Zobrazeno 1 - 10
of 3 837
pro vyhledávání: '"Involute"'
Publikováno v:
International Journal of Technology, Vol 15, Iss 3, Pp 665-676 (2024)
Gears with the involute profile are assumed to be rigid and good at producing mating gear. They are also deformable and deflectable, indicating additional space is required to avoid interference from the unpredictable shaft, misalignment, and dyna
Externí odkaz:
https://doaj.org/article/20599868625143cb8d13428e030898d7
Publikováno v:
Jixie chuandong, Vol 48, Pp 18-26 (2024)
Asymmetric gears are a new type of involute gears with different pressure angles on each side of a gear tooth. Gear tooth profile parameters have a great influence on the performance of a gear pair, such as its tooth profile shape, motion characteris
Externí odkaz:
https://doaj.org/article/ddc8c8816dcb4292999c6e4391bfc698
Publikováno v:
Metrology and Measurement Systems, Vol vol. 30, Iss No 4, Pp 655-673 (2023)
Gear involute artifact (GIA) is a kind of calibration standard used for traceability of involute metrology. To machine GIAs with sub-micron profile form deviations, the effect on the involute profile deviations caused by the geometric deviations and
Externí odkaz:
https://doaj.org/article/36d1c7caef8a4092a7899e39a00219a1
Publikováno v:
Chinese Journal of Mechanical Engineering, Vol 36, Iss 1, Pp 1-19 (2023)
Abstract Legged robots use isolated footholds to support, which have the merit of good terrain trafficability but lack speed ability. In contrast, wheeled robots have the advantages of high speed and efficiency but only run on flat roads. To improve
Externí odkaz:
https://doaj.org/article/90c5c6d11da54629ab709c915c397f37
Publikováno v:
Jixie chuandong, Vol 47, Pp 80-85 (2023)
According to the parameters and geometric dimensions of the gear, the parametric equations of the transition curve and involute line of the root cutting gear are established based on the principle of machining the gear with the generating method, the
Externí odkaz:
https://doaj.org/article/ac58728f690e4a1487e32eabdbf489ca
Publikováno v:
Shanghai Jiaotong Daxue xuebao, Vol 57, Iss 8, Pp 1046-1054 (2023)
Considering the problems that quantitative analysis and optimization of the geometrical model of scroll compressor created from involute of circle with variable radii are incomplete, the changing trend of the working chamber volume from the beginning
Externí odkaz:
https://doaj.org/article/aca45d811bdc49519657c98b5a901de3
Publikováno v:
Jixie chuandong, Vol 47, Pp 7-11 (2023)
Involute splines are widely used in the transmission system of special vehicles. At present, the spline pair is regarded as rigid connection, and the interface contact state of spline pairs directly affects the characteristics of the transmission sys
Externí odkaz:
https://doaj.org/article/51b32d017a774b0a88bb8fbc7989fb8a
Publikováno v:
AIMS Mathematics, Vol 8, Iss 8, Pp 18435-18454 (2023)
In this paper, we aim to investigate the equiform differential geometric properties of the evolute and involute frontal curves in the hyperbolic and de Sitter planes. We inspect the relevance between evolute and involute frontal curves that relate to
Externí odkaz:
https://doaj.org/article/a3e9f52b44fd4c18bebf61cd8bc03bd7
Autor:
Noritsugu MAEDA
Publikováno v:
Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol 18, Iss 1, Pp JAMDSM0006-JAMDSM0006 (2024)
The purpose of this study was to simplify the design of the tooth surface of face gear and to clarify the optimization method of the specification setting. Face gears have long been used in fishing spinning reels as a speed-increasing gear. Recently,
Externí odkaz:
https://doaj.org/article/aa57aea71d2f41b5bec9eb642984f93d
Publikováno v:
Results in Engineering, Vol 20, Iss , Pp 101405- (2023)
The symmetrical oil suction and discharge chambers and the reversing rotation condition of bidirectional involute internal gear pumps result in low oil absorption capacity and flow pulsation due to cavitation. However, efforts to address these issues
Externí odkaz:
https://doaj.org/article/78793356db2d4bd298822e56c5c25325