Zobrazeno 1 - 10
of 1 973
pro vyhledávání: '"Interference-fit"'
Publikováno v:
Taiyuan Ligong Daxue xuebao, Vol 55, Iss 4, Pp 619-628 (2024)
Purposes The stress on the metro wheel is complicated, which is not only influenced by the wheel-rail coupling force and the contact pressure induced by the axle-wheel interference fit, but also by the thermal load generated during braking. Methods I
Externí odkaz:
https://doaj.org/article/72d119b2278b4408b408586057ed3ee9
Publikováno v:
Eng, Vol 5, Iss 3, Pp 1155-1172 (2024)
Drive systems are an important part of general mechanical engineering, automotive engineering, and various other fields, with shaft–hub connections being an important part of such systems. Decisive aspects in the development of such systems today a
Externí odkaz:
https://doaj.org/article/dee2c54cdb894b0899617b099d3b78fe
Publikováno v:
Advances in Bridge Engineering, Vol 5, Iss 1, Pp 1-20 (2024)
Abstract In recent years, high-strength bolts with friction-type joints have been lengthened to withstand increased traffic load. However, with increase in the joint length, the force able to be resisted by bolted joints has decreased owing to uneven
Externí odkaz:
https://doaj.org/article/43507a3ab64b4f25abacecb54e9aaeff
Publikováno v:
Zhongguo Jianchuan Yanjiu, Vol 18, Iss 5, Pp 40-49 (2023)
Objective Aiming at the problem that the assembly quality of interference fit components is difficult to control, a method for monitoring the assembly quality of such components based on digital twin technology is proposed.Methods Combined with digit
Externí odkaz:
https://doaj.org/article/8ecf831c868942c79cfdef6f0b4a51ee
Publikováno v:
Lubricants, Vol 12, Iss 9, p 327 (2024)
Fretting wear is a phenomenon occurring in many engineering objects, including push fit connections. In view of a large number of factors conducive to wear development, it is difficult to describe the mechanism of wear initiation and development. The
Externí odkaz:
https://doaj.org/article/b6dea5610064416dae5bc82b0704df4f
Publikováno v:
Aerospace, Vol 11, Iss 7, p 552 (2024)
The residual stress field induced by interference-fit riveting in aircraft panel structures significantly affects the fatigue performance around the rivet holes. Common residual stress analytical models often overlook the non-uniformity of interferen
Externí odkaz:
https://doaj.org/article/427644bbcca04f2e9cee80b761b21a9e
Publikováno v:
Вестник Научно-исследовательского института железнодорожного транспорта, Vol 82, Iss 3, Pp 257-264 (2023)
Introduction. This article examines the temperature of separation of a cylindrical part from the axis and its dependence on the interference and induction heating power based on theoretical calculations and experiments.Materials and methods. The calc
Externí odkaz:
https://doaj.org/article/a9bcc79891564a8b902d02e7930ac7c6
Autor:
Anyang Wang, Zhongqi Wang, Menglin Zhao, Yang Zhao, Xingchen Men, Zhengping Chang, Yonggang Kang
Publikováno v:
Polymer Testing, Vol 130, Iss , Pp 108298- (2024)
By experimentation, this study investigated interference-fit effects on the bearing failure of thin-ply composite countersunk single-lap joints. A comparative study of the mechanical behaviour and strengthening of the bolt-hole wall during the assemb
Externí odkaz:
https://doaj.org/article/be83dda078814d4cb6139da55f24e1a9
Experimental Study on the Reduction Effect of Pit Texture on Disassembly Damage for Interference Fit
Publikováno v:
Chinese Journal of Mechanical Engineering, Vol 36, Iss 1, Pp 1-12 (2023)
Abstract After remanufacturing disassembly, several kinds of friction damages can be found on the mating surface of interference fit. These damages should be repaired and the cost is closely related to the severity of damages. Inspired by the excelle
Externí odkaz:
https://doaj.org/article/92d260c1467e428aa8b5246fbef41b52
Publikováno v:
Engineering Science and Technology, an International Journal, Vol 46, Iss , Pp 101504- (2023)
This paper aims to study the crashworthiness of shrink tubes for rail vehicles under axial impact loading. A theoretical model of shrink tube for platform force prediction under interference fit conditions was proposed. The trolley crash test was use
Externí odkaz:
https://doaj.org/article/aba20c3f61a2465384b01d7cb97da495