Zobrazeno 1 - 10
of 19
pro vyhledávání: '"Hyeong Min Yoo"'
Publikováno v:
Applied Sciences, Vol 10, Iss 20, p 7039 (2020)
In the liquid composite molding process, a binder is used to fix the preform. In this study, the influence of a non-reactive epoxy binder was investigated. To allow the measurement of permeability, the preform specimen was produced under three prefor
Externí odkaz:
https://doaj.org/article/ed51b6aa3560461093815320139c46fb
Autor:
Beom-Joo Lee, Hyeong-Min Yoo
Publikováno v:
Polymers, Vol 16, Iss 7, p 933 (2024)
Liquid silicone rubber (LSR) garners attention across a diverse range of industries owing to its commendable fluidity and heat resistance. Nonetheless, its mechanical strength and oil resistance fall short compared to other rubbers, necessitating enh
Externí odkaz:
https://doaj.org/article/381f01eea2f84df086cca03fa3d31ab2
Publikováno v:
Applied Sciences, Vol 13, Iss 7, p 4332 (2023)
When carbon-fiber-reinforced plastic (CFRP) and steel are joined using blind riveting and bolting, fastener inclination occurs due to the clearance between the fastener and hole. To this end, this study investigated the unavoidable occurrence of clea
Externí odkaz:
https://doaj.org/article/3e8350965b8f431fbfcd135e5b97ab10
Publikováno v:
Applied Sciences, Vol 12, Iss 10, p 4906 (2022)
In this paper, an epoxy resin-based carbon fiber reinforced composite (CFRP) bar pultrusion system using a closed impregnation device which has various advantages in process compared to traditional open bath type pultrusion system was developed, and
Externí odkaz:
https://doaj.org/article/404687fe45fc46b0a0f4fcbe9ccd4b40
Publikováno v:
ACS Applied Polymer Materials. 4:7397-7407
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::930c0f7b58dc48f2d94175e76bf61202
https://doi.org/10.1021/acsapm.2c01158
https://doi.org/10.1021/acsapm.2c01158
Publikováno v:
Applied Sciences, Vol 11, Iss 8, p 3575 (2021)
With the rapid development of high-performance fibers such as carbon, enhanced glass fibers in structural applications, the use of fiber-reinforced composite (FRC) materials has also increased in many areas. Liquid composite molding (LCM) is a widely
Externí odkaz:
https://doaj.org/article/2efcdb2aff6548d7b1811df9ccb04620
Publikováno v:
e-Polymers, Vol 21, Iss 1, Pp 702-709 (2021)
The aim of this study was to determine the rheological property and crystallization behavior of polylactic acid (PLA) with improved heat resistance (Ingeo™ Biopolymer 4032D) through investigation of the melt viscosity and crystallization kinetics o
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::f1cfd68739ec5d627312350e13d3f9cf
https://doaj.org/article/2c5fd1e34df842c6bfe0c5f243014bde
https://doaj.org/article/2c5fd1e34df842c6bfe0c5f243014bde
Publikováno v:
Sensors and Actuators A: Physical. 356:114363
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::8b1e38326b8dafb6b39d5dc4fadccae4
https://doi.org/10.1016/j.sna.2023.114363
https://doi.org/10.1016/j.sna.2023.114363
Publikováno v:
Journal of Polymer Engineering. 41:184-191
The ruthenium (Ru) catalyst is the most recently developed poly dicyclopentadiene (p-DCPD) polymer catalyst known to promote stable reactions, even upon contact with oxygen. However, the experimental results showed that exposure times exceeding three
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::52ec5e5343a674826a60cd36a2a903f5
https://doi.org/10.1515/polyeng-2020-0157
https://doi.org/10.1515/polyeng-2020-0157
Publikováno v:
Journal of the Mechanical Behavior of Biomedical Materials. 138:105610
Conductive hydrogels attract the attention of researchers worldwide, especially in the field of flexible sensors like strain and pressure. These flexible materials have potential applications in the field of electronic skin, soft robotics, energy sto
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::005c367f3521ec2ce08ff1c3e178aa90
https://doi.org/10.1016/j.jmbbm.2022.105610
https://doi.org/10.1016/j.jmbbm.2022.105610