Zobrazeno 1 - 10
of 305
pro vyhledávání: '"J. Dzuba"'
Thermo-mechanical analysis of uncooled La0.67Sr0.33MnO3 microbolometer made on circular SOI membrane
Autor:
J. Dzuba, Tibor Lalinský, P. Lobotka, Gabriel Vanko, Vladimír Kutiš, Gabriel Gálik, Stefan Chromik, J. Paulech, M. Držík
Publikováno v:
Sensors and Actuators A: Physical. 265:321-328
We report on thermal and mechanical analysis of uncooled antenna-coupled La0.67Sr0.33MnO3 microbolometer made on circular SOI (Silicon On Insulator) membrane with no limitation in its active area (circular membrane with diameter up to 2 500 μm). A s
Autor:
Andrej Vincze, Tibor Lalinský, J. Dzuba, Gabriel Vanko, Oleg Babchenko, Tibor Ižák, Marian Vojs
Publikováno v:
Applied Surface Science. 395:92-97
We report on the investigation of low temperature (300 °C) hydrogen plasma treatment influence on the AlGaN/GaN heterostructures. This issue was raised in the frame of study on processes related to hybrid integration of diamond with GaN-based device
Publikováno v:
Advances in Electrical and Electronic Engineering, Vol 15, Iss 3, Pp 561-568 (2017)
We demonstrate that diaphragms for sensor applications can be fabricated by laser ablation in a~variety of substrates such as ceramics, glass, sapphire or SiC. However, ablation can cause pinholes in membranes made of SiC, Si and metals. Our experime
Publikováno v:
Materials & Design, Vol 106, Iss, Pp 305-312 (2016)
In this study, we present a complex methodology for evaluation of the thermally induced stress in patterned diamond microstructures. The diamond strips (2 mm in width and 0.78 or 2.8 μm in thickness) were selectively grown on AlGaN/GaN heterostructu
Publikováno v:
Microsystem Technologies. 22:1883-1892
AlGaN/GaN-based high electron mobility transistors (HEMTs), Schottky diodes and/or resistors have been presented as sensing devices for mechanical or chemical sensors operating in extreme conditions. Creation of appropriate diaphragms and/or cantilev
Autor:
Vladimír Kutiš, M. Držík, Juraj Paulech, Gabriel Gálik, Gabriel Vanko, J. Dzuba, P. Lobotka, Tibor Lalinský, Stefan Chromik
Publikováno v:
Procedia Engineering. 168:733-736
We report on thermal analysis of uncooled antenna-coupled La 0.67 Sr 0.33 MnO 3 microbolometer made on circular SOI membrane with no limitation in its active area (circular membrane with diameter up to 2 500 μm). A simple method how to investigate t
Publikováno v:
Key Engineering Materials. 605:491-494
In this article we demonstrate the high sensitivity AlGaN/GaN circular HEMT (C-HEMT) hydrogen gas sensor with new gate interfacial Pt/NiO layer. The wide band-gap III-nitride semiconductor heterostructure allows the sensor operation at elevated tempe
Publikováno v:
Key Engineering Materials. 605:404-407
A circular high electron mobility transistor (C-HEMT) prepared on the AlGaN/GaN membrane surface has been investigated and its potential for pressure sensing has been already demonstrated. The key issue in the design process of such heterostructure b
Autor:
Tibor Lalinský, Edmund Dobročka, J. Osvald, J. Dzuba, M. Vallo, Ivan Rýger, Andrej Vincze, Gabriel Vanko
Publikováno v:
Applied Surface Science. 283:160-167
We report on a high temperature forming of iridium oxides (IrO 2 ) gates of circular AlGaN/GaN high electron mobility transistors (C-HEMTs) to be predetermined for high temperature applications. IrO 2 gate interfacial layer is formed by high temperat
Autor:
M. Vallo, Gabriel Vanko, P. Hudek, Johann Zehetner, Tibor Lalinský, P. Choleva, J. Dzuba, Vladimír Kutiš, Ivan Rýger
Publikováno v:
Microelectronic Engineering. 110:260-264
We present a non-conventional bulk micromachining process of SiC substrate directed to fabrication of MEMS sensors based on III-nitrides (III-N) material systems for harsh environment. They consist of AlGaN/GaN/SiC high electron mobility transistors