Zobrazeno 1 - 10
of 12
pro vyhledávání: '"János Borszéki"'
Autor:
Renáta Buják, István Varga, Péter Kádár, Tibor Kovács, János Borszéki, István Cserny, Kálmán Varga, János Schunk, Attila Horváth, Lajos Fodor, József Kónya, Dezső Varga, Pál Halmos, László Kövér, Noémi Nagy, József Tóth, Krisztián Radó, Péter Dombovári, Tamás Pintér, János Somlai
Publikováno v:
Electrochimica Acta. 52:2542-2551
The surface contamination by uranium in the primary circuit of PWR type nuclear reactors is a fairly complex problem as (i) different chemical forms (molecular, colloidal and/or disperse) of the uranium atoms can be present in the boric acid coolant,
Publikováno v:
Microchemical Journal. 79:25-28
Fly ash samples of cement works were analysed using slurry nebulization inductively coupled plasma atomic emission spectrometric (ICP-AES). Because of the influence of the experimental factors on the signal intensity, the optimal conditions of the an
Autor:
I. Varga, P. Halmos, Zoltán Németh, János Schunk, R. Szánthó, János Somlai, János Borszéki, Kálmán Varga, P. Tilky
Publikováno v:
Journal of Radioanalytical and Nuclear Chemistry. 254:589-596
During the optimization of the AP-CITROX decontamination technology the effect of the different flow rates of the decontamination solutions on the radioactive contamination and corrosion state of stainless steel tube samples originating from steam ge
Publikováno v:
Microchemical Journal. 55:33-43
A study of emission spectra is presented that investigates the capabilities and the limitations of a multicomponent evaluation method, Kalman filtering, in ICP-OES. Using computer simulation the possible sources of error in concentration estimation w
Publikováno v:
Talanta. 41:1089-1093
Pressurized sample preparation devices (High Pressure Asher, Pressurized Microwave Digestion system, compared with a PTFE decomposition vessel) were used to dissolve certified metal alloy samples (steel, copper) for ICP analysis. Based on the results
Publikováno v:
Microchemical Journal. 46:320-326
Composition of bauxite samples was determined by ICP-AES. Twelve trace and two matrix elements are investigated: Ba, Cr, Cu, La, Mn, Mg, Sr, Ti, V, W, Y, and Zn and Al and Fe, respectively. Three types of evaluation methods are employed and the resul
Publikováno v:
Mikrochimica Acta. 108:157-161
A quick sample preparation method was used for the determination of sulphur and trace metals in oil and oily products by the ICP with a minitorch. Stable aqueous emulsions of oils and oil products were made by using two kinds of emulsifiers (one with
Autor:
K. É Makó, János Borszéki, Kálmán Varga, P. Halmos, Zoltán Németh, Zoltán Homonnay, Péter Tilky, Ernő Kuzmann, János Somlai, János Schunk, I. Varga, D. Oravetz, Krisztián Radó
Publikováno v:
Corrosion Issues in Light Water Reactors ISBN: 9781420060010
Heat exchanger tubes provided by Paks NPP Ltd. were investigated in a pilot -plant circulation system in order to obtain findings on the efficiency of oxide layer removal, as well as on the corrosion and solution chemical effects of a version of the
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::6819a1d717a4870a45426e92104dc5cd
https://doi.org/10.1533/9781845693466.4.316
https://doi.org/10.1533/9781845693466.4.316
Publikováno v:
Talanta. 69(3)
The element content of low and high sulfur containing diesel fuels was measured by different analytical methods: energy-dispersive X-ray fluorescent (EDXRF) and inductively coupled plasma atomic emission (ICP-OES) spectroscopy methods. Then results w
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
K zobrazení výsledku je třeba se přihlásit.