect to their etching behavior in a large number of acids. The etch rate in acids other than the halogen acids is extremely low. The films dissolve at
Publikováno v:
ChemInform. 23
Tin-doped indium oxide (ITO) layers show severe corrosion in alkaline solutions when they are in electrical contact with Al. This corrosion process is investigated by etching experiments, electrochemical measurements, and analytical techniques. It is
Publikováno v:
Journal of Electroanalytical Chemistry. 333:205-216
One of the most striking aspects of etching Ti + W alloys in aqueous H 2 O 2 solutions is the decrease in etch rate under improved mass transport conditions. This aspect was studied by X-ray photoelectron spectroscopy (XPS) and electrochemical measur
Publikováno v:
Journal of The Electrochemical Society. 139:385-390
Tin-doped indium oxide (ITO) layers show severe corrosion in alkaline solutions when they are in electrical contact with Al. This corrosion process is investigated by etching experiments, electrochemical measurements, and analytical techniques. It is
Publikováno v:
Thin Solid Films. 208:237-242
The etching process of Ti-W alloys in concentrated H 2 O 2 solutions is characterized by analytical and microscopic techniques and kinetic experiments. The influence of the Ti-W composition, the composition of the solution and the process parameters