Zobrazeno 1 - 10
of 186
pro vyhledávání: '"J Altenkirch"'
Publikováno v:
Metallurgical and Materials Transactions A. 43:2342-2355
A systematic set of single-pass full penetration friction stir bead-on-plate and butt-welds in HSLA-65 steel were produced using a range of different traverse speeds (50 to 500 mm/min) and two tool materials (W-Re and PCBN). Microstructural analysis
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::37b5c3397c232cbdd8fc78eb38485bc2
https://doi.org/10.1007/s11661-012-1110-z
https://doi.org/10.1007/s11661-012-1110-z
Autor:
Th. Kannengiesser, V Kostov, J Altenkirch, Jens Gibmeier, Alexander Wanner, Arne Kromm, Stephen Doyle
Publikováno v:
The Journal of Strain Analysis for Engineering Design. 46:563-579
Solid-state phase transformations and the evolution of thermal and elastic strains in novel low temperature transformation (LTT) weld filler materials in the near surface region are monitored in real time by means of an innovative experimental set-up
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::308b90c67ab334ae7a53e3c45555d38a
https://doi.org/10.1177/0309324711413190
https://doi.org/10.1177/0309324711413190
Publikováno v:
The Journal of Strain Analysis for Engineering Design. 46:651-662
Many alloys undergo complex changes in local chemistry in the vicinity of weldments due to the thermal excursion during welding. The resulting changes in solute concentrations can lead to significant local variations in the unstrained unit cell param
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::17ceb17b3f42c3a373374568e0d12ee7
https://doi.org/10.1177/0959651811414643
https://doi.org/10.1177/0959651811414643
Publikováno v:
Metallurgical and Materials Transactions A. 43:2356-2365
A set of single pass full penetration friction stir bead-on-plate and butt welds in HSLA-65 steel were produced using a range of traverse speeds (50 to 500 mm/min) and two tool materials (W-Re and PCBN). Part I described the influence of process and
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::6b41047113c55a44dfcd187ac5255a15
https://doi.org/10.1007/s11661-011-0643-x
https://doi.org/10.1007/s11661-011-0643-x
Publikováno v:
Powder Diffraction. 24:S31-S36
Weld residual stress (RS) measurements are often undertaken on test-pieces which have been Cut Out from large components, yet it remains unclear to what extent the RSs in test-pieces are representative of those present in the original component. Simi
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::69793d95f32bee26455162dca0ccf275
https://doi.org/10.1154/1.3152580
https://doi.org/10.1154/1.3152580
Publikováno v:
Science and Technology of Welding and Joining. 14:185-192
The authors investigate the efficacy of applying rolling pressure along the weld line in thin butt welds produced using friction stir welding (FSW) as a means of controlling the welding residual stresses. Two cases are examined and in each case, comp
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::cd13663cc728016fa649f1cc744a5b45
https://doi.org/10.1179/136217108x388624
https://doi.org/10.1179/136217108x388624
Autor:
Zironi, Isabella1,2 (AUTHOR) isabella.zironi@unibo.it, Cramer, Tobias1 (AUTHOR), Fuschi, Alessandro1 (AUTHOR), Cioni, Margherita1 (AUTHOR) margherita.cioni3@unibo.it, Guerra, Giada3 (AUTHOR), Giuliani, Giacomo1 (AUTHOR), Calienni, Maria4 (AUTHOR), Caramazza, Laura5 (AUTHOR), Liberti, Micaela5 (AUTHOR), Apollonio, Francesca5 (AUTHOR), Remondini, Daniel1,2 (AUTHOR), Castellani, Gastone6,7 (AUTHOR)
Publikováno v:
Scientific Reports. 11/15/2024, Vol. 14 Issue 1, p1-18. 18p.
Publikováno v:
Metallurgical and Materials Transactions A. 39:3246-3259
The extent to which in-situ global mechanical tensioning (GMT) can be used to modify the residual stress state in friction stir (FS) welds is investigated in this article. Residual stress distributions have been determined by synchrotron X-ray and ne
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::a9e889977b89abf03938f3daf6b6d8aa
https://doi.org/10.1007/s11661-008-9668-1
https://doi.org/10.1007/s11661-008-9668-1
The effect of tensioning and sectioning on residual stresses in aluminium AA7749 friction stir welds
Publikováno v:
Materials Science and Engineering: A. 488:16-24
Using synchrotron X-ray diffraction the residual stress distribution has been measured in a series of AA7449-W51 aluminium friction stir welds that had been tensioned to different loads during welding. By modifying the stress accumulation path, the a
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::d499bb801e87279f7b895f2a550fc3ca
https://doi.org/10.1016/j.msea.2007.10.055
https://doi.org/10.1016/j.msea.2007.10.055
Publikováno v:
Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 584:428-435
In this paper we report on a new robotic arm system for fast, accurate and flexible sample manipulation for stress and texture analysis in geometrically complex engineering components on neutron and synchrotron X-ray diffractometers. A Staeubli seria
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::81115e2aac8706f40b58172a81438ae0
https://doi.org/10.1016/j.nima.2007.10.012
https://doi.org/10.1016/j.nima.2007.10.012