Zobrazeno 1 - 6
of 6
pro vyhledávání: '"Hui Yong Rong"'
Autor:
Xiao Yong Ren, Zhi Jian Peng, Cheng Biao Wang, Hui Yong Rong, He Zhuo Miao, Ying Peng, Zhi Qiang Fu, Long Hao Qi
Publikováno v:
Key Engineering Materials. :556-560
Binderless WC-based cemented carbides with different fractions (0-9 wt.%) of ZrC nanopowder were fabricated through spark plasma sintering at 1600 °C under a uniaxial pressure of 50 MPa. The addition effect of ZrC nanopowder on the phase composition
Autor:
Zhi Jian Peng, Cheng Biao Wang, Zhi Qiang Fu, He Zhuo Miao, Ying Peng, Xiao Yong Ren, Long Hao Qi, Yue Wen, Hui Yong Rong
Publikováno v:
Key Engineering Materials. :928-931
WC-Ni-SiCw alloys were prepared through hot-pressed sintering by using WC, Ni, VC, TaC and SiC nano-whisker as raw materials. The influence of SiC whisker addition on the microstructure and mechanical properties of the as-prepared WC-Ni alloys was in
Autor:
Hui Yong Rong, Zhi Jian Peng, He Zhuo Miao, Zhi Qiang Fu, Cheng Biao Wang, Long Hao Qi, Xiao Yong Ren, Ying Peng
Publikováno v:
Key Engineering Materials. :932-935
TiCN-based cermets with different amounts of SiC nano-whiskers were prepared by spark plasma sintering. The microstructure and mechanical properties of the as-prepared cermets were investigated. X-ray diffraction revealed that there were no SiC peaks
Autor:
Long Hao Qi, Hui Yong Rong, Zhi Jian Peng, Zhi Qiang Fu, Ying Peng, Xiao Yong Ren, Cheng Biao Wang, He Zhuo Miao
Publikováno v:
Key Engineering Materials. :924-927
Ultrafine WC-Ni cemented carbides with addition of SiC whisker (SiCw) were fabricated by spark plasma sintering. The microstructure and mechanical properties of the fabricated cemented carbides were investigated. It was found that the addition of SiC
Autor:
Xiang Yu, Zhi Jian Peng, Wen Yue, Xu Ping Lin, Zhi Qiang Fu, Jie Li, Hui Yong Rong, Cheng Biao Wang
Publikováno v:
Advanced Materials Research. 177:125-128
This work investigated the wear behavior of cemented carbide cermet YG8B under different concentrations of abrasive slurries using a modified ASTM B611 wet sand rubber rimmed wheel test system with a load of 225 N. The angular sand abrasives involved
Autor:
Zhi Yuan Wang, He Zhuo Miao, Hui Yong Rong, Xiao Yong Ren, Cheng Biao Wang, Zhi Qiang Fu, Zhi Jian Peng, Long Hao Qi
Publikováno v:
Advanced Materials Research. 177:121-124
Through a modified ASTM B611 wet sand rubber rimmed wheel test system (model: MLS-225), the wear resistance of commercially bought TiCN cermets FD22 was studied with water-based slurries of abrasive sands. The applied abrasives were angular sands of