Zobrazeno 1 - 10
of 65
pro vyhledávání: '"Hilmi Amiruddin"'
Publikováno v:
Tribology Online, Vol 19, Iss 1, Pp 74-86 (2024)
This study examined the effects of polytetrafluoroethylene (PTFE) and Eichhornia crassipes carboxymethyl cellulose (EC-CMC) polymers in base jatropha lubricant and employed commercial shell lubricant as the reference. Wear reduction and coefficient o
Externí odkaz:
https://doaj.org/article/8ad10b12e359454d828fe62404b9484d
Autor:
Mohamad Nordin Mohamad Norani, Muhammad Ilman Hakimi Chua Abdullah, Mohd Fadzli Bin Abdollah, Hilmi Amiruddin, Faiz Redza Ramli, Noreffendy Tamaldin
Publikováno v:
Jurnal Tribologi, Vol 29, Pp 11-30 (2021)
In fused filament fabrication (FFF); the process of 3D printing using polymer-based materials; specialised and functional parts are designed and manufactured for use in engineering and medical industries. Recognizing the impact on the mechanical and
Externí odkaz:
https://doaj.org/article/34130e5a7a764fef8bddc44ef93344bb
Autor:
Martini Mohmad, Mohd Fadzli Bin Abdollah, Department of Machinery and Equipment Technology, Middle Technical University,, Noreffendy Tamaldin, Hilmi Amiruddin, Mohd Rody Bin Mohamad Zin
Publikováno v:
Jurnal Tribologi, Vol 17, Pp 77-92 (2018)
Palm kernel activated carbon is one of the potential self-lubricating materials. Therefore, in this study the effect of palm kernel activated carbon composition on the physical-mechanical properties of palm kernel activated carbon reinforced polymeri
Externí odkaz:
https://doaj.org/article/261c0c3db53040bf9d4f009569e58e72
Autor:
Dayang Nor Fatin Mahmud, Mohd Fadzli Bin Abdollah, Nor Azmmi Bin Masripan, Noreffendy Tamaldin, Hilmi Amiruddin
Publikováno v:
Friction, Vol 7, Iss 3, Pp 227-236 (2018)
Abstract The objective of this work is to investigate the influence of contact pressure and sliding speed on the coefficient of friction and wear of an activated carbon-epoxy composite derived from palm kernel under dry sliding conditions. A wear mod
Externí odkaz:
https://doaj.org/article/a2d3cb10e4cc49ed9339720a26fad1d4
Publikováno v:
Tribology Online, Vol 10, Iss 6, Pp 428-433 (2015)
The aim of this study was to investigate the effect of temperature on the tribological properties of Palm Kernel Activated Carbon-Epoxy (PKAC-E) composite. All specimens were formed into 10 mm diameter pins of 30 mm length, using a hot compaction tec
Externí odkaz:
https://doaj.org/article/a57f7768f3e44da2a3973801d9df3708
Publikováno v:
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 237:589-600
This study proposes the formulation of a novel grease material using biological resources, which displayed satisfactory mechanical and lubrication properties. This bio-grease material was formulated using non-edible vegetable oils (such as castor, ne
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::d3ab6c3a3ebb78f464f74e7bafa5d19e
https://doi.org/10.1177/13506501221121904
https://doi.org/10.1177/13506501221121904
Autor:
Juliana Basiron, Mohd Fadzli Bin Abdollah, Muhammad Ilman Hakimi Chua Abdullah, Hilmi Amiruddin
Publikováno v:
Lubrication Science.
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::a3cd3865f3f6fa4ff58fb4f868825dc1
https://doi.org/10.1002/ls.1654
https://doi.org/10.1002/ls.1654
Publikováno v:
Evergreen. 8(2):414-420
The present paper assesses the empirical performance of a four-cylinder CNGDI engine with a vaned diffuser turbocharger compressor. This evaluation was performed to compare injection timing operating characteristics of engines coupled with vaneless a
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::b7bb0df4102215d6d10c64ab638ff9ee
http://hdl.handle.net/2324/4480723
http://hdl.handle.net/2324/4480723
Publikováno v:
Industrial Lubrication and Tribology. 73:614-620
Purpose This study aims to scrutinise the impact of fibre length and its composition on the tribological attributes of oil palm fibre (OPF) polymeric composite as an alternative brake friction material. Design/methodology/approach Fabrication of the
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::b19b5cfcf15374330f3b6054c0c7d5cf
https://doi.org/10.1108/ilt-01-2021-0019
https://doi.org/10.1108/ilt-01-2021-0019
Publikováno v:
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 237:1275-1275
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::90a18208349217623d8857aa9a94b007
https://doi.org/10.1177/13506501231174134
https://doi.org/10.1177/13506501231174134