Zobrazeno 1 - 10
of 18
pro vyhledávání: '"Ivan Dehtiarov"'
Autor:
Vitalii Kolesnyk, Marcel Kuruc, Ivan Dehtiarov, Anna Neshta, Serhii Avramenko, Vitalii Kononovych, Oksana Dynnyk, Andrii Dovhopolov, Serhii Lemekh, Roman Titskyi
Publikováno v:
Machines, Vol 12, Iss 6, p 405 (2024)
In the conditions of the increase in the range of products in the automobile and aircraft industry, there is a tendency to increase the scope of application of flexible fixtures. Thus, in the current article, it was proposed to consider a new concept
Externí odkaz:
https://doaj.org/article/7b41af5b56d9418295b08e7d7169a79f
Autor:
Jozef Peterka, Marcel Kuruc, Vitalii Kolesnyk, Ivan Dehtiarov, Jana Moravcikova, Tomas Vopat, Peter Pokorny, Frantisek Jurina, Vladimir Simna
Publikováno v:
Machines, Vol 11, Iss 10, p 946 (2023)
The work is new due to the type of process used—ultrasonic precision machining—to determine the possible effect of spindle heating (long-term machining) on the precision of the flat surface. It was carried out on a precise ultrasonic machining ma
Externí odkaz:
https://doaj.org/article/9c55c19ae57244509eba2e0c62003d22
Autor:
Vitalii Ivanov, František Botko, Ivan Dehtiarov, Marek Kočiško, Artem Evtuhov, Ivan Pavlenko, Justyna Trojanowska
Publikováno v:
Machines, Vol 10, Iss 7, p 493 (2022)
The rapid development of manufacturing in recent years has led to a significant expansion of the technological capabilities of modern metal-cutting equipment. Therefore, the modern approach to intensifying production requires an advanced fixture desi
Externí odkaz:
https://doaj.org/article/0ec3bb3342d749058d4982fc91460697
This open access book offers a guide to core principles and practices of manufacturing engineering. It covers the design of, together with technological and measurement issues for, technical systems. Locating charts and setup schemes describing diffe
Autor:
Ivan Dehtiarov, Illia Kosov
Publikováno v:
Technical Sciences and Technologies. :15-26
The use of modern machining centers with wide technological capabilities and the active development of productions with a small-scale form of organization necessitates an increase in the efficiency of fixtures capable of ensuring sufficient accuracy
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::4fb8625dcff2c90c3ea607d43351fd56
https://doi.org/10.25140/2411-5363-2022-3(29)-15-26
https://doi.org/10.25140/2411-5363-2022-3(29)-15-26
Publikováno v:
Bulletin of the National Technical University «KhPI» Series: New solutions in modern technologies. :24-35
The article analyzes the causes of the situation with the appearance of manufacturing errors and the lack of the necessary technical requirements to perform a pin conical joint his intended purpose. The analysis was performed based on geometric const
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::ff05efb71d6a9913954f3cb2862054bb
https://doi.org/10.20998/2413-4295.2021.04.04
https://doi.org/10.20998/2413-4295.2021.04.04
Autor:
Ivan Dehtiarov, Anna Neshta, Mykola Samardak, Vitalii Kononovych, Pavlo Kushnirov, Vadim Baha, Yaroslav Klok
Publikováno v:
TECHNICAL SCIENCES AND TECHNOLOGIES. :26-37
На основі геометричного аналізу області контакту штифтового конічного з’єднання встановлено параметри, щовпливаютьнатипконтактуотв
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::259888a74f5b949e46d5b60dfaa46780
https://doi.org/10.25140/2411-5363-2021-3(25)-26-37
https://doi.org/10.25140/2411-5363-2021-3(25)-26-37
Publikováno v:
New Technologies, Development and Application IV ISBN: 9783030752743
Assurance of accuracy for machining parts and their work’s reliability is achieved using fixtures with the required accuracy of the locating and the workpiece reliable fixing. The expansion of state-of-the-art metal-cutting equipment’s technologi
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::a3ee3aacccea25039d2d9ed8ae951b1d
https://doi.org/10.1007/978-3-030-75275-0_17
https://doi.org/10.1007/978-3-030-75275-0_17
Publikováno v:
Вісник Національного технічного університету «ХПІ». Серія: Нові рішення у сучасних технологіях; № 1(3) (2020): Вісник НТУ «ХПІ»: Серія "Нові рішення у сучасних технологіях"; 9-18
Вестник Национального Технического Университета "ХПИ" Серия Новые решения в современных технологиях; № 1(3) (2020): Вестник НТУ "ХПИ": Серия "Новые решения в современных технологиях"; 9-18
Bulletin of the National Technical University «KhPI» Series: New solutions in modern technologies; № 1(3) (2020): NTU "KhPI" Bulletin: Series "New Solutions in Modern Technologies"; 9-18
Вестник Национального Технического Университета "ХПИ" Серия Новые решения в современных технологиях; № 1(3) (2020): Вестник НТУ "ХПИ": Серия "Новые решения в современных технологиях"; 9-18
Bulletin of the National Technical University «KhPI» Series: New solutions in modern technologies; № 1(3) (2020): NTU "KhPI" Bulletin: Series "New Solutions in Modern Technologies"; 9-18
Анализируется проблема подготовки специалистов заведениями высшего образования в области проектирования и изготовления насосного об
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::933df2413acf331a76fe80c8b2111b2c
http://vestnik2079-5459.khpi.edu.ua/article/view/2413-4295.2020.03.02
http://vestnik2079-5459.khpi.edu.ua/article/view/2413-4295.2020.03.02
The chapter is devoted to the solving of the problem of increasing the efficiency of lever-type parts machining due to the introduction of flexible fixtures ensuring multi-axis machining. The relationship between the design and technological paramete
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::b0f17cc1779c22705ddb7fa8ef626d3a
https://doi.org/10.4018/978-1-7998-2725-2.ch016
https://doi.org/10.4018/978-1-7998-2725-2.ch016