Zobrazeno 1 - 10
of 20
pro vyhledávání: '"Hyung-Bock Lee"'
Publikováno v:
Ceramics International. 38:S577-S580
Effects of crystal structure on the photoluminescence (PL) and photocurrent (PC) characteristics of Sr 1− x Ba x Al 2 O 4 : Eu 2+ , Ni 2+ phosphors were investigated as a function of Ba 2+ content (0.1 ≤ x ≤ 0.5) and/or type of doping ions. PL
Publikováno v:
Integrated Ferroelectrics. 115:1-8
The characteristics of photocurrent of Sr1-x Ca x Al2O4: Eu2+, Ni2+ prepared by sol-gel method were investigated as a function of Ca2+ content (0 ≤ x ≤ 0.35) and/or type of doping ions. For the specimens sintered at 1350°C for 5 h, a monoclinic
Autor:
Do Kyung Kim, Shanghua Li, Mamoun Muhammed, Hyung-Hwan Kim, Hyung Bock Lee, Hyuck Kim, Meng Meng Lin
Publikováno v:
J. Mater. Chem.. 20:444-447
Completely water dispersible and highly monodispersed superparamagnetic iron oxide nanoparticles (SPIONs) were prepared. The surface of SPIONs was modified with dual-crosslinked amine activated dextran (AMD) and chemical cleavage of AMD on SPIONs was
Publikováno v:
Journal of the Korean Ceramic Society. 46:679-684
Phosphors of Eu 2+ doped alkaline earth aluminates MAl₂O₄:Eu 2+ (M=Sr, Ba, Ca) have been prepared by sol-gel process and their characterization of photoluminescence and photocurrent properties have been performed. The phosphors prepared by sol-ge
Publikováno v:
Journal of the Korean Ceramic Society. 45:815-820
The microstructure and mechanical properties of TiB₂/Si nanocomposites based on the Ti-Si-B system, consolidated by spark plasma sintering of mechanically alloyed activated nanopowders, have been characterized. Mechanical Alloying was carried out i
Publikováno v:
Journal of the Korean Ceramic Society. 45:191-195
Highly ordered silver nanowire with a diameter of 10 ㎚ was arrayed by electroless deposition in a porous anodic aluminum oxide (AAO) membrane. The AAO membrane was fabricated electrochemically in an oxalic acid solution via a two-step anodization p
Autor:
Chang Wook Kim, Hyung-Bock Lee
Publikováno v:
Journal of the Korean Ceramic Society. 43:646-652
Several oxynitride glasses were fabricated by means of adding Si3N4 powders as nitrogen source to Ca-Al-Si-O-N (CAS) and Mg-Al-Si-O-N (MAS) glass powders, and heat-treated in graphite crucible at 1600 ℃ for 1 h. The physical and mechanical properti
Autor:
Hyung-Bock Lee, Chang Wook Kim
Publikováno v:
Journal of the Korean Ceramic Society. 43:653-659
The glass-SiC composites have been manufactured via viscous flow of glass for investigating their sinterability and various properties. The relative density of 99.6% could be achieved when 5 wt% SiC was mixed with glass powder, glass-rearranged at 46
Autor:
Hyung-Bock Lee, Chang Wook Kim
Publikováno v:
Journal of the Korean Ceramic Society. 43:660-665
The mechanical properties of Al₂O₃-SiC composites manufactured with adding various amount and size of SiC particles have been measured and analyzed. Generally, the elastic modulus of the composites shows about 50% less than that of PL-8 (45 wt% A
Autor:
Do Kyung Kim, Muhammet S. Toprak, Mamoun Muhammed, Maria Mikhaylova, Yun Suk Jo, Steven J. Savage, Thomas Tsakalakos, Hyung Bock Lee
Publikováno v:
Solid State Phenomena. :165-168
The influence of mixtures of Ni0.5Zn0.4Cu0.1Fe2O4, CoFe2O4, and graphite on the permeability, permittivity and microwave absorption properties in a composite embedded with insulating polymeric matrix, that can be used for X- and P-band radar absorpti