Zobrazeno 1 - 10
of 20
pro vyhledávání: '"Huaqiang Lin"'
Publikováno v:
Materials Science and Engineering: A. 745:63-73
An extruded profile of Al-Mg-Si alloy was metal-inert-gas-welded (MIG-welded) with an ER5356 filler wire and the microstructures, mechanical properties and fatigue behavior of the joints were investigated. Compared with the base material (BM), coarse
Publikováno v:
Materials Characterization. 146:159-168
AA 7055-T6 and AA 7055-T4 aluminium alloy sheets were friction stir welded to investigate the impact of initial base metal temper on microstructure, hardness and tensile properties of the joints. In the joint of alloy in T6 temper (T6-joint), the har
Publikováno v:
Rare Metals. 42:2057-2067
Microstructure, mechanical properties and stress corrosion behavior of friction stir welded (FSWed) Al–Mg–Si alloy were investigated. The average grain sizes of shoulder-affected zone (SAZ), nugget zone (NZ), heat-affected zone (HAZ) and base mat
Publikováno v:
Lin, H, Wu, Y, Liu, S & Zhou, X 2018, ' Effect of cooling conditions on microstructure and mechanical properties of friction stir welded 7055 aluminium alloy joints ', Materials Characterization, vol. 141, pp. 74-85 . https://doi.org/10.1016/j.matchar.2018.04.029
The microstructure and mechanical properties of friction stir welded 7055 aluminium alloy under air cooling and water cooling were investigated by means of hardness and tensile testing, optical microscopy and transmission electron microscopy. Water c
Publikováno v:
Transactions of Nonferrous Metals Society of China. 28:829-838
The effect of different homogenization treatments on the microstructure and properties of the 7N01 aluminum alloy was investigated using hardness measurements, electrical conductivity measurements, tensile and slow strain rate tests, electron probe m
Publikováno v:
Materials & Design, Vol 132, Iss, Pp 119-128 (2017)
The effects of quench-induced precipitation on microstructure and mechanical properties of 7085 aluminum alloy were investigated by means of hardness test, tensile test, optical microscopy, conventional and high resolution transmission electron micro
Publikováno v:
Materials Science and Engineering: A. 675:280-288
The effect of three-stage homogenization on mechanical properties and stress corrosion cracking of Al-Zn-Mg-Zr alloys has been investigated. The results reveal that the interface of η phases provide the favorable sites for Al 3 Zr dispersoids under
Autor:
Shengdan Liu, Yu Dong, Lingying Ye, Huaqiang Lin, Jianguo Tang, Yong Zhang, Xiaodong Liu, Bin Ke
Publikováno v:
Journal of Alloys and Compounds. 845:156113
The hot deformation behavior and microstructural evolution of homogeneous annealed AA7020 aluminum alloy were investigated by isothermal compression tests over the temperatures range of 673–793 K and strain rates range of 0.001–1 s−1. According
Autor:
Lingying Ye, Chuqi Jiang, Yunlai Deng, Xinming Zhang, Shengdan Liu, Wenqing Yang, Jianguo Tang, Huaqiang Lin
Publikováno v:
High Performance Structural Materials ISBN: 9789811301032
The microstructures and stress corrosion behaviors of the welded joint in a MIG welded Al–Zn–Mg alloy were investigated by slow strain rate test and OM, EBSD, TEM observation. The results indicated that the stress corrosion cracking index of weld
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::73d7ea45c819f28aa45dd78a09901ab6
https://doi.org/10.1007/978-981-13-0104-9_34
https://doi.org/10.1007/978-981-13-0104-9_34
Publikováno v:
High Performance Structural Materials ISBN: 9789811301032
The correlation between chemical composition, multiphase microstructure and stress corrosion performance of Al–Zn–Mg alloy with different thickness coarse grain layers was studied by optical microscopy (OM), scanning electron microscope (SEM), tr
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::8641f105e48a0ca59141134965064747
https://doi.org/10.1007/978-981-13-0104-9_35
https://doi.org/10.1007/978-981-13-0104-9_35