Zobrazeno 1 - 10
of 43
pro vyhledávání: '"Iban Vicario"'
Autor:
J.J. Trujillo-Tadeo, Gurutze Arruebarrena, H.J. Dorantes-Rosales, Yoana Bilbao, Iban Vicario, Teresa Guraya, Iñaki Hurtado
Publikováno v:
Journal of Materials Research and Technology, Vol 27, Iss , Pp 3751-3760 (2023)
This paper presents a novel multicomponent alloy Al58Zn28Mg6Si8, with a density of 3.46 g/cm3, which incorporates concepts from high entropy alloys. The optimum alloy composition was determined using the CALPHAD approach and binary and ternary diagra
Externí odkaz:
https://doaj.org/article/1c0e239490884fd38cb4c31116e8225c
Publikováno v:
Journal of Materials Research and Technology, Vol 8, Iss 1, Pp 795-803 (2019)
Guided by CALPHAD modeling, low-density and multiphase three novel High Entropy Alloys (HEAs), Al40Cu15Cr15Fe15Si15, Al65Cu5Cr5Si15Mn5Ti5 and Al60Cu10Fe10Cr5Mn5Ni5Mg5 were produced by large scale vacuum die casting. A mixture of simple and complex ph
Externí odkaz:
https://doaj.org/article/00130ad4606c442691862146f1400bed
Autor:
Yoana Bilbao, Juan José Trujillo, Iban Vicario, Gurutze Arruebarrena, Iñaki Hurtado, Teresa Guraya
Publikováno v:
Materials, Vol 15, Iss 14, p 5056 (2022)
Newly designed multicomponent light alloys are giving rise to non-conventional microstructures that need to be thoroughly studied before determining their potential applications. In this study, the novel Al58Zn28Si8Mg6 alloy, previously studied with
Externí odkaz:
https://doaj.org/article/56dc1fcc5cfb467f9619b8cea23d7a22
Autor:
Jon Mikel Sanchez, Alejandro Pascual, Iban Vicario, Joseba Albizuri, Teresa Guraya, Haize Galarraga
Publikováno v:
Metals, Vol 11, Iss 12, p 1944 (2021)
In this work, three novel complex concentrated aluminum alloys were developed. To investigate the unexplored region of the multicomponent phase diagrams, thermo-physical parameters and the CALPHAD method were used to understand the phase formation of
Externí odkaz:
https://doaj.org/article/799df0f625da44859ebdfe1407dfd1e1
Publikováno v:
Applied Sciences, Vol 12, Iss 1, p 237 (2021)
The aim of this work is to determine the Solid Fraction (SF) at the rigidity point (FRP) by applying advanced thermal analysis techniques. The variation of the FRP value is important to explain the solidification behavior and the presence or absence
Externí odkaz:
https://doaj.org/article/80279bb469c84fc7ab143a928a2aee09
Publikováno v:
Applied Sciences, Vol 10, Iss 7, p 2472 (2020)
This work aims to calculate the rigidity point temperature of aluminum alloys by three new methods and compare them with currently employed methods. The influence of major and minor alloying elements over the rigidity point temperature is also discus
Externí odkaz:
https://doaj.org/article/5d5f9737b623447b8ec3dbe70a2cdf16
Publikováno v:
Metals, Vol 5, Iss 3, Pp 1387-1396 (2015)
Al-Ti-B master alloys are widely used in the aluminum industry as grain refiners for the control of the microstructure of the aluminum alloys. The SHS (self-propagating high-temperature synthesis) is an ex situ method that uses exothermic reactions t
Externí odkaz:
https://doaj.org/article/7d11431e9ac64917a52ac68baafd8bce
Publikováno v:
Applied Sciences, Vol 8, Iss 8, p 1236 (2018)
The aim of this work is to give an overview of existing methods and to introduce three new methods for the determination of the Dendrite Coherency Point (DCP) for AlSi10Mg alloys, as well as to compare the acquired values of DCP based on a thermal an
Externí odkaz:
https://doaj.org/article/41fe14f635284998a3147105afbaa485
Autor:
Jon Mikel Sanchez, Iban Vicario, Joseba Albizuri, Teresa Guraya, Natalia E. Koval, Jose Carlos Garcia
Publikováno v:
Metals, Vol 8, Iss 3, p 167 (2018)
The aim of this work is to study the microstructure of four high entropy alloys (HEAs) produced by large scale vacuum die casting. Al40Cu15Mn5Ni5Si20Zn15, Al45Cu15Mn5Fe5Si5Ti5Zn20, Al35Cu5Fe5Mn5Si30V10Zr10, and Al50Ca5Cu5Ni10Si20Ti10 alloys formed a
Externí odkaz:
https://doaj.org/article/226964cec8f14184b19ccb4b808cc69f
Publikováno v:
Revista de Metalurgia, Vol 50, Iss 1, Pp e004-e004 (2014)
El análisis térmico ha sido usado como una herramienta de control de calidad desde hace tiempo en las plantas de fundición de aluminio. Recientemente ha sido reconocido que el análisis de la curva de enfriamiento y su primera derivada ofrecen alg
Externí odkaz:
https://doaj.org/article/e8271c9f0c304b5982277a0a63fa0eda