Zobrazeno 1 - 10
of 93
pro vyhledávání: '"I. J. Ross"'
Publikováno v:
Applied Engineering in Agriculture. 24:625-630
Experiments were conducted to measure the changes in bulk density of cracked corn, corn meal, soybean meal, cotton seed meal, and distillers dried grain (without solubles) when subjected to simulated overburden pressures. All materials were tested at
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::5c04536f07fd9639a8932b459e7b639e
https://doi.org/10.13031/2013.25260
https://doi.org/10.13031/2013.25260
Publikováno v:
Scopus-Elsevier
Results of resonant column tests on 23 specimens of bulk wheat, showing effects of strain amplitude, confining stress, wheat type (hard and soft red winter wheat), wheat density, and moisture content on wheat damping capacity are presented, along wit
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::5451d7c1a8117285111cc163c399c449
https://doi.org/10.13031/2013.13308
https://doi.org/10.13031/2013.13308
Publikováno v:
Transactions of the ASAE. 41:1807-1815
Wall loads were measured in a model bin 2.44 m in diameter and 7.3 m tall equipped with a bottom unloading wall flume. The results were then compared to the wall loads measured during unloading of this same bin without the flume. During most of unloa
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::1f2e4253de09e363e4de5059e72a06e6
https://doi.org/10.13031/2013.17334
https://doi.org/10.13031/2013.17334
Publikováno v:
Scopus-Elsevier
The spatial arrangement of individual grains forming a bed of granular solids influences the mechanical behavior of the granular material. This article summarizes the effects of the spatial arrangement of wheat in bulk on the angle of internal fricti
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::6809fb5e2a4fb31d7f45c45eb71dc980
https://doi.org/10.13031/2013.27501
https://doi.org/10.13031/2013.27501
Publikováno v:
Transactions of the ASAE. 39:649-653
Test blades of galvanized steel were pulled through wheat to study the frictional behavior between wheat and the blades. The effects of wear and dust accumulation on wheat grains were studied by pulling three blades through grain samples which had be
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::ce2304e9f1e657caa0335889179835a4
https://doi.org/10.13031/2013.27548
https://doi.org/10.13031/2013.27548
Publikováno v:
Transactions of the ASAE. 39:1145-1149
The vertical loads imposed on a full-scale bin floor by wheat were measured during a storage time of 6 h. The floor loads were determined to be dependent on the length of storage time. A linear regression model was developed to predict this change in
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::6d4c5295fda10ef059e85b659da44223
https://doi.org/10.13031/2013.27606
https://doi.org/10.13031/2013.27606
Publikováno v:
Scopus-Elsevier
The dynamic response of the vertical wall and bottom loads at the start of grain discharge was influenced by wall configuration and filling method for model bins in plug flow. Experiments were conducted with wheat in cylindrical smooth wall and corru
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::da5cbcf0722333349918737e838e13fc
https://doi.org/10.13031/2013.28016
https://doi.org/10.13031/2013.28016
Publikováno v:
Scopus-Elsevier
Wall and bottom loads and the resultant moment of force have been compared for two similar model bins. Corrugated wall bins of 0.6 and 1.2 m in diameter with height-to-diameter ratios of 4 were used in the experiments. The wall and flat bottom of the
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::45bfffa012451370a956e1a1543132f3
https://doi.org/10.13031/2013.28017
https://doi.org/10.13031/2013.28017
Publikováno v:
Transactions of the ASAE. 37:1613-1619
Flat-bottom cylindrical grain bins are subjected to unique loads and pressures during the filling process. The vertical and lateral loads imposed on a bin wall and the vertical load on a bin floor by wheat during filling were measured. The radial dis
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::3e69ccfe5ab731484ef151525b96fb4a
https://doi.org/10.13031/2013.28248
https://doi.org/10.13031/2013.28248
Publikováno v:
Transactions of the ASAE. 36:1915-1918
Tests were conducted to study sources of variation in the dynamic coefficient of friction of corn on galvanized steel. The factors analyzed were grain moisture content, grain pressure, and number of trials. The coefficient of friction was statistical
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::b6e7e09d497c42578088c85e29f5febe
https://doi.org/10.13031/2013.28542
https://doi.org/10.13031/2013.28542