Zobrazeno 1 - 10
of 14
pro vyhledávání: '"Hou-Jen Chu"'
Autor:
Hou-jen Chu, 朱厚任
96
In this project, the simulations were carried out in four different conditions, the properties of sintered wicks using in heat pipe and its working life time have been studied. The sintered wick structure were produced by using three differen
In this project, the simulations were carried out in four different conditions, the properties of sintered wicks using in heat pipe and its working life time have been studied. The sintered wick structure were produced by using three differen
Externí odkaz:
http://ndltd.ncl.edu.tw/handle/11885560483143884840
Publikováno v:
Surface and Coatings Technology. 337:544-551
TiO2 has recently been attracted for use as anode material in lithium ion batteries (LIBs). However, its drawbacks are poor electrical conductivity and low intrinsic diffusivity of Li ions. In this work, a TiO2-carbon nanotubes (CNTs) anode layer was
Publikováno v:
Surface and Coatings Technology. 324:92-98
Conventional anodized aluminum with diverse colors by surface dyeing has recently become widespread for consumer electronic appliances. Satisfactory performance, though, it failed to present good enough protection purpose. On the contrary, micro-arc
Autor:
Yu Jen Chen, Hou Jen Chu, Shin Hung Lin, Chih Cheng Cheng, Chiao Fang Hung, Hsin-Min Wang, Tien-Kan Chung, Po Jung Lin
Publikováno v:
ASME-JSME 2018 Joint International Conference on Information Storage and Processing Systems and Micromechatronics for Information and Precision Equipment.
In this paper, we report a novel nanoelectromagnetic system using multiferroic/magnetoelectric Ni-nano-chevron/PMN-PT heterostructure to demonstrate an electric-field-controlled permanent magnetic single-domain transformation. The heterostructure con
Publikováno v:
Thin Solid Films. 579:14-20
Titanium dioxide has recently attracted attention as an anode material for use in lithium-ion batteries, owing to its high reversible capacity and durable charge/discharge characteristics. The aim of the study is to combine micro-arc oxidation (MAO)
Autor:
Hou Jen Chu, Tzu Wei Liu, Wensyang Hsu, Chin Chung Chen, Meng Shiue Lee, Tze-Hong Wong, Po Chen Yeh, Yuh-Shyong Yang, Tien-Kan Chung
Publikováno v:
IEEE Sensors Journal. 14:4402-4410
At present, intramedullary interlocking nails are widely used for bone-fracture fixation in orthopedic surgeries. Surgeons often use X-ray imaging to find the actual location of the distal screw-holes of the nail after the nail is inserted into the m
Publikováno v:
Journal of Biomedical Materials Research Part B: Applied Biomaterials. :1023-1030
Reducing the osseointegration time for biomedical titanium implants in surgical patients is an important goal. However, a huge controversy exists over the effectiveness of osseointegration of the surface layer by plasma electrolytic oxidation (PEO),
Autor:
Po Jung Lin, Shin Hung Lin, Chih Cheng Cheng, Yu Jen Chen, Chiao Fang Hung, Hou Jen Chu, Tien-Kan Chung
Publikováno v:
ASME 2016 Conference on Information Storage and Processing Systems.
In this paper, we report an electrical control of magnetic multi-domain-walls transformation in an N-shape-patterned Ni nanostructures on a piezoelectric [Pb(Mg1/3Nb2/3)O3]0.68–[PbTiO3]0.32 substrate. Based on the converse-magnetoelectric-effect in
Publikováno v:
SPIE Proceedings.
We report an electromagnetic inductance/coil-based non-destructive method to target distal screw-holes in an intramedullary interlocking-nail surgical operation for fixing a long-bone fracture. The method is a radiation-free approach addressing the o
Autor:
Hou Jen Chu, Po Jung Lin, Chiao Fang Hung, Yu Jen Chen, Hsin Min Wang, Tien-Kan Chung, Shin Hung Lin
Publikováno v:
Applied Physics Express. 9:043003
We report a magnetic-field-assisted electric-field-controlled approach to rotate magnetic stripe domains in a magnetoelectric Ni-microbar/[Pb(Mg1/3Nb2/3)O3]0.68–[PbTiO3]0.32 heterostructure. A magnetic field is applied for magnetizing the microbar