Zobrazeno 1 - 10
of 26
pro vyhledávání: '"J B, Bessone"'
Publikováno v:
Journal of Applied Electrochemistry. 37:467-471
Gallium electrodeposition onto vitreous carbon was studied in chloride solution using potentiostatic and potentiodynamic techniques. The morphology and composition of the deposits were analysed by SEM/EDX. The effects of solution pH, applied potentia
Autor:
J. B. Bessone
Publikováno v:
Corrosion Science. 48:4243-4256
The presence of Hg at concentration less than 300 ppm in Al base alloys causes their passivation breakdown. On alloys used as sacrificial anodes, it causes a major lowering (>0.3 V) in their operational potential in chloride media. Mercury as trace c
Publikováno v:
Corrosion Science. 47:95-105
Exploratory work on the electrochemical behaviour of the Al-4%Zn alloy in the presence of In3+ in weakly acid chloride and acetic media is reported. It was found that in chloride solutions, active dissolution takes place at very negative potentials (
Autor:
J. B. Bessone, A.G. Muñoz
Publikováno v:
Thin Solid Films. 460:143-149
Surface conditions similar to those found in aluminium alloys of practical use were assessed by cathodic deposition of transitions metals (Ni and Co) from different electrolytes. Fundamental aspects concerning with the growth of anodic oxide films at
Publikováno v:
Thin Solid Films. 429:119-128
Electrochemical and morphological aspects of the first stages of Ni deposition were studied in neutral sulfate solutions by means of voltammetry, potentiostatic steps and AFM techniques. Both of the two deposition mechanisms identified in this medium
Publikováno v:
Corrosion Science. 44:2171-2182
In order to explain the electrochemical behaviour of Al–Zn–In based alloys in chloride media, a commercial Al–Zn–In–Si anode and a ternary alloy, Al–5%Zn–0.02%In prepared in our laboratory, were investigated using potentiodynamic techni
Autor:
Silvana Beatriz Saidman, J. B. Bessone
Publikováno v:
Journal of Electroanalytical Chemistry. 521:87-94
The electrodeposition of polypyrrole films on an aluminium substrate in acid nitric solution has been studied by means of cyclic voltammetry and potential step chronoamperometry methods. The coating appears to be initially deposited at flaws in the p
Publikováno v:
Corrosion Science. 43:1245-1265
The anodic dissolution of Zn and Zn–5%In alloy was investigated in acid chloride and perchlorate solutions by means of polarisation curves and electrochemical impedance spectroscopy. The composition and morphology of surface attack were analysed by
Publikováno v:
Journal of Applied Electrochemistry. 31:839-844
A systematic investigation was carried out by means of cyclic voltammetry, chronoamperometry and chronopotentiometry on 3,6-dimethylthieno[3,2-b]thiophene (DMTT) electropolymerisation on vitreous carbon in acetonitrile (ACN) containing 0.1 M LiClO4.
Publikováno v:
Surface and Interface Analysis. 30:305-308
The different devitrification stages of Fe 69.5 Cu 1 Nb 3 B 9 Si 13.5 Cr 4 (F-Cr4) amorphous alloy were studied by atomic force microscopy (AFM) on samples annealed at 400, 600 and 670°C for different treatment times. The AFM images showed no topogr